Jensen MP3 Docking Station JIMS 260I User Manual

WALL MOUNTABLE DOCKING MUSIC  
SYSTEM WITH CD FOR iPod and iPhone  
USER MANUAL  
JiMS-260i  
(iPod/iPhone Not Included)  
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT  
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Expand Contents

IMPORTANT SAFETY INSTRUCTIONS  
When used in the directed manner, this unit has been designed and  
manufactured to ensure your personal safety. However, improper use can result  
in potential electrical shock or fire hazards. Please read all safety and operating  
instructions carefully before installation and use, and keep these instructions  
handy for future reference. Take special note of all warnings listed in these  
instructions and on the unit.  
1. Read these instructions – All the safety and operating instructions should be  
read before the appliance is operated.  
2. Keep these instructions – The safety and operating instructions should be kept  
for future reference.  
3. Heed all warnings – All warnings on the appliance and in the operating  
instructions should be adhered to.  
4. Follow all instructions – All operation and use instructions should be followed.  
5. Do not use this apparatus near water – The appliance should not be used near  
water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a  
wet basement, or near a swimming pool.  
6. Clean only with dry cloth – The appliance should be cleaned only as  
recommended by the manufacturer.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions. The appliance should be situated so that its  
location or position does not interfere with its proper ventilation. For example,  
the appliance should not be situated on a bed, sofa, rug, or similar surface that  
may block the ventilation openings; or placed in a built-in installation, such as  
a bookcase or cabinet that may impede the flow of air through the ventilation  
openings.  
8. Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
9. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
10.The system has as AC plug and will only fit into matching AC outlets. This is  
a safety feature to reduce the possibility of electric shock. If the plug will not  
fit in your AC outlets, you should have the outlet changed by qualified licensed  
electrician. Do not use an adaptor to make the plug fit into your outlet. This  
defeats the safety feature and could expose you to electric shock.  
11.Only use attachments / accessories specified by the manufacturer.  
12.Unplug this apparatus during lightning storms or when unused for long periods  
of time.  
13.Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
14.This appliance shall not be exposed to dripping or splashing water and that no  
object filled with liquids such as vases shall be placed on the apparatus.  
15.Power Sources – The appliance should be connected to a power supply only  
of the type described in the operating instructions or as marked on the  
appliance. Do not overload wall outlet.  
16.Danger of explosion if battery is incorrectly replaced. Replace only with the  
same or equivalent type.  
17.Do not attempt to dismantle, open or repair this product yourself. If a fault  
occurs, seek advice from your local qualified service technician or contact the  
distributor via the telephone number at the back of this instruction manual.  
18.Caution marking and nameplate are located on back of product.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
CLASS 1 LASER PRODUCT  
CAUTION  
CLASS 1 LASER PRODUCT  
APPAREIL LASER DE CLASSE 1  
PRODUCTO LASER DE CLASE 1  
INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS  
DEFEATED  
AVOID EXPOSURE TO BEAM.  
This product contains a low power laser device.  
Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.  
Follow the advice below for safe and appropriate operation.  
ON PROTECTION AGAINST LASER ENERGY EXPOSURE  
o
o
o
o
o
As the laser beam used in this compact disc player is harmful to the eyes, do  
not attempt to disassemble the casing.  
Stop operation immediately if any liquid or solid object should fall into the  
cabinet.  
Do not touch the lens or poke at it. If you do, you may damage the lens and  
the player may not operate properly.  
Do not put anything in the safety slot. If you do, the laser diode will be ON  
when the CD door is still open.  
This unit employs a laser. The use of controls or adjustment or performance of  
procedures other than those specified here may result in exposure to  
hazardous radiation.  
ON PLACEMENT  
Do not use the unit in places which are extremely hot, cold, dusty or humid.  
Place the unit on a flat and even surface.  
Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by  
covering it with a cloth or by placing it on a carpet.  
ON CONDENSATION  
When left in a heated room where it is warm and damp, water droplets or condensation  
may form inside the unit.  
