Jensen Stereo System JMC 1000 User Manual

R
HOME AUDIO SYSTEM WITH  
3 CD CHANGER,  
BELT-DRIVE TURNTABLE,  
DUAL CASSETTE DECK AND  
REMOTE CONTROL  
OWNER'S MANUAL  
JMC-1000  
PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT  
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Expand Contents

IMPORTANT SAFETY INSTRUCTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
!
The lightning flash with arrow-  
The exclamation point within  
WARNING: TO REDUCE THE  
RISK OF ELECTRIC SHOCK  
DO NOT REMOVE COVER  
( O R B A C K ) , N O U S E R  
SERVICEABLE PARTS INSIDE  
RE FE R S E R V I CI NG T O  
Q U A L I F I E D S E R V I C E  
PERSONNEL.  
head symbol, within an equi-  
lateral triangle is intended to  
alert the user to the presence  
of uninsulated dangerousvoltage  
within the product s enclosure  
that may be of sufficient  
magnitude to constitute a risk  
of electric shock to persons.  
an equilateral triangle is in-  
tended to alert the user to  
the presence of important  
operating and maintenance  
(servicing) instructions in  
the literature accompany-  
ing the appliance.  
"See Back of Unit"  
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain  
or moisture.  
THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, AS APPLICABLE TO THE  
APPLIANCE, STATEMENTS THAT CONVEY TO THE USER THE INFORMATION ITEMIZED IN  
THIS PARAGRAPH:  
1. Read these instructions - All the safety and operating instructions should be read before the  
appliance is operated  
2. Keep these instructions - The safety and operating instructions should be kept for future  
reference.  
3. Heed all warnings - All warnings on the appliance and in the operating instructions should be  
adhered to.  
4. Follow all instructions - All operation and use instructions should be followed.  
5. Do not use this apparatus near water - The appliance should not be used near water; for  
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a  
swimming pool, and the like.  
6. Clean only with dry cloth - The appliance should be cleaned only as recommended by the  
manufacturer.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer's  
instructions. - The appliance should be situated so that its location or position does not  
interfere with its proper ventilation. For example, the appliance should not be situated on a  
bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in  
installation, such as a bookcase or cabinet that may impede the flow of air through the  
ventilation openings.  
8. Do not install near any heat sources such as radiators, heat registers, stoves or other  
apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding type has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments / accessories specified by the manufacturer  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury  
from tip-over.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Unplug this apparatus during lightning storms or when unused for a long periods of time.  
14. Power Sources - The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance. Do not overload wall  
outlet.  
15. Wall and Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
16. Power Lines - An outdoor antenna should be located away from power lines.  
17. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not  
spilled into the enclosure through openings.  
18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
19. Servicing - The user should not attempt to service the appliance beyond that described in the  
operating instructions. All other servicing should be referred to qualified service personnel.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT. FULLY INSERT THE PLUG TO MAIN  
POWER SOCKET.  
CLASS 1 LASER PRODUCT  
CAUTION  
CLASS 1 LASER PRODUCT  
INVISIBLE LASER RADIATION  
APPAREIL LASER DE CLASSE 1  
WHEN OPENAND INTERLOCKS  
PRODUCTO LASER DE CLASE 1  
DEFEATED.  
AVOID EXPOSURE TO BEAM  
This product contains a low power Laser Device.  
Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.  
Follow the advice below for safe and appropriate operation.  
ON PROTECTION AGAINST LASER ENERGY EXPOSURE  
-
As the laser beam used in this compact disc player is harmful to the eyes, do not  
attempt to disassemble the casing.  
-
Stop operation immediately if any liquid or solid object should fall into the cabinet.  
Do not touch the lens or poke at it. If you do, you may damage the lens and the player  
may not operate properly.  
Do not put anything in the safety slot. If you do, the laser diode will be ON when the  
CD door is still open.  
This unit employs a laser. The use of controls or adjustment or performance of  
procedures other than those specified here may result in exposure to hazardous  
radiation.  
