Jensen Portable DVD Player DV354 User Manual

DV354  
Owner’s Manual  
Thank You!  
Thank you for choosing a JENSEN product. We’ve tried to make the instructions in this owner’s  
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use  
all of the features of your new JENSEN DV354 Mobile Multimedia DVD/CD/MP3 Player for  
maximum enjoyment.  
MODE  
VOL  
VIDEO IN 2  
L
AUDIO IN 2  
R
Introduction ..................................................................................................................................... 2  
Preparation...................................................................................................................................... 2  
Installation...................................................................................................................................... 3  
Wiring.............................................................................................................................................. 5  
Controls and Indicators................................................................................................................... 7  
Basic Operation ............................................................................................................................. 9  
Disc Operation ................................................................................................................................ 9  
Setup Menu................................................................................................................................... 13  
Disc Symbols and Properties........................................................................................................ 14  
Troubleshooting ............................................................................................................................ 15  
Specifications................................................................................................................................ 16  
Warranty........................................................................................................................................ 16  
SEL  
MUTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Expand Contents

DV354  
CAUTION! Be careful not to damage the vehicle’s wiring.  
Installation  
DIN Front-Mount Installation  
3. Place the unit in front of the dashboard opening so the wiring can be brought through the  
mounting sleeve.  
1. Use the supplied release keys to remove the half-sleeve from the unit.  
4. Complete wiring connections (see “Wiring” on page 5).  
5. After completing the wiring connections, turn the unit on to confirm operation (ignition switch  
must be on). If unit does not operate, recheck all wiring until problem is corrected. Once the  
unit is properly operating, turn off the ignition switch and proceed with final mounting of the  
chassis.  
6. Carefully slide the DVD player into the half-sleeve making sure it is right-side-up until it is fully  
seated and the spring clips lock it into place.  
NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 30°  
of horizontal. Make sure the unit is mounted within this limitation.  
M
O
D
E
V
OL  
D
V
7. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the  
chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure  
part of the dashboard either above or below the unit using the screw and hex nut provided.  
Bend the strap to position it as necessary.  
D
/
CD  
S
E
/
L
M
P3  
PLA  
YER  
IR  
M
UTE  
V
ID  
E
O
IN  
2
L
A
U
D
IO  
IN  
2
R
CAUTION! The rear of the unit must be supported with the strap to prevent damage to the  
dashboard from the weight of the unit or improper operation due to vibration.  
8. Replace any items you removed from the dashboard.  
2. Install the half-sleeve.  
a. Install adapter if necessary (optional).  
DIN Front-Mount Installation  
b. Install half-sleeve into adapter or dashboard using the supplied screws. Do not force the  
sleeve into the opening or cause it to bend or bow.  
7
8
c. Locate the series of bend tabs along the top, bottom and sides of the mounting sleeve.  
With the sleeve fully inserted into the dashboard opening, bend as many of the tabs  
outward as necessary to firmly secure the sleeve to the dashboard.  
Install Half-Sleeve  
2c  
M
ODE  
4
V
O
L
DV  
D
/
C
D
SEL  
/
M
P
3
P
L
A
Y
E
R
IR  
M
U
T
E
2a  
VIDEO  
IN  
2
L
A
UDIO  
IN  
2
R
3
2b  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
DIN Rear-Mount Installation  
Removing the Unit  
With some vehicles, you can use the screw holes located on both sides of the unit to fasten the  
unit to the factory radio mounting brackets supplied with your vehicle. To install this unit using  
factory mounting plates, perform the following steps:  
1. Make sure the ignition is turned off, then disconnect the cable from the vehicle battery’s  
negative (-) terminal.  
2. Remove the metal strap attached the back of the unit (if attached).  
3. Lift the top of the outer trim ring then pull it out to remove it.  
1. Remove trim ring.  
4. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then  
pull the unit out of the dashboard.  
NOTE: The outer trim ring, sleeve and the metal strap are not used for DIN rear-mount  
installation.  
2. Align the screw holes on the bracket with the screw holes on the unit, then tighten the screws  
(5x5mm) on each side.  