When there is condensation inside the unit, the unit may not function normally. Let it  
stand for 1 to 2 hours before turning the power on, or gradually heat the room up and  
dry the unit before use.  
Should any trouble occur, remove the power source and refer servicing to qualified  
personnel.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTION FOR USE  
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.  
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE  
MAINS VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE.  
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE  
OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION.  
IMPORTANT NOTES  
Avoid installing the unit in locations described below:  
Places exposed to direct sunlight or close to heat radiating appliances such as  
electric heaters.  
Places subject to constant vibration.  
Dusty, humid or moist places.  
COMPLIANCE WITH FCC REGULATIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may  
cause undesired operation.  
NOTE : This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following  
measures:  
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
-
Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate the  
equipment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROTECT YOUR FURNITURE  
This model is equipped with non-skid rubber 'feet' to prevent the product from  
moving when you operate the controls. These 'feet' are made from non-migrating  
rubber material specially formulated to avoid leaving any marks or stains on your  
furniture. However certain types of oil based furniture polishes, wood  
preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave  
marks or a rubber residue on the furniture. To prevent any damage to your  
furniture we strongly recommend that you purchase small self-adhesive felt pads,  
available at hardware stores and home improvement centers everywhere, and  
apply these pads to the bottom of the rubber 'feet' before you place the product on  
fine wooden furniture.  
PRODUCT FEATURES  
The JiMS-260i is an iPod/iPhone Docking Music System with incorporates the  
following features:  
Player / Charger for iPod nano, iPod touch, iPod classic, iPod video and  
iPhone.  
Audio CD player with CD and CD-R/RW compatibility  
CD Playback modes :  
-
Repeat one / Repeat All  
-
Program playback up to 20 tracks  
FM digital tuner with 10 presets  
Auxiliary input jack  
Pre-set EQ control (Rock, Classic, Jazz & Pop)  
Digital volume control  
Sleep timer function  
Wake Timer function - Wake to radio, CD or your iPod/iPhone  
Video Line-out provides video signal output when iPod/iPhone with video is  
docked  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
FOR TABLE TOP USE  
Attach the stand to the main unit as shown in figure 1a below. Attach the stands to the  
speakers as shown in figure 1b below.  
Fig. 1a  
Fig.1b  
FOR WALL MOUNTING  
1) Detach the stands from both  
speakers and from the main unit.  
2) Use the supplied wall-mounting  
template to make anchor hole  
marks on the wall. Make sure the  
marks are level before drilling.  
3) Drill 1/4” holes on the marks.  
4) Insert the included plastic  
anchors into the holes and push  
in until they are flush with the  
wall.  
5) Insert the included screws into the anchors and tighten until the screw head is about  
1/4” away from the wall. Line up the slots located on the back of the main unit and  
speakers with the screws in the wall. See illustration below.  
NOTE: This unit is not magnetically shielded and may cause color distortion on the  
screen of some TVs or video monitors. To avoid this, you may need to move the unit  
further away from the TV or monitor if unnatural color shifts or image distortion occurs.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
Main Unit  
17  
16  
15  
1
2
3
14  
13  
4
5
12  
11  
10  
9
6
7
8
1. Function Selection Button  
2. Volume+ Button  
3. Volume- Button  
4. Power On/Standby  
Button  
5. Left Speaker  
6. CD Door  
7. Sleep Button  
8. Timer Button  
9. CD Program; FM Station Memory Set; Clock Adjust Button  
10. CD/iPod Play Mode Selection; FM Memory Down  
11. Remote Infrared Sensor  
12. Right Speaker  
13. Play/Pause  
Button; FM Memory Up Button  
14. CD Stop  
Button ; FM Stereo/Mono selection  
15. CD/iPod Skip Search Forward  
adjust up  
Button; FM Radio Tuning+ ; Clock/Timer  
16. CD/iPod Skip/Search Backward  
adjust down  
Button; FM Radio Tuning- ; Clock/Timer  
17. CD door Open  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1
18  
17  
2
3
16  
15  
14  
4
5
6
13  
12  
11  
7
8
9
10  
1. Infra-red Transmitter  
2. Power On/Standby  
Button  
3. Function Selection Button  
4. iPod Menu Button  
5. CD/iPod Skip/Search Backward  
adjust down  
Button; FM Radio Tuning- ; Clock/Timer  
6. iPod Enter Button  
7. Timer Button  
8. Sleep Button  
9. CD Program; FM Station Memory Set; Clock adjust Button  
10. Battery Compartment  
11. Volume+/- Buttons  
12. CD/iPod Skip Search Forward  
adjust up  
Button; FM Radio Tuning+ ; Clock/Timer  
13. iPod Menu Scroll Up/Down Button  
14. CD Stop Button; FM Stereo/Mono selection  
15. Play/Pause  
16. Mute Button  
Button; FM Memory Up Button  
17. CD/iPod Play Mode Selection; FM Memory Down Button  
18. EQ mode selection Button  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING STARTED  
SPEAKER CONNECTION  
Unpack the unit carefully. The speaker wires are already attached to main unit.  