-
-
-
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPLANCE WITH FCC REGULATIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions:  
(1)  
(2)  
this device may not cause harmful interference, and  
this device must accept any interference received, including interference that may cause  
undesired operation.  
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
-
Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION FOR USE  
SPEAKER CONNECTION  
Connect each speaker to the corresponding speaker terminals on the back panel  
of the main unit. Make sure that the left speaker is connected to the left (L) speaker  
jack and the right speaker to the right (R) speaker jack.  
Right Speaker  
Left Speaker  
SPEAKER  
R
L
CONNECTING THE AC POWER CORD  
After connecting the speakers unwind the AC power cord fully and connect it to any  
convenient household AC outlet.  
NOTE:  
This product is designed to operate on normal 120V 60Hz AC only. Connecting  
this system to any other power supply could result in damage to the unit which is  
not covered by your warranty. You will note that this system is equipped with a  
polarized AC power plug having one blade wider than the other. This is a safety  
feature.  
If this plug does not fit into your existing AC outlet,  
do not try to defeat this safety feature by filing the  
wide blade to make it fit into your outlet. If this plug  
will not fit into your outlet, you probably have an out-  
dated non-polarizedAC outlet. You should have your  
AC Outlet  
outlet changed by a qualified licensed electrician.  
AC Plug  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROTECT YOUR FURNITURE !!  
This model is equipped with non-skid rubber 'feet' to prevent the product  
from moving when you operate the controls. These 'feet' are made from  
non-migrating rubber material specially formulated to avoid leaving any  
marks or stains on your furniture. However certain types of oil based  
furniture polishes, wood preservatives, or cleaning sprays may cause the  
rubber 'feet' to soften, and leave marks or a rubber residue on the furniture.  
To prevent any damage to your furniture we strongly recommend that you  
purchase small self-adhesive felt pads, available at hardware stores and  
home improvement centers everywhere, and apply these pads to the bottom  
of the rubber 'feet' before you place the product on fine wooden furniture.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS AND INDICATORS  
FRONT VIEW  
4
6
9
5
7
8
10 11  
3
12  
13  
2
14  
1
15  
25  
24  
23  
22  
16  
17  
18  
19  
20  
21  
CONTROL PANEL  
29  
30  
31  
32  
33  
28  
27  
26  
34  
35  
36  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.) POWER  
On/Off Button.  
2.) PRESET EQ Button.  
3.) FM STEREO Indicator.  
4.) STANDBY/MUTE Indicator.  
5.) ROCK Equalizer Indicator.  
6.) POP Equalizer Indicator.  
7.) Dial Scale.  
8.) LCD Display.  
9.) JAZZ Equalizer Indicator.  
10.) CLASSIC Equalizer Indicator.  
11.) Remote SENSOR.  
12.) VOLUME UP Button.  
13.) VOLUME DOWN Button.  
14.) FM MONO/HI-SPEED DUBBING (ON  
15.) BALANCE Control.  
/OFF  
) Button.  
16.) Cassette DECK B Door.  
17.) Cassette DECK B Control Keys.  
18.) CD Tray Open/Close  
19.) Disc 3 Select Button.  
20.) Disc 2 Select Button.  
21.) Disc 1 Select Button.  
22.) CD Tray.  
Button.  
23.) Cassette DECK A Control Keys.  
24.) Cassette DECK A Door.  
25.) PHONES (Headphone) Jack.  
26.) DISC SKIP Button.  
27.) PROGRAM Button.  
28.) REPEAT Button.  
29.) FUNCTION (PHONO/TUNER/TAPE/CD) Selector Switch.  
30.) STOP Button.  
31.) TUNING Control.  
32.) CD PLAY/PAUSE  
33.) BAND (FM/AM) Selector Switch.  
34.) CD SKIP/SEARCH Reverse Button.  
CD  
Button.  
35.)  
SKIP/SEARCH Forward  
Button.  