Removing the Unit  
3. Reinstall the dash panel.  
DIN Rear-Mount Installation  
M
O
D
E
VOL  
D
V
D
/
CD  
S
E
/
L
MP3  
PLA  
YER  
IR  
MUTE  
V
ID  
E
O
IN  
2
L
A
U
D
IO  
IN  
M
ODE  
V
O
L
DV  
D
/
C
SEL  
D
/
M
P
3
P
L
A
Y
E
R
IR  
M
U
T
E
VIDEO  
IN  
2
L
AUDIO  
IN  
2
2
R
1
3
Reconnecting the Battery  
When wiring is complete, reconnect the battery negative terminal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Wiring  
Power/Accessory Connections  
1. P.A. – Connect to PADIN4.  
2. REMOTE CONTROL EXTENDER – Position extender where you are  
likely to use the remote control. Point remote at eye to control the unit.  
3. CONSTANT POWER WIRE (yellow) – Connect the 12V PLUS constant  
power wire to a live 12 volt wire in the vehicle. Before making a  
connection, check that the wire you intend to connect it to is always live,  
even when the car’s ignition is turned off. If a live wire is not found, route  
the wire to the car’s fuse block and connect it to a live circuit there.  
4. ACC POWER WIRE (red) – Connect to a +12 volt circuit that is only live  
when the ignition is on. The best connection point is at the car’s fuse block  
at the “RADIO” or “ACCESSORY” identified terminals.  
1
5. GROUND WIRE (black) – Securely fasten the Ground wire to a grounded  
metal part of the car’s chassis. If you cannot find an existing bolt or screw  
to fasten it to, drill a hole in the metal and secure it with a screw. To  
ensure a good ground, remove any paint or grease from areas where the  
wire will contact the surface.  
6. DC12V OUT – Provides 12VDC at 300mA when DVD is on.  
IR REMOTE CONTROL EXTENDER EYE  
2
6
+
3
3A FUSE  
YELLOW  
4
BLACK  
1A FUSE  
5
RED  
POWER WIRING HARNESS  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Audio/Video Connections  
NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging  
the DVD player. The DV354 uses one 3 amp and one 0.5 amp ATC fuse, located in the black  
filter boxes in-line with the power wires.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Controls and Indicators  
The buttons located on the unit and the remote controls that perform the same function are  
assigned the same number for reference on the diagrams and in the text.  
Remote Control Operation  
18  
Front Panel Operation  
POWER  
EJECT  
1
3
6
11  
16  
12  
2
3
1
17  
DISPLAY  
REPEAT  
MENU  
PROGRAM  
MUTE  
MODE  
ANGLE  
ZOOM  
11  
22  
23  
25  
26  
21  
SHUFFLE  
A-B  
SUBTITLE  
19  
20  
MODE  
SETUP  
VOL  
VIDEO IN 2  
L
AUDIO IN 2  
R
5
24  
27  
RESUME  
AUDIO  
SEL  
MUTE  
OK  
29  
30  
10  
33  
TITLE  
EQ  
SEL  
31  
32  
10  
13  
14  
15  
9
8
7
6
5
4
1
4
2
5
8
0
3
6
9
8
9
4
7
VOLUME  
1. Power  
36  
2. Infrared Sensor  
3. Eject  
TRACK  
7
35  
34  
28  
4. Fast Forward/Advance Chapter  
5. Stop  
GOTO  
SLOW  
6. Pause/Play/Mute  
7. Rewind/Previous Chapter  
8. Volume Up  
37  
Using the Remote Control  
9. Volume Down  
10. Select  
Point the remote control towards the player front face remote sensor IR (2). The operation angle is  
approximately 30 degrees in each direction of the front of the remote sensor.  
11. Mode  
12. Disc Slot  
13. Video In  
14. Left Audio In  
15. Right Audio In  
16. Reset  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Remote Control Functions  
Changing the Battery  
The remote control uses a CR2025 3V button cell lithium battery. The battery compartment is  
located on the back of the remote control near the bottom edge. To replace the battery:  
Ref # Button  
Function  
1
Turn the unit ON or OFF  
/POWER  
1. Open the battery compartment cover.  
3
Eject the disc  
2. Insert the new battery. Make sure that the positive and negative terminals of the battery are  
oriented as indicated.  