Handle with care to avoid damaging the wires. Place the left speaker on the left side  
of the main unit and place the right speaker on the right side of the main unit.  
ANTENNA CONNECTION  
FM: Untie and fully extend the FM Antenna wire for best reception.  
POWER SUPPLY  
This Music System operates on 120V AC~ 60Hz household power.  
The remote control unit operates on one “CR2025” lithium battery (Included).  
AC POWER CONNECTION  
Connect the power cord to a 120V AC~ 60Hz power outlet.  
Remarks:  
In case of malfunction due to electrostatic discharge (ESD), reset the unit by  
disconnecting and reconnecting the AC CORD to reset and to resume normal operation.  
CONNECTING THE AC POWER  
An AC-DC Adaptor with 10V DC 2000mA output (included) is required for  
operating the main unit. Connect the AC-DC Adaptor to the unit and an AC outlet:  
1.) Firmly and securely insert the DC plug of the adaptor into the DC Jack on the  
unit  
2.) Plug the Adaptor plug into a power outlet rated at 120V AC~ 60Hz.  
Remote Control  
The remote control operates on one CR2025 battery (included). To activate the  
remote control, remove the insulation tab inserted in the battery compartment.  
When the operation of the remote control becomes  
intermittent or unsatisfactory, replace the original battery with  
a new 3-volt lithium battery.  
1.) Slide out the battery holder from the remote control case.  
2.) Replace the 3V CR2025 battery. Be sure the battery is  
installed correctly. The remote will not work if the battery is  
installed with the wrong polarity.  
CAUTION: Danger of explosion if the battery is replaced  
incorrectly. Replace only with the same type  
battery.  
3.) Insert the battery holder back into the battery slot.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Only use a well-known brand of cell battery to ensure the longest life and  
best performance.  
BATTERY CARE  
i.  
If the unit is not used for an extended period of time, remove the battery. An old  
or leaking battery can cause damage to the unit and may void the warranty.  
Do not dispose batteries in fire. Batteries may leak or explode.  
ii.  
iii. Do not try to recharge batteries that are not intended to be recharged; they can  
overheat, rupture and leak (Follow battery manufacturer’s directions).  
iv. Only an adult should replace the battery.  
CLOCK SETTING  
NOTE:  
i. The clock has to be set the first time you plug the unit in.  
ii. The Clock is set to default in 12 Hour mode.  
With the unit in standby mode (power OFF):  
Setting 12/24 Hour format  
1.) Press and hold the CLOCK ADJUST (CLK. ADJ) button until 12H or 24H  
appears flashing on the display. Press the  
between 12 hour (12H) or 24 hour (24H) format.  
or  
buttons to switch  
2.) Press the CLK.ADJ button to confirm, the Hour digit(s) will flash to prompt for  
input.  
Setting the Clock  
3.) To set the hour, repeatedly press the  
or  
buttons to select the correct  
hour digit(s). Press and hold the buttons to speed the forward or reverse  
scanning of the digits.  