36.) INTRO Button.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK VIEW  
1
2
3
1.) FM Wire Antenna.  
2.) Speaker L / R Jacks.  
3.) AC Power Cord.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
1.) STANDBY/ON Button.  
2.) STOP Button.  
5
6
7
8
PLAY/  
PAUSE  
SKIP/SEARCH  
4
3
2
1
3.) PROGRAM Button.  
STOP  
DISC PROGRAM  
4.) CD PLAY/PAUSE  
CD  
Button.  
STANDBY/  
ON  
MUTE  
5.)  
SKIP/SEARCH  
Button.  
Button.  
VOLUME  
+
9
10  
6.) CD SKIP/SEARCH  
7.) DISC Select Button.  
8.) MUTE Button.  
11  
9.) VOLUME - Button.  
10.) VOLUME + Button.  
11.) Battery Compartment (Back Cabinet).  
BATTERY INSTALLATION  
1.) Open the battery compartment cover.  
2.) Insert two "AAA" (UM4) batteries (not included)  
to match the polarities as indicated inside the  
battery compartment.  
3.) Close the cover.  
Battery Precautions  
Replacement of batteries must be done by an adult.  
Do not mix old and new batteries.  
Do not mix alkaline, standard carbon-zinc or rechargeable nickel-cadmium  
batteries.  
The supply terminals are not to be short-circuited.  
Non-rechargeable batteries are not to be recharged.  
Exhausted batteries are to be removed.  
Only batteries of the equivalent type are to be used.  
Batteries are to be inserted with the correct polarity.  
Dispose of batteries properly. Do not dispose of batteries in fire. The batteries  
may explode or leak.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
GENERAL CONTROLS  
Preset Electronic Equalizer  
When the unit is switched"On"for the first time, the Equalizer will be in the "Flat"  
setting. Press the PRESET EQ button repeatly to select "ROCK", "POP",  
"CLASSIC" or  
"JAZZ" sound effect to suit your taste. The appropriate EQ Indicator  
lights to confirm your selection.  
Mute Button Remote Control Only  
To temporarily shut off the sound from the speakers press the MUTE button on the  
remote control. The STANDBY/MUTE indicator on front panel will flash and the  
sound will stop. Press the MUTE button again to cancel Mute and restore the  
sound. The MUTE indicator goes ff".  
"O  
Balance Control  
This control adjusts the relative volume of the left and right speakers. When this  
control is set to the center-click position you will have equal volume from both  
speakers. If your normal listening position is closer to one of the two speakers,  
rotate this control to the left or to the right until the volume from both of the speakers  
sounds the same at your normal listening position.  
FM Mono/Hi-Speed Dubbing ON /OFF  
Selector  
This button is used to select between the FM STEREO and FM MONO operation  
modes (It is also used to select either Normal Speed or High Speed tape  
dubbing.) To receive FM Stereo broadcasts this switch must be set to the STEREO  
position. However if you are listening to a distant or weak FM Stereo station  
and reception is unsatisfactory, setting the selector to the FM MONO  
may provide some improvement.  
position  
PHONES  
Jack  
The Stereo Headphone Jack is located on the left front panel. Connect a set of  
stereo headphones (not included) to this jack for private listening without disturbing  
others. The speakers are automatically disconnected when headphones are  
connected to the headphone jack.  
IMPORTANT: When using headphones always set the volume control to a low  
level before you put the headphones on. Then put the headphones on and  
gradually increase the volume to a comfortable listening level.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTENING TO THE RADIO  
1.) Slide the FUNCTION selector to the TUNER position.  
2.) Slide the BAND selector to the desired band, FM or AM.  
3.) Tune to your desired station with the TUNING control. If you have tuned to a  
FM Stereo station the FM STEREO LED Indicator will light.  
4.) Adjust the VOLUME control and EQ as desired.  
5.) When you are finished listening press the POWER button to shut the power  
"Off".  