/EJECT  
/TRACK  
4
5
6
7
8
Skip to the next track/chapter  
3. Close the cover.  
Stop disc playback  
Play/pause the disc (for disc play mode) and to mute the sound (for AV IN mode)  
Go to previous track/chapter  
/MUTE  
/TRACK  
Increase the volume level  
/VOLUME  
/VOLUME  
9
Decrease the volume level  
10  
11  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
SEL  
Select the desired adjustment mode. Press VOL+/- to change settings  
Change between disc (DVD/VCD/CD/MP3) play mode and AV IN mode  
Display statistical disc information during playback  
Play tracks in programed order (MP3/CD)  
MODE  
DISPLAY  
PROGRAM  
SHUFFLE  
REPEAT  
A-B  
Play tracks in random order (NOT for DVD)  
Repeat current track/chapter  
Repeat selected passage continuously  
SUBTITLE  
ANGLE  
Change the SUBTITLE language on multi-subtitle language DVD discs  
Change the viewing angle on multi-angle DVD discs  
Display the root menu stored on DVD discs/Switch between PBC ON and PBC OFF on VCD discs  
Display the SETUP menu  
MENU/PBC  
SETUP  
ZOOM  
Increase the picture size  
RESUME  
SLOW  
Resume play from stopping point  
Change to slow playback motion (VCD/DVD)  
Select items left/right and ahead/back in menu mode  
Confirm selection of track/chapter  
,
,
,
OK  
AUDIO  
Change the AUDIO sound track on multi-audio sound track DVD discs. Change the sound mode of  
VCD discs  
32  
33  
34  
TITLE  
EQ  
Display the TITLE menu stored on DVD disc  
Select the equalization mode, such as FLAT, CLAS, POP, ROCK  
Search in reverse rapidly  
/TRACK  
/TRACK  
35  
Search forward rapidly  
36  
37  
0-9  
GOTO  
Enter track/chapter number directly. Use GOTO to search.  
Used with numeric buttons to search disc  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Basic Operation  
Turning the Unit On/Off  
Reset  
The RESET button (16) is located on the front of the unit. You should engage the RESET button  
only in the following situations:  
Press the POWER button (1) on the front panel or remote control to turn the unit on/off.  
Inserting a Disc  
After initial installation when all wiring is complete  
If all function buttons become inoperable  
If an error symbol appears on the display  
Insert a disc, label side up, into the disc slot (12). The player will start playback automatically.  
Ejecting a Disc  
To reset the unit, use a ballpoint pen or a thin metal object to depress the RESET button.  
Press the EJECT button (3) to eject the disc from the slot. The unit does not have to be on to eject  
a disc.  
AV In Operation  
NOTE: Do not drive with an ejected disc in the slot.  
You can connect another audio/video system to the unit through the AV IN terminals on the back  
(AV1 INPUT) or front panel (AV2 INPUT) of the unit. Once the device is connected, press the  
MODE button (11) on the front panel or remote control to select “AV IN1” or “AV IN2” mode.  
Audio Control  
Volume  
Press the VOL button (8) to increase the volume, or the VOL button (9) to decrease the  
volume.  
Disc Operation  
Stopping Play  
Mute  
Press the stop button (5) on the front panel or remote control to stop disc play. Press the  
button (6) to resume normal playback.  
Press the MUTE button (6) to silence the audio. Press MUTE again to resume audio.  
Press the SEL button (10) on the front panel or remote control to select the desired audio  
adjustment mode. The adjustment mode will change in the following order:  
Press the stop button (5) on the front panel or remote control twice to stop the playback and  
return to the initial chapter.  
Bass  
Press SEL until “BAS” appears in the display. Press the volume buttons to adjust the Bass from +06 to -06.  
Press SEL until “TRE” appears in the display. Press the volume buttons to adjust the Treble from +06 to -06.  
Moving Through Chapters/Tracks  
Treble  
Press the  
button (4) on the unit or remote control to advance to the next chapter/track.  