NOTE: Make sure the hour is set so that AM or PM is displayed correctly.  
4.) Press the CLK.ADJ button to confirm the hour setting and the minute digits  
flash to prompt for input.  
5.) To set the minutes, repeatedly press the  
or  
buttons to select the  
correct minute digits. Press and hold the buttons to speed the forward or  
reverse scanning of the digits.  
6.) Press the CLK.ADJ button again to complete the clock setting.  
RADIO OPERATIONS  
Tuning the Radio  
1.) Press the POWER ON/STANDBY  
button located on top of the main unit or  
on the remote control to turn on the unit. Press the FUNCTION button  
repeatedly to select the FM mode.  
2.) Repeatedly press the  
station.  
or  
buttons to manually tune to a desired  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.) To automatically search for stations with strong signals, press and hold either  
the or button until the frequency read out on display begins to scan  
then release the button. The tuner will stop on the first strong station signal it  
finds.  
4.) Adjust the sound level by pressing the VOLUME + / - buttons.  
5.) Press the TIMER button to show the current time on the display. The time will  
revert back to the station frequency readout after 5 seconds.  
Notes:  
Manual tune to select weaker stations that might be bypassed during  
automatic tuning.  
If the automatic tuning does not stop on the exact frequency of the station, for  
example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual tuning  
method to "fine tune" to the exact frequency of the desired station.  
If a station is broadcasting in Stereo, the unit will automatically receive the  
stereo broadcast.  
Hints for the Best Reception  
To obtain the best FM/FM Stereo reception, unwrap and fully extend the FM  
Antenna and adjust the position of the wire for best station reception.  
Setting the Radio Station Presets  
The unit allows you to store up to 10 FM stations for easy recall at any time.  
1.) In the FM mode, tune to the radio station you want to store in memory using  
the  
or  
buttons.  
2.) Press the MEM button. The preset channel number "P01" will be flashing on  
display.  
3.) To change the preset channel number location, press the MEM-UP or  
MEM-DOWN buttons to step through the preset locations (P01 – P10).  
4.) To confirm the preset location, press the MEM button.  
5.) To store up to 10 FM station presets, repeat steps 1 to 4 above.  
Note:  
1. There is a 5 seconds delay when programming, after 5 seconds, the unit will  
automatically switch back to normal tuner mode.  
2. You can overwrite a present station by overwriting and storing the new  
frequency in its place.  
Recall Preset Radio Stations  
1.) Set the unit to FM mode.  
2.) Press the MEM-UP or MEM-DOWN button to select preset channel.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTENING TO iPod/iPhone  
CONNECTING  
If the docking port will not be used for an extended period of time, it is  
recommended to cover the docking port by using the “Dock Cover (included)”.  
1.) Use the iPod adapter included with your iPod and insert it into the docking  
area. No Adaptor is required if you use an iPhone. Your iPod / iPhone can now  
be inserted into the docking port by placing the connector on the bottom of the  
iPod onto the connector in the docking bay.  
Note: Please be careful when placing the iPod / iPhone into the docking bay to  
avoid damaging the 30-pin connector on the iPod/iPhone or on the  
docking system.  
2.) Press the POWER ON/STANDBY button to turn on the unit.  
3.) Press the FUNCTION button repeatedly to select iPod mode. The iPod/iPhone  
will start playing and charging automatically. You can also play the  
iPod/iPhone by pressing iPod/iPhone PLAY/PAUSE  
is at another mode.  
button when the unit  
4.) Press the iPod/iPhone PLAY/PAUSE  
playback.  
5.) Adjust the sound level by pressing the VOLUME  
button to pause or resume iPod  
buttons.  
/
6). Repeatedly press the EQ button on the remote to change the EQ setting.  
There are four different EQ settings available to enhance the playback sound  
(ROCK/CLASSICAL/JAZZ/POP).  
Note: The volume level cannot be adjusted using the volume control on your  
iPod/iPhone after being docked.  