Antenna Information  
AM - The AM antenna is inside the cabinet. IF AM reception is unsatisfactory try  
rotating the entire unit until you find the position that provides the best reception.  
FM - For best FM reception, the FM lead wire antenna, located on the back of the  
set, should fully unwound and extended.  
FM Wire Antenna  
NOTE: If you are listening to a weak FM Stereo station you can usually improve  
the reception by pressing the FM MONO selector to the  
the sound will now be mono.  
ON position, however  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING COMPACT DISCS  
IMPORTANT: This CD player can play normal CDs plus CD-R and CD-RW  
discs. However the playability of CD-R/RW discs may be affected by the type  
of software that was used in 'ripping' the tracks from the original discs and  
'burning' the tracks onto the blank media. Playability may be affected by  
the quality and condition of the blank media you use for recording. 100%  
compatibility cannot be guaranteed. This is not an indication of any problems  
with your player.  
This system features a carousel type 3-CD changer which can provide you with  
up to 3 hours of uninterrupted music playback. You may load up to 3 CDs in the  
changer for continuous playback, or you may program up to 32 tracks among all 3  
discs to be played back in the specific order you select.  
LOADING THE DISCS  
1.) Press the POWER  
button to turn the system"On".  
2.) Slide the FUNCTION selector to the CD position.  
3.) Press the  
Open/Close button to open the CD tray. When the tray opens  
two of the three CD pockets will be accessible to you. Load up to 2 CDs in the  
pockets making sure that the label side of the discs face up and that the discs  
are correctly centered in the pockets.  
4.) Press the DISC SKIP button to rotate the CD tray and expose the 3rd CD  
pocket. Insert an additional disc in the open pocket if desired.  
5. Press the Open/Close button to close  
the CD tray. The CD player will search  
for the first disc and the display will show  
the number of tracks and total playing  
time of that disc.  
NOTES:  
Keep the CD disc tray closed when the system is not in use to prevent dirt  
and dust from entering the CD mechanism.  
Never place more than one CD in the same pocket of the CD tray. If two  
discs are loaded in the same pocket, the CD mechanism may jam and /or  
the discs themselves may be damaged.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO BEGIN CD PLAYBACK  
After you have loaded up the 3 CDs in the changer:  
1.) Press the PLAY/PAUSE  
button to begin playback. The changer will search  
for the first available disc in the tray and will begin playback from Track 1 on  
the first disc.The  
number of the disc  
ALL DISC  
being played flashes  
on the display. It will  
continue playing until  
it has played all of the discs in the tray and then stops automatically.  
NOTE: To begin playback from a specific disc, press the DISC SKIP button  
on front panel or DISC button on remote control to select the desired disc,  
and then press the PLAY/PAUSE  
button. Or, press the appropriate disc  
button DISC 1, DISC 2, DISC 3. on front panel for the disc you wish to  
start. Playback will begin on Track 1 of the selected disc. It stops  
automatically after finished playing all discs.  
2.) Adjust the VOLUME and EQ control as desired.  
3.) To temporarily stop playback, press the PLAY/PAUSE  
button again. The  
" "indicator appears in the display. The disc continues to spin, but no sound  
is heard. Press the PLAY/PAUSE  
resume playback.  
button once more to cancel pause and  
ALL DISC  
4.) To stop playback before the end of a disc, press the STOP  
button.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT!!  
If the disc is smudged or scratched it may skip or stop completely. This does  
not indicate a problem with the player. If this occurs, try playing another disc.  
If that disc plays properly, you may assume that the first disc is damaged and  
unplayable.  
Simultaneous Play and Load System  
This CD changer allows you to change two discs while a third disc continues playing.  
Press the CD drawer Open/Close button during playback. The drawer will open,  
allowing you to remove two discs and insert two new discs, while the third disc  
continues to play. After loading two new discs in the tray press the  
button to close the drawer.  