Balance Press SEL until “BAL” appears in the display. Press the volume buttons to adjust the Balance from 12L to 12R.  
Press the  
button (7) on the unit or remote control to move to the previous chapter/track.  
Setting the Clock  
Fast Forward/Fast Reverse  
Press and hold the DISPLAY button (17) on the remote until the clock display flashes, then  
release. Next, press  
Continue changing the hour to move between AM and PM.  
(29) or  
(7) to adjust the hour and  
(29) or  
(4) to adjust the minutes.  
Press the  
button (35) or button (29) on the remote control to fast forward. Keep pressing and  
releasing the button to increase the rate from “2X” to “4X”, “8X” and “20X”. Press the button (6)  
to return to regular play. Press and hold to fast-forward to a specific location, then release to begin  
playback from that point.  
Mode  
Press the MODE button (11) on the front panel or remote control to switch between disc (DVD/  
CVCD/CD/MP3) mode, AV IN1, and AV IN2 mode.  
Press the  
button (34) or button (29) on the remote control to fast reverse. Keep pressing and  
releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Press the button (6)  
to return to regular play. Press and hold to fast-reverse to a specific location, then release to begin  
playback from that point.  
Equalization  
Press the EQ button (33) on the remote control to activate the equalization function. Continue  
pressing the EQ button to choose between the three equalizer modes (Clas, Pop and Rock) or to  
turn the equalizer function off.  
Slow Motion Play  
Press the SLOW button (39) on the remote control during play to activate slow motion playback.  
Each time the button is pressed, the speed changes as follows.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
DVD: PLAY > SF 1/2X > SF 1/3X > SF 1/4X > SF 1/5X > SF 1/6X > SF 1/7X > SR 1/2X > SR  
1/3X > SR 1/4X > SR 1/5 > SR 1/6X > SR 1/7X > PLAY  
Press the A-B button again once you reach the desired end point (BRPT) of the repeated  
section. The selected portion of the DVD will now repeat continuously.  
Press the A-B button again to cancel the A-B section setting and stop repeat play.  
VCD: PLAY > SF 1X > SF 2X > SF 3X > STEP BWD  
Goto Search  
Pausing Playback  
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a  
specific location on a disc:  
Press the  
button (6) on the unit or the  
button on the remote control during playback to  
temporarily stop playback. To return to normal playback, press the  
button again.  
Title/Chapter Search  
Repeating Playback  
1. Press the GOTO button (37) button to search for a specific title/chapter. The following  
Press the REPEAT button (20) on the remote control to select the repeat mode as follows:  
DVD: CHAPTER REPEAT > TITLE REPEAT > REPEAT OFF  
VCD/CD: REP-ONE > REP-ALL > REPEAT OFF  
message appears on the display: TITLE 01/01 CHAPTER 01/10.  
2. Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,  
then press the OK button (30).  
Time Search  
Select REP-ONE to continuously repeat the current chapter/track.  
1. Press the button to search for a specific time.  
Select REP-ALL to continuously repeat all chapters/tracks on the current disc. After playing  
the last chapter/track, the unit will stop and display the elapsed time.  
2. Use the numeric buttons (36) on the remote control to enter the desired title/chapter number,  
then press the OK button (30).  
NOTE: The REPEAT feature does not support VCD 2.0 (with PBC ON).  
PBC On (CD/VCD)  
PBC (Play Back Control) (VCD Only)  
1. Press the GOTO button (37) to enter the exact time. The following message appears on the  
display: GO TO -- : --.  
For VCDs with play back functionality, play back control (PBC) provides additional controls for  
VCD playback.  
2. Use the numeric buttons (36) on the remote control to enter the time, then press the OK  
button (30).  
Press the MENU/PBC button (24) on remote control to toggle the PBC function “On”/”Off”. Once  
PBC is on, playback starts from track one of the play list.  
Playing in Programmed Order (CD/MP3/VCD with PBC OFF)  
1. With play stopped, press the PROGRAM button (18) and the screen will display “PROGRAM  
Zooming  
P00:00”.  
The Zoom function allows you to increase the picture size. Press the ZOOM button (26) on the  
remote control to toggle from 2X to 3X to 4X scale and then to 1/2, 1/3 and 1/4 scale. When the  
scale is 1/4X, press ZOOM again to select OFF and cancel the Zoom function.  