7.) The iPod/iPhone charges in all modes even during playback.  
iPod/iPhone playback control:  
Press the iPod/iPhone PLAY/PAUSE  
iPod/iPhone playback;  
button to pause or resume the  
Press the SKIP  
Press and hold the SKIP  
fast-rewinding during playback.  
or  
buttons to skip to the next or previous song;  
or buttons for fast-forwarding or  
From the remote, press the MENU button, ENTER button and  
on the remote control to control the iPod menu, scroll menu up/down and  
enter selection.  
/
buttons  
Press the PLAY MODE button on the remote to repeat one or repeat all song  
/ file playback.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO OUT FROM THE iPod/iPhone  
1. You can connect this unit to a television or other video display that has a  
composite video input.  
2. Securely dock your iPhone or iPod with video.  
3. Connect one end of an RCA cable (not included) to rear RCA video jack on the  
unit.  
4. Connect the other end of the RCA cable to VIDEO IN of television or video  
display.  
5. Press the FUNCTION button to select iPod/iPhone mode.  
6. Select a movie from your iPod/iPhone menu.  
7. iPod: On the main menu choose video then select video setting.  
8. iPod: Make sure the TV Out section is set to "ON".  
9. iPod: Switch back to the movie library and play the movie of your choice.  
Note: Video out will be automatic when using an iPod touch or iPhone.  
CD OPERATIONS  
NOTE: This player will not only play commercial CDs, but also self-complied CD-D/RW  
discs. Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.  
Notes on CD-R/RW Discs  
Because of non-standardized format definition/production of CD-R/RW CD,  
playback quality & performance are not guaranteed.  
Manufacturer is not responsible for the playability of CD-R/RW CD due to recording  
conditions such as PC performance, writing software, media ability, etc.  
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a  
malfunction.  
Do not load a blank CD-R/ RW disc. It will take over 30 seconds to read the  
disc. The disc may be damaged if you try to open the CD Door while reading  
the disc.  
The following procedures can be accomplished by using the remote or controls on the  
unit.  
Loading The Discs  
1. Press the POWER ON/STANDBY  
button to turn the unit on.  
2. Press the FUNCTION button to select the CD mode.  
3. Press the OPEN button on the top panel to open the CD door, the icon “OPEN”  
shows on the display;  
4. Hold the CD by the edges with CD graphic side facing front and insert it into  
the CD try. Make sure the disc label is facing you.  
5. Press the CLOSE mark position on the CD door to close the CD door.  
6. When the disc is loading, “ - - - - ” will appear and flashing on the display.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Normal Playback  
After loading the disc, the disc will begin spinning and the total number of the  
tracks on the disc will be shown on the display for a while. Then the CD Player will  
automatically play the CD start from the first track and the display will show the  
playback time of the current track.  
NOTE: If there is no disc in the unit or the loaded disc is not recognized by this  
player, “no cd” will be shown on the display.  
Play/Pause Control  
To pause temporarily during the CD playback, press the  
button. The disc will  
pause and the current playing track number will show on the display and flashing.  
Press the  
button again to resume playback.  
Stop Control  
To stop the CD playback, press the  
button on the unit or on the remote control.  
The CD will stop playback and the whole tracks of the disc will indicate on the  
display.  
Skip/Search Track  
During playback, press the  
tracks.  
or  
button to skip to the next or previous  
or button to search forwards or  
During playback, press and hold the  
backwards through the current track. When the desired part of the track is  
reached, release the button and playback will resume.  
To Check the Actual Time:  
In CD mode, press the TIMER button once to check the actual time. The clock will  
display for 5 seconds and then go back CD track / play time mode a few seconds.  
Play Mode Control  
Repeat the Current Track  
In CD playback mode, select the track to be repeated and begin playback.  
Tap the PLAY MODE button once. The “RPT” icon will appear and flash on  
the display. The selected track will be repeated playback continuously.  
Repeat All Track  
Tap the PLAY MODE button twice. The “RPT” icon will be shown on the  
display steadily and all tracks on the disc will be repeated playback  
continuously.  
Tap the PLAY MODE button again to cancel repeat playback function, and  
normal playback will resume. The “RPT” will be disappeared on the display.  