Open/Close  
SKIP/SEARCH  
/
Buttons  
To skip forward or backward to the beginning of a particular track during  
playback,  
press the or SKIP/SEARCH buttons repeatedly until the desired  
track number  
appears on the display. Playback will begin on the desired track.  
To search for a particular passage on a track during playback, press and hold the  
or SKIP/SEARCH buttons. The player will search rapidly forward or  
backward.  
Release the buttons when you reach the desired point on the track  
speed playback will resume at that point.  
and normal  
NOTE: You can only skip tracks within the disc being played and cannot skip  
directly from first track to last track or vice versa.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMED CD PLAYBACK  
You can program the CD changer to play up to a total of 32 tracks on all 3 discs in  
any desired order.  
NOTE: You can not program the CD changer during playback. If a disc is  
playing press the STOP  
button first and then follow the instructions.  
1.) Press the PROGRAM button once. The PROGRAM, EDIT indicators, program  
# 01, disc # 01 appears in the display.  
2.) Press the DISC SKIP button or one of the three DISC buttons to select the  
disc which contains the first track you wish to program. Example: Disc 2.  
3.) Press the  
or  
buttons to select the first track you wish to program.  
Example: Track 8.  
4.) Press the PROGRAM button again to store the desired disc and track number  
into memory locationNumber 1. The display will change from Program Number  
01 to Program Number 02 .  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.) Use the DISC SKIP button or one of the three DISC buttons to select the disc  
containing the next track you wish to program. Example: Disc 3.  
6.) Press the  
or  
buttons to select the next track you wish to program.  
Example: Track 18.  
7.) Press the PROGRAM button again to store the desired disc and track into  
memory location Number "02".  
Repeat the above procedure until you have stored up to 32 tracks in the  
program memory.  
After all your desired tracks are programmed you may press the PROGRAM  
button to reconfirm that the information has been stored correctly.  
8.) Press the PLAY/PAUSE  
button to begin programmed playback. Playback  
will start at the first disc and track which you have programmed and will continue  
until all programmed discs and tracks (up to a total of 32) have been played.  
9.) Press the PROGRAM button and then press the PLAY/PAUSE  
you want to listen the programmed tracks again.  
button if  
NOTE: If you press the  
player will skip forward or backward to the next track and disc which you  
have  
or  
buttons during programmed playback, the  
programmed, but not the next track in sequence of the disc which is  
being played.  
TO CLEAR THE PROGRAM MEMORY  
If the disc is playing, press the STOP  
button to stop the discs. Then press  
the PROGRAM button and then press the STOP  
button again, switch the  
FUNCTION selector to other position, or turn power "Off" to clear the program  
memory.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPEAT Playback On Front Panel Only  
This system has a four-way repeat function which allows you to continuously repeat  
one track, one disc, all discs, or all of the tracks which you have programmed.  
One Track Repeat  
1.) Press the REPEAT button until the "REPEAT 1" Indicator appears in the CD  
display.  
2.) Use the  
or  
buttons (and the "DISC SKIP" button, if necessary) to select  
the exact track that you wish to repeat.  
3.) Press the PLAY/PAUSE  
button to begin one track repeat. The selected  
track will begin playing. It will repeat continuously until repeat function is  
cancelled.  
4.) To cancel One Track Repeat, press the REPEAT button until the indicator no  
longer appears in the display.  
REPE AT 1  
One Disc Repeat  
1.) Press the REPEAT button until the "REPEAT 1 DISC" Indicator appears on  
the display. Press the DISC SKIP button to select the disc you wish to play.  
2.) Press the PLAY/PAUSE  
button. The selected disc will begin to play starting  
with Track 1. When the final track on the disc has been played, it will  
automatically begin playing again starting with Track 1.  
REPE AT 1  
DISC  
3.) To cancel One Disc Repeat playback, press the REPEAT button until the  
indicator no longer appears in the Display.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All Discs Repeat  
1.) Press the REPEAT button until the "REPEAT ALL DISC" Indicator appears in  
the Display.  
