Jensen Stereo Receiver VM9020TS User Manual

VM9020TS  
Operation Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Expand Contents

VM9020TS  
PREPARATION  
Congratulations on your purchase of the Jensen VM9020TS  
Mobile Multimedia AM/FM/DVD Receiver.  
Tools and Supplies  
You will need these tools and supplies to install your  
VM9020TS:  
WARNING! To prevent damage to the touch screen  
display, do not use metal, plastic or any other object to  
attempt to operate the touch screen functions. The touch  
screen function was designed for hand/finger operation  
only.  
It’s a good idea to read all of the instructions before beginning  
the installation. We recommend having your Jensen  
VM9020TS installed by a reputable installation shop.  
Torx type, flat-head and Philips screwdrivers  
Wire cutters and strippers  
Tools to remove existing radio (screwdriver, socket  
wrench set or other tools)  
Electrical tape  
Crimping tool  
Volt meter/test light  
Crimp connections  
18 gauge wire for power connections  
16 – 18 gauge speaker wire  
Features  
ISO Double-DIN chassis  
WARNING! The monitor employs an automatic motorized  
mechanism. To prevent damage to the core mechanism,  
please do not push, pull or swivel the monitor manually.  
Light weight proprietary DVD core mechanism  
Wide screen (16:9) 6.5" TFT touch screen monitor  
280 watts total system power  
Center channel speaker output - 1 X 22 watts RMS, 40  
watts peak  
Disconnecting the Battery  
To prevent a short circuit, be sure to turn off the ignition and  
remove the negative (-) battery cable prior to installation.  
Multi-Zone media distribution  
AM / FM Tuner  
TV Tuner w/diversity antenna's  
Supports NTSC and PAL, auto negotiation  
Full, Wide, Normal and Off (Standby) screen modes  
Motorized TFT panel has 16 precise angle adjustments  
via remote control or infinitely variable manual  
adjustment from the front panel  
WARNING! Only connect the unit to a12-volt power  
supply with proper grounding.  
NOTE: If the VM9020TS is to be installed in a car  
equipped with an on-board drive or navigation computer,  
do not disconnect the battery cable. If the cable is  
disconnected, the computer memory may be lost. Under  
these conditions, use extra caution during installation to  
avoid causing a short circuit.  
WARNING! Never install this unit where operation and  
viewing could interfere with safe driving conditions.  
Auto-activated rear view camera input - Reverse gear  
over rides the TFT screen to display video from a rear  
mounted camera  
WARNING! To reduce the risk of a traffic accident (except  
when using for rear view video camera) never use the  
video display function while driving the vehicle. This is a  
violation of federal law.  
Over current motor protection for obstructed TFT panel  
Compatible optical / SD Card formats: DVD-R/RW,  
DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, HDCD,  
SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/  
WMA files burned onto a DVD+R/RW or DVD-R/RW  
and Kodak Picture CD  
WARNING! Never disassemble or adjust the unit without  
the assistance of a professional. For details, please  
consult your local car stereo specialty shop.  
SD Card slot  
Multi-language, multi-subtitle and multi-angle playback  
options  
Last position memory for optical disc.  
Parental Lock - Uses a password and disc rating set-up  
to prevent unauthorized user access from display  
content  
WARNING! To prevent injury from shock or fire, never  
expose this unit to moisture or water.  
WARNING! Never use irregular discs.  
Audio Mute  
5-Way joystick navigation  
Two remote controls - a full function front remote control  
and a limited function Kid-Zone remote control for back  
seat operation  
WARNING! To prevent damage to the mechanism inside  
this unit, avoid impact to the TFT monitor.  
Over and under voltage protection to insure the unit  
operates within designed parameters  
Damped DVD mechanism with 16Mbit flash memory  
ESP (Electronic Shock Protection) provide smooth disc  
playback under the severest road conditions  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
VM9020TS  
INSTALLATION  
This unit is designed to fit into a 2.0 DIN dashboard opening,  
found in many imported cars. The unit has threaded holes in  
the chassis side panels which may be used with the original  
factory mounting brackets of some Toyota, Nissan,  
Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the  
radio to the dashboard. Please consult with your local car  
stereo specialty shop for assistance on this type of  
installation.  
NOTE: It is the end-users responsibility to install and  
operate this unit in a manner in accordance with local,  
state and federal laws. The PARKING BRAKE wire MUST  
BE CONNECTED as directed in the manual.  
CAUTION: Do not block the cooling fan exit. If blocked,  
the unit may overheat and become damaged.  
1. Remove the existing factory radio from the dashboard or  
center console mounting. Save all hardware and brack-  
ets as they will be used to mount the new radio.  
2. Remove the factory mounting brackets and hardware  
from the existing radio and attach them to the new radio.  