RANDOM Playback  
The Random playback feature allows you to play all the tracks on the current  
disc in a random order. This function can be selected when the disc is playing  
or in stop mode. Press and hold the PLAY MODE button to enter random  
playback mode. The “RDM” will be indicated on the display.  
Press and hold the PLAY MODE button to cancel the random play mode and  
resume to normal playback.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmed CD Playback  
The CD player can be programmed to play any sequence of up to 20 tracks. In  
CD mode,  
1. Load a compact disc into the CD compartment.  
2. After load the disc, press the STOP button before starting the programming.  
3. Press PROG button, “MEM” “01:--“ indicates and flashes on the display for 30  
seconds.  
4. Press the  
or  
button to select the desired track to be programmed.  
5. Press PROG button again to save the selected track. The programmed track  
number “02 --” indicates on the display.  
or  
6. Press the  
button to select the next desired track to be  
programmed.  
7. Press the PROG button to save the selected track.  
8. Repeat steps 6-7 to program up to 20 tracks.  
9. Press the  
button to play according to the programmed track when  
programming is completed.  
Clear Program (Resume Normal Playback)  
Press STOP button twice in the program mode, or release the CD door, or change  
to another mode to clear the programmed tracks.  
SLEEP TIMER  
The sleep timer allows you to turn the unit off after a designated time is reached.  
1.) To activate the sleep timer, turn the unit on and either load a CD, dock your  
iPod/iPhone or tune to the desired radio station.  
2.) Tap the SLEEP button and the SLEEP icon appears on the display.  
3). Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off  
after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes. Wait 5 seconds after your  
selection for the unit to confirm the selection, the unit will play for the selected  
length of time then automatically turn off.  
4.) To cancel the sleep timer, press the SLEEP buttons until timer shows “OFF”,  
the “SLEEP” indicator will disappear from the display after 5 seconds.  
5.) To turn the unit off before the selected length of time, press the POWER  
button at any time.  
WAKE TIMER OPERATIONS  
Setting the wake timer  
When the unit is in standby mode,  
1.) Press and hold the TIMER button until TIMER icon appears and the hour  
digit(s) flashes.  
2.) Press the  
or  
buttons to set the hour.  
3). Press the TIMER button to confirm, the minute digits flash to prompt for input.  
4). Press the  
or  
buttons to set the minutes.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5). Press the TIMER button to confirm, wake up source flashing. Press the  
or  
button to select a source you want to wake to.  
6). Press the TIMER button to confirm, Press the  
wake volume level.  
or  
buttons to set the  
7). Press TIMER button to confirm,  
Note: When “Wake to Radio” is selected, make sure the radio station you want to  
wake to is tuned. If “Wake to iPod” or “Wake to CD” is selected but an iPod  
/ iPhone is not docked or CD is not loaded, the alarm source will be  
redirected to the radio automatically when the wake time is reached.  
8.) If you want to switch off the wake timer, tap the TIMER button and the TIMER  
icon disappears from the display.  
9.) When the wake time is reached, the selected source, radio, CD or iPod/iPhone  
will begin to play. The wake timer continues to sound for 60 minutes if no  
button is pressed and the unit will reset itself for the following day.  
10.) To stop the wake timer after the preset time is reached and the source begins  
to play, press either the POWER button or the TIMER button once.  
PRESET EQ (REMOTE CONTROL ONLY)  
This unit provides 4 different EQ modes to enhance your listening experience.  
You can select the desired effect by pressing the “EQ” button on remote control  
repeatedly at following sequence:  
Off  
ROCK  
CLASSIC  
JAZZ  
POP  
Mute Button (By Remote Control)  
- Press the MUTE button on remote control to mute the sound output from  
speaker temporarily, MUTE icon will appear on display and flashing.  
- Press the MUTE button again to resume to normal speaker playback.  
AUXILIARY INPUT  
This unit provides an auxiliary audio signal input jack for connecting external  
audio devices like MP3 players, CD players and older, non-dockable iPods  
(except iPod shuffle 3rd gen) and listen to your external source through the  
speakers of this system.  