2.) Press the PLAY/PAUSE  
button, the changer will begin playing the first  
track of the disc which is in the play position. It will continue until it has played  
all tracks on all discs in the changer. When it has played the last track on the  
last disc it will begin playing again with the first track on the first disc. This All  
Discs Repeat will continue indefinitely.  
REPE AT  
ALL DISC  
3.) To cancel All Discs Repeat playback, press the REPEAT button until the  
Indicator no longer appears in the Display.  
Programmed Repeat Playback  
You can use the Program and Repeat features together to continuously repeat a  
programmed sequence of tracks. First, program the desired tracks according to  
Steps 1 through 7 in previous page. When Programmed Playback begins press  
the REPEAT button until the "REPEAT ALL DISC" Indicator appears in display. All  
the tracks in your programmed sequence will be repeated continuously.  
REPE AT  
ALL DISC  
To cancel Programmed Repeat Playback press the STOP button until both the  
PROGRAM and REPEAT Indicators go"Off".  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRO Scan On Front Panel Only  
The Intro Scan feature lets you hear a 10 second introduction of each track on  
each disc. This feature is useful if you are trying to find a particular song but you  
do not know the title.  
1.) Press the INTRO button once. The "INTRO" and "ALLDISC" Indicators appear  
in the display. The CD player will begin playing Track 1 of the disc in the play  
position. After 10 seconds it will advance to Track 2, and so on, until it has  
played the first 10 seconds of every track. Then it continues to next disc until  
all discs has been played.  
ALL DISC  
2.) To cancel Intro Scan and resume normal playback, press the INTRO button  
again. The INTRO Indicator disappears.  
NOTES:  
1. Because of non-standardized format definition/production of CD-R/RW,  
playback quality and performance are not guaranteed.  
2. Manufacturer is not responsible for playability of CD-R/RW due to recording  
conditions such as PC performance, writing software, media ability, etc.  
3. Do not attach a label or seal to either side of CD-R/RW disc. It may cause  
a malfunction.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNTABLE  
3
2
1
4
5
6
7
8
1.) 45 rpm LP Record Adapter.  
2.) Platter.  
3.) Transit Screw.  
4.) Tone Arm Clamp.  
5.) Tone Arm Lever (Cue Control).  
6.) 33/45/78 rpm Speed Slide Switch.  
7.) Tone Arm.  
8.) Stylus and Protective Cover.  
IMPOR TANT!!  
TO PROTECT THE TURN TABLE FROM DAMAGE DURING  
TRANSPORTATION, A SILVER TRANSIT SCREW IS LOCATED AT THE  
UPPER HAND CORNER OF THE TURNTABLE PLATFORM.  
BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE  
TRANSIT SCREW IN CLOCKWISE DIRECTION (SCREW GOING  
DOWN) COMPLETE LY TO UNLOCK THE TURNTABLE.  
TO LOCK THE TURNTABLE AGAIN FOR TRANSPORTATION, PLEASE  
TURN THE SCREW IN COUNTER-CLOCKWISE DIRECTION.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEREO PHONOGRAPH OPERATION  
1.) Raise the turntable dust cover.  
2.) Release the Tone Arm Clamp, and remove the stylus protector.  
3.) Slide FUNCTION selector to PHONO position.  
4.) Place a record on the turntable, over the central spindle.  
5.) Place the 45 rpm adapter over the central spindle when playing 45 rpm records.  
Set the Speed Selector Switch to 33, 45 or 78 rpm according to the record  
you are  
playing.  
6.) Move the Tonearm to the beginning of the record, or to the start of a particular  
track. Gently lower the Tonearm onto the record to start playing. Adjust the  
Volume and Equalizer setting as desired.  
7.) To pause during playback use the Cue Control lever to lift the Tone Arm from  
the record. To resume playback gently move the Cue Control forward to lower  
the Tone Arm back on to the record.  
8.) At the end of the record the Tone Arm will automatically return to its rest and  
the turntable stops, however the system power is still "On".  