Using the iAUX3 External AV Connector  
The iAUX3 allows you to connect a variety of external  
devices, including a VCR, DVD player, portable MP3 player,  
etc., to your VM9020TS without removing the radio.  
To install the iAUX3, connect it to the AUX-IN cables on the  
back of the VM9020TS (see “Wiring” on page 3), and then  
install the iAUX3 in a location convenient for plugging in  
auxiliary devices.  
ISO INSTALLATION  
Using the Cosmetic Trim Ring  
A trim ring is packaged with the VM9020TS for installation  
flexibility. The VM9020TS will fit into most import dashes with  
little or no modification to the dash board/cavity. Some US  
domestic vehicle dashes will accept a Double-DIN chassis,  
but there is usually a small gap between the radio and dash  
piece after installation is complete. In this case, use the trim  
ring to conceal any gaps that may be present.  
CAUTION: Do not exceed M5 X 6 MM screw size. Longer  
screws may touch and damage components inside the  
chassis.  
3. Place the radio in front of the dashboard opening so the  
wiring can be brought through the mounting sleeve.  
Follow the wiring diagram carefully and make certain all  
connections are secure and insulated with wire nuts or  
electrical tape. After completing the wiring connections,  
plug the ISO connectors into the mating sockets on the  
rear of the chassis. Turn the unit on to confirm operation  
(vehicle ignition switch must be “on”). If the unit does not  
operate, re-check all wiring until the problem is  
corrected.  
Replacing the Fuse  
When replacing the fuse, use a new 10A replacement fuse.  
Using a fuse with an improper rating could damage the unit  
and cause a fire.  
4. Mount the new radio assembly to the dashboard or  
center console using the reverse procedure in step 1.  
CAUTION: For proper operation of the CD player, the  
chassis must be mounted within 30° of horizontal. Make  
sure the unit is mounted within this limitation.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
VM9020TS  
WIRING  
<(//2:  
Additional  
Rear Monitor  
V,'(2ꢀOUT  
:+,7(  
5('  
HEADPHONE  
MULTIZONE  
:LUHOHVVꢀ  
+HDGSKRQH  
HEADPHONE  
MULTIZONE  
Multizone  
Video  
MILTIIZONE  
VIDEO  
<(//2:  
5DGLRꢀ$XWR$QWHQQD  
&DUꢀ33KRQH  
79ꢀ$QWWHQQDD1  
79ꢀ$QWHHQQDꢉ  
79ꢀ$QWHHQQDꢊ  
79ꢀ$QWHQQDꢋ  
%/8(  
3
AUDIO VIDEO INPUT  
3.5mm  
3.5mm  
iAUX 3  
([WHUQDOꢀ$96\VWHP  
%/8(ꢂ:+,7(  
3ꢁ&217  
%$77(5<  
([WHUQDOꢀ3RZHUꢀ$PSOLILHU  
5HDUꢀ9LHZ9LGHRꢀ  
&DPHUD  
*HDUER[ꢀ66ZLWFK  
NOTE: The white multipin connector will not be used in every installation. In this case, it  
can be cut-off and discarded. This will not void any warranty that the unit may have.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
VM9020TS  
CONTROLS AND INDICATORS  
1. POWER/MUTE  
Press the POWER/MUTE button (1) once to turn the unit on.  
Press again to mute the volume. Press and hold to turn the  
unit off.  
2. AUDIO/LOC  
Press the AUDIO/LOC button (2) to access the audio menu  
and change and/or confirm audio settings. Press and hold to  
activate or deactivate the Local (LOC) setting.  
3. VOL +  
Press to increase the volume.  
4. VOL -  
Press to decrease the volume.  
5. Joystick/ENTER  
Press in on the joystick to perform the “enter” function during  
various applications. Push the key up, down, left or right to  
perform the following tasks:  
6. Joystick/  
DVD Mode: Press once for fast forward/fast reverse.  
TUNER Mode: Press to go up one frequency step.  
MENU Mode: Press once to move the cursor up.  
TV Mode: Press once to select a stored TV channel.  
7. Joystick/  
DVD Mode: Press once for slow forward/slow reverse.  
10. TUNER  
15. CH-  
TUNER Mode: Press to go down one frequency step.  
MENU Mode: Press once to move the cursor down.  
TV Mode: Press once to select a stored TV channel.  
Press and hold the CH- button (15) to adjust the monitor  
position outward.  
Press to access the radio tuner source and then to change  
between AM and FM bands.  
Press to play the previous preset AM/FM station.  
Press to play the previous stored TV channel.  
11. MENU/SRC  
8. Joystick/  
Press to access the playing source menu.  
12. OPEN  
DVD Mode: Press once to play back previous chapter/  
track.  
16. TV  
Press to access the TV tuner source.  
Press the OPEN button (12) to activate the automatic  
mechanical system and move the TFT down, exposing the  
disc and SD card slots. Press again to close the TFT.  