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of  
the cable.  
2. Plug one end into the Aux-in jack on the main unit and the other end of the  
cable into the Line-out Jack or Headphone Jack of your external audio device.  
3. Turn on the external audio device.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. To select auxiliary audio input, press the FUNCTION button to select “AUX”  
mode.  
5. The volume level can now be controlled through the main unit. Operate all other  
functions on the auxiliary device as usual.  
Note:  
(1) If the Line Out Jack of your external device is connected, then you only need  
to adjust the volume control of this system. If the Headphone Jack of your  
external device is connected, then you may need to adjust both the volume  
control of your external device and the volume control of this system to find the  
most desirable volume setting.  
(2) Press the POWER  
button to turn off the system when you finish listening.  
Don't forget to switch off the power on your external device as well.  
RESETTING  
If the system does not respond or has erratic operation, you may have  
experienced an electrostatic discharge (ESD) or a power surge that triggered the  
internal computer to shut down automatically. If this occurs, simply disconnect the  
main power, wait one minute and reconnect the main power again.  
Note:  
Disconnecting the power will reset the internal computer after a power surge, but  
it will also erase all of the settings. After turning “ON” the unit, you will need to  
reset the settings again.  
CARE AND MAINTENANCE  
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.  
2. Keep your unit away from heating appliances and sources of electrical noise such as  
fluorescent lamps or motors.  
3. For better Clock Display clarity, avoid operating the unit under direct sunlight or in  
strong room illumination.  
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.  
COMPACT DISC CARE  
Handle the disc only by its edges. Never allow your fingers to come in contact with  
the shiny, unprinted side of the disc.  
Do not attach adhesive tape, stickers etc., to the disc label.  
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or  
adhesive cleaners to clean the disc. If necessary, use a CD cleaning kit.  
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged  
(scratched).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When cleaning the disc, wipe in straight lines from the center of the disc to the edge  
of the disc. Never wipe in circular motions.  
To remove a disc from its storage case, press down on the center of the case and lift  
the disc outs, holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a  
soft cloth. Unlike conventional records. compact discs have no grooves to collect  
dust and microscopic debris so gently wiping with a soft cloth should remove most  
particles.  
CLEANING THE UNIT  
To prevent fire or shock hazard, disconnect your unit from the AC power source when  
cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other  
furniture, Use caution when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or  
polish sprays on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a  
soft cloth slightly dampened with a mild soap and water solution. Never use abrasive  
cloths or polishes as these will damage the finish of your unit.  
CAUTION: Never allow any water or other liquids to get inside the unit while  
cleaning.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
Symptom  
Possible Problem  
Solution  
AC Adaptor is not plugged  
into a wall outlet or the  
connector is not plugged into  
the power supply jack on the  
back of the unit.  
Plug the AC adaptor into a wall outlet and plug the  
connector into the supply jack on the unit.  
The unit does not  
respond (no  
power).  
Plug another device into the same outlet to confirm  
the outlet is working.  
Wall outlet is not functioning.  
Using no/wrong iPod  
Adaptor.  
Make sure the dock insert is the proper fit for your  
iPod.  
Remove your iPod from the dock and check for  
obstruction on the connectors in the dock and on  
your iPod. Then reseat it in the dock.  
iPod does not  
dock properly.  
iPod does not install  
properly.  
Remove your iPod/iPhone from the dock and check  
for obstruction on the connectors in the dock and  
on your iPod/iPhone. Then reseat it on the dock.  
Please make sure that your iPod/iPhone is working  
properly before docking into the unit. Please refer  
to your iPod/iPhone manual for info on resetting the  
iPod/iPhone.  
iPod/iPhone is not installed  
properly.  
iPod/iPhone does  
not respond to the  
speaker system.  
Your iPod/iPhone is locked  
up.  
Unit turned to CD or radio  
mode.  
Select other modes for iPod charging.  