9.) If you are finished playing records press the POWER  
button to shut the  
system Off , or use the FUNCTIONselector switch to select a different function.  
1.0.)Lock the Tone Arm Clamp.  
NOTE:  
1. Do not turn or stop the turntable manually. Moving or jarring the  
Turntable without securing the Tone Arm clamp could result in damage to  
the Tone Arm.  
2. Recommend you replace the stylus protector after finish listening each time.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASSETTE OPERATION  
PLAYING CASSETTE TAPES  
1.) Press the POWER  
button to turn the system "On".  
2.) Slide the FUNCTION selector to TAPE position to select the Tape mode.  
3.) Press the Stop/Eject  
open the cassette door.  
key of either deck A or deck B cassette control  
to  
4.) Insert a prerecorded cassette into the slots on the door with the exposed tape  
facing down and the full reel on the left side. Close cassette door.  
5.) Press the Play  
key to begin playback.  
6.) Adjust the VOLUME and EQ controls as desired.  
7.) When the tape ends the Automatic Stop System releases the Play  
key and  
shuts off the tape motor. Press the Stop/Eject  
door and remove your tape. To stop the tape before it ends press the Stop/  
Eject key at any time.  
key to open the cassette  
Fast Forward  
and Rewind  
Controls  
Press  
desired portion, or the end of the tape, press the Play  
playback, or press the Stop/Eject key to shut off the tape motor.  
Note: the Automatic Stop System does not function in the fast forward  
rewind modes.  
or  
key to advance or rewind the tape rapidly. When you reach the  
key to resume normal  
or  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pause  
Control  
Press the  
key to stop the tape temporarily. The tape movement stops but the  
tape motors continue to run. Press the  
resume normal playback.  
key again to cancel pause mode and  
CONTINUOUS PLAYBACK OF TWO CASSETTES  
1.) Insert prerecorded tapes into both cassette compartments with the tape you  
want to play first in DECK B.  
2.) Press the Play  
3.) Press Pause  
key of DECK B to begin playback.  
key and then Play key of DECK A.  
4.) When the tape in DECK B ends, it stops and the Pause  
be released automatically to begin playback on DECK A.  
key of DECK A will  
NOTE: Continuous playback no function if you play the tape in DECK A first.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAKING A TAPE RECORDING  
This cassette recorder features an Automatic Recording Volume Level Control  
System that prevents overloaded or distorted recordings. You can change the  
volume level as often as you like during the recording process. It will not have any  
effect on the volume level of the recording itself.  
1.) Insert a good quality blank tape into DECK A with the exposed tape facing  
down and the full reel on the left side. Close DECK A door.  
2.) Select the source you wish to record:  
PHONO, TUNER, CD or TAPE (Tape Dubbing) and operate that source as you  
normally would.  
3.) Press the Record  
key on DECK A to begin recording.  
NOTE: When recording from Cassette B to Cassette A you can press the HI-  
SPEED DUBBING button to "ON " to select high speed dubbing which allows  
you to make recordings at approximately twice the normal recording speed.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.  
2. Do not tamper the internal components of the unit.  
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.  
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.  
5. Keep your unit away from heating appliances and sources of electrical noise  
such as fluorescent lamps or motors.  
ABOUT CASSETTE TAPES  
Whenever you record on a cassette any previously recorded material is erased as  
the new material is recorded. To prevent you from accidentally erasing material  
which you wish to save, blank cassettes are equipped with erase prevention tabs  
for each side of the tape. If the erase prevention tab for side A is removed, you  
cannot accidentally record on side A. The Record  
key cannot be depressed if  
the erase prevention tab on the cassette has been removed.  
To prevent accidental erasing on side A of a cassette use a small screw driver or  
similar tool to break off the erase prevention tab for side A. This prevents the  
record key from locking.  
A
A
COVER OPENING WITH TAPE  
TAB FOR SIDE A.  
IN ORDER TO RECORD