2. Press the numeric button(s) (36) on the remote control to play the corresponding track in the  
selection order. For example: press 4 to play track 4 first. “01:04” appears on the display.  
3. If you want to complete program setting, press the  
button (6) on the unit or the  
button  
During Zoom mode, press the arrow (  
picture up, down, left, or right.  
,
,
,
buttons) (29) or  
/
buttons (34, 35) to move the  
on the remote control to play the tracks in programmed order.  
4. To stop programming tracks, press the  
the AUTO PLAY function.  
button twice (5), then press the  
button to start  
Random Play (CD/MP3/VCD Only)  
Press the SHUFFLE button (19) on the remote control to select and play tracks in random order.  
The display will show “SHF”. Press the button to begin the shuffled playback. Press the  
SHUFFLE button again to turn SHUFFLE off.  
On-Screen Display Function  
Press the DISPLAY button (17) during playback to display the contents of the current disc on the  
screen.  
Sectional Repeat Function (A-B)  
DVD  
Use the A-B function to define a specific area of a disc to repeat.  
1. Press DISPLAY for the first time:  
Press the A-B button (21) on the remote control to set the start point (ARPT) of the repeated  
TITLE 01/03 CHAPTER 002/025  
00:02:25  
section.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc  
currently being played will be shown on the screen, along with the elapsed time.  
SINGLE REMAIN  
– 00:03:15  
2. Press DISPLAY for the second time:  
TRACK: 01/14  
3. Press DISPLAY for the third time:  
TOTAL ELAPSED  
– 00:00:25  
3. Press DISPLAY for the third time:  
CHAPTER ELAPSED  
– 00:00:24  
TRACK: 01/14  
4. Press DISPLAY for the fourth time:  
4. Press DISPLAY for the fourth time:  
TOTAL REMAIN  
– 00:40:35  
TITLE REMAIN  
– 00:01:39  
TRACK: 01/14  
5. Press DISPLAY for the fourth time:  
5. Press DISPLAY for the fifth time to clear the message on the screen.  
TITLE ELAPSED  
– 00:01:39  
MP3  
1. Press DISPLAY for the first time:  
CHAPTER ELAPSED 00:00:25  
6. Press DISPLAY for the sixth time to clear the message on the screen.  
VCD  
2. Press DISPLAY for the second time:  
1. Press DISPLAY for the first time:  
CHAPTER REMAIN 00:04:25  
SINGLE ELAPSED  
00:00:25  
3. Press DISPLAY for the third time:  
2. Press DISPLAY for the second time:  
TOTAL ELAPSED  
– 00:00:25  
SINGLE REMAIN  
– 00:03:15  
4. Press DISPLAY for the fourth time:  
3. Press DISPLAY for the third time:  
TOTAL REMAIN  
– 00:40:35  
TOTAL ELAPSED  
– 00:00:25  
5. Press DISPLAY for the third time to clear the message on the screen.  
4. Press DISPLAY for the fourth time:  
Multi-Language Discs (DVD Only)  
TOTAL REMAIN  
– 00:03:15  
Changing Audio Language  
If you are watching a disc recorded in multiple languages, press the AUDIO button (31) on the  
5. Press DISPLAY for the fifth time to clear the message on the screen.  
remote control to choose a language. If no other languages are recorded,  
left corner of the screen.  
is displayed in the top  
CD  
1. Press DISPLAY for the first time:  
Changing Subtitle Language  
SINGLE ELAPSED  
– 00:00:25  
If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE  
button (22) on the remote control to choose the language in which you would like the subtitles to  
TRACK: 01/14  
appear. If no other languages are available,  
is displayed in the top left corner of the screen.  
2. Press DISPLAY for the second time:  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
NOTE: During VCD playback you can press the AUDIO button (31) on the remote control  
during playback to switch the sound between mono and stereo sound in the following  
order: MONO LEFT > MONO RIGHT > STEREO.  