TUNER Mode: Press once to auto search for the  
previous available radio station. Press and hold to  
increase the tuner frequency step-by-step.  
MENU Mode: Press once to move the cursor to the left.  
TV Mode: Press to go down one frequency step.  
17. TFT Display  
18. DVD  
Press the access the DVD player source.  
13. DISP/PIC  
19. SD  
Press the DISP/PIC button (13) to adjust the display aspect  
of the picture to one of three settings: Wide, Full or Normal.  
Press and hold to access picture settings.  
Press to access the SD card source.  
9. Joystick/  
DVD Mode: Press once to enter the next chapter or  
20. IR Remote Control Receiver  
track.  
14. CH+  
TUNER Mode: Press once to auto-search the next  
available radio station. Press and hold to decrease the  
tuner frequency step-by-step.  
MENU Mode: Press once to move the cursor to the  
right.  
Press and hold the CH+ button (14) to adjust the  
monitor position upright.  
Press to play the next preset AM/FM station.  
Press to play the next stored TV channel.  
TV Mode: Press to go up one frequency step.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
VM9020TS  
CONTROLS AND INDICATORS  
21. Disc Slot  
22. Eject Button  
Press once to eject the disc.  
Press and hold to reset the mechanism.  
23. Disc Indicator  
24. SD Card Slot  
25. Reset Button (see page 4).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
VM9020TS  
FRONT ZONE REMOTE CONTROL  
Table 1: Front Zone Remote Control Functions  
Button  
Name  
Function  
8
3
4
5
9
6
Ref #  
DVD  
VCD  
TUNER  
CD/MP3  
35  
1
MENU  
1
Enters the main menu of the  
disc  
Turns on PBC when playing  
VCD  
2
TITLE  
2
4
Enters the title menu of the  
disc  
Plays first ten seconds of  
each chapter/title  
10  
13  
28  
25  
11  
Turns the power on.  
Toggles on/off audio output.  
Press and hold to turn the  
power off.  
Turns the power on.  
Toggles on/off audio output.  
Press and hold to turn the  
power off.  
Turns the power on.  
Toggles on/off audio output.  
Press and hold to turn the  
power off.  
Turns the power on.  
Toggles on/off audio output.  
Press and hold to turn the  
power off.  
MUTE/  
7
26  
27  
15  
AUDIO  
5
6
Changes the audio language  
for disc playback  
Changes the audio language  
for disc playback  
REPT A-B  
Setup to repeat playback  
from time frame A to time  
frame B  
Setup to repeat playback  
from time frame A to time  
frame B  
12  
14  
20  
18  
17  
22  
21  
16  
34  
33  
19  
32  
REPT  
7
8
9
Repeats playback of current  
chapter  
Repeats playback of current  
chapter  
Repeats playback of current  
track  
SRC  
Selects front zone playback  
source  
Selects front zone playback  
source  
Selects front zone playback  
source  
Selects front zone playback  
source  
SUBTITLE  
Language selection for subti-  
tle  
23  
24  
DISP  
10  
11  
Displays playing information  
Displays playing information  
Displays playing information  
Display playing information  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
ANGLE  
12  
13  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
Continuously adjusts front  
panel tilt angle  
ANGLE  
ANGLE  
30  
31  
Plays back disc in different  
angle for a scene  
Plays back Picture CD with  
different angle of picture dis-  
played  
29  
14  
Fast forwards the disc con-  
tent  
Fast forwards the disc con-  
tent  
Fast forwards the disc con-  
tent  
Fast forwards the disc con-  
tent  
VOL -  
VOL +  
15  
16  
17  
Decreases volume  
Increases volume  
Decreases volume  
Increases volume  
Decreases volume  
Increases volume  
Decreases volume  
Increases volume  
Selects the previous chapter  
for playback  
Selects the previous chapter  
for playback  
Searches an available radio  
station by decreasing tuning  
frequency  
Selects the previous track for  
playback  
18  
19  
Pauses playback/starts play-  
back  
Pauses playback/starts play-  
back  
Scans FM/AM radio station;  
plays/stores radio station;  
deletes radio station  
Pauses playback/starts play-  
back  
Selects the next chapter for  
playback  
Selects the next chapter for  
playback  
Searches an available radio  
station by increasing tuning  
frequency  
Selects the next track for  
playback  
BAND  
GOTO  
20  
21  
Stops playback  
Stops playback  
Selects FM/AM band  
Stops playback  
Goes to specific time frame  
and playback  
Goes to specific time frame  
and playback  
NOTE: Your remote control may differ slightly  
from the one pictured here. The above diagram is  
for illustrative purposes only.  
22  
23  
Slow playback/slow rewind  
playback  
Slow playback/slow rewind  
playback  
ZOOM  
Zooms in/out on an image  
Zooms in/out on an image  
6
Download from Www.Somanuals.com. All Manuals Search And Download.