Menu Function  
Press the MENU button (24) on the remote control while the disc is playing to display the disc root  
menu. You can navigate with the remote control navigation keys and select a feature with the OK  
button (30) on the remote control.  
Title Menu Function  
If the DVD has multiple titles recorded on the disc, you can select a specific title from the title menu  
from which to start playback.  
1. Press the TITLE button (32) on the remote control during playback to display the title menu.  
2. Select the preferred title using the remote control arrow keys (29) and confirm by pressing the  
OK (30) button.  
Viewing an Alternate Picture Angle (DVD Only)  
Some DVDs contain scenes that have been shot simultaneously from different angles. For discs  
recorded with multiple angles, press the ANGLE button (23) on the remote control to toggle  
available angles of the on-screen image. If no other angles are recorded,  
left corner of the screen.  
is displayed in the top  
Normal/PS (For 4:3 TV): Image is played back in the PAN SCAN style. (If connected to a  
wide-screen TV, the left and right edges are cut off.)  
Normal/LB (For 4:3 TV): Image is played back in letter box style. (If connected to a wide-  
screen TV, black bands appear at the top and bottom of the screen.)  
Wide (For 16:9 TV): Select this option when a wide-screen TV set is connected.  
PIC Mode Setup  
Select “AUTO” to allow the player to select the best setting for each disc.  
Select “HI-RES” for the best possible image resolution.  
Select “N-FLICKER” when the image has noise or distortion.  
ANGLE MARK Display Setup  
When set to ON while a multi-angle DVD disc is playing, the angle mark (  
screen. When set to “OFF”, the mark does not appear.  
) appears on the  
CAPTIONS Setup  
Set the CAPTIONS feature to “ON” to show captions (such as the actor’s dialogue) when a DVD  
disc is playing. Set the feature to “OFF” if you do not want captions to appear.  
SCR SAVER Setup  
Turn the SCR SAVER function “ON” or “OFF”.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DV354  
DVD SETUP MENU  
During disc play, press the DVD SETUP button (29) on the remote control to access the SYSTEM  
Table 1: System Setup Menu  
SETUP menu.  
RATING  
1 KID SAFE  
2 G  
Select the appropriate rating level for the intended audi-  
ence.  
SYSTEM LANGUAGE AUDIO  
You may override higher ratings by using your pass-  
word.  
3 PG  
4 PG13  
5 PG-R  
6 R  
TV SYSTEM  
SCREEN SAVER  
TV TYPE  
7 NC-17  
8 ADULT  
RESTORE  
DEFAULT  
Select “Reset” to restore the factory default settings for  
the Rating system only.  
PASSWORD  
RATING  
LANGUAGE SETUP  
DEFAULT  
EXIT SETUP  
OSD LAN-  
GUAGE  
ENGLISH  
Select the appropriate on-screen language for the DVD  
GERMAN  
SPANISH  
FRENCH  
Use the  
,
,
or  
cursor buttons to choose between SYSTEM, LANGUAGE, or VIDEO  
setup options.  
PORTUGUESE  
ITALIAN  
Table 1: System Setup Menu  
RUSSIAN  
ENGLISH  
GERMAN  
SPANISH  
SYSTEM SETUP  
AUDIO LAN-  
GUAGE  
Choose from audio languages contained on the DVD If  
you are watching a disc recorded in multiple languages  
TV SYSTEM  
NTSC  
The color signals are output in the standard NTSC for-  
mat.  
NOTE: Languages are DVD dependent and not all lan-  
guages may be supported.  
PAL  
The color signals are output in the standard PAL format.  
AUTO  
The color signal output is switched automatically based  
on the current video input signal - NTSC or PAL.  
FRENCH  
PORTUGUESE  
ITALIAN  
SCREEN  
SAVER  
ON  
Turn screen saver on/off.  
OFF  
RUSSIAN  
TV TYPE  
4: 3 PS  
4:3 LB  
16:9  
With 16:9 display, the left and right sides are cut off.  
With 16:9 display, the top and bottom are cut off.  
Image is presented in wide view with a 16:9 aspect  
ratio.  
PASSWORD  
_ _ _ _  
Enter a 4-digit password to activate the “Rating” feature.  
The original password is “0000”.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.