Remove your iPod/iPhone from the dock and check  
for obstruction on the connectors in the dock and  
on your iPod/iPhone. Then reseat it in the dock.  
Please make sure your iPod/iPhone is working  
properly before docking into the unit. Please refer  
to your iPod/iPhone manual for details on resetting.  
iPod/iPhone is not installed  
properly.  
iPod/iPhone does  
not charge.  
iPod/iPhone is locked up/  
frozen. iPod/iPhone battery  
has problem.  
You have tuned to a mono  
station or the station is too  
weak.  
Select another FM station or extend or  
rotate the wire antenna for best reception.  
FM STEREO  
indicator does not  
light up  
FM MONO MODE is set.  
Set the FM MODE to STEREO.  
Volume level is set too high.  
Decrease the volume.  
If the iPod/iPhone original sound source is of poor  
quality, distortion and noise are easily noticed with  
high-power speakers. Try a different audio source  
such as a music CD.  
If you are using an external sound source like older  
generation of iPod, try reducing the output volume  
on the device itself. Also try turning bass boost  
OFF or change the EQ setting.  
Sound is distorted.  
Sound source is distorted.  
CD mode is not selected.  
CD is not installed or  
installed incorrectly.  
Press the FUNCTION switch to select CD mode.  
CD Player does  
not play.  
Press the CD onto spindle, printed side facing up.  
CD skips while  
playing.  
Disc is dirty or scratched.  
Wipe with cloth or use another disc.  
Unit gets warm  
after extended  
play at high  
volume.  
Turn the unit off for a period of time or lower  
volume.  
This is normal.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Power Requirement  
Main Unit  
AC-DC adaptor  
Input: AC 120V~ 60Hz  
Output: DC10V / 2000mA  
1 x 3V CR2025 Lithium Battery  
Remote Control  
Frequency Range  
Radio  
FM 87.5 - 108 MHz, 0.1 MHz tuning step  
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has  
been designed to connect specifically to iPod and iPhone, respectively, and has  
been certified by the developer to meet Apple performance standards. Apple is  
not responsible for the operation of this device or its compliance with safety and  
regulatory standards.  
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are  
trademarks of Apple Inc., registered in the U.S. and other countries.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90 DAY LIMITED WARRANTY AND SERVICE  
VALID IN THE U.S.A ONLY  
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective  
materials or factory workmanship for a period of 90 days from the date of original customer  
purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or  
transferable. Our obligation under this warranty is the repair or replacement of the defective unit  
or any part thereof, except batteries, when it is returned to the SPECTRA Service Department,  
accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a  
sales receipt.  
You must pay all shipping charges required to ship the product to SPECTRA for warranty service.  
If the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s  
expense. There are no other express warranties other than those stated herein.  
This warranty is valid only in accordance with the conditions set forth below:  
1. The warranty applies to the SPECTRA product only while:  
a. It remains in the possession of the original purchaser and proof of purchase is  
demonstrated.  
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the  
descriptions and warnings covered within the user manual or non-SPECTRA approved  
modifications.  
c. Claims are made within the warranty period.  
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in  
compliance with electrical codes or SPECTRA user manual specifications, or failure to provide  
reasonable care and necessary maintenance as outlined in the user manual.  
3. Warranty of all SPECTRA products applies to residential use only and is void when products are  
used in a nonresidential environment or installed outside the United States.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully  
and send it freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED  
WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase (dated cash  
register receipt) so that we may establish your eligibility for warranty service and repair of the unit  
without cost. Also include a note with a description explaining how the unit is defective. A customer  
service representative may need to contact you regarding the status of your repair, so please  
include your name, address, phone number and email address to expedite the process.  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $50.00 to cover  
the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.  
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email  
at [email protected] for updated information on the unit requiring service. In some cases  
the model you have may be discontinued, and SPECTRA reserves the right to offer alternative  
options for repair or replacement.  
SPECTRA MERCHANDISING INTERNATIONAL, INC.  
4230 North Normandy Avenue,  
Chicago, IL60634, USA.  
1-800-777-5331  
To register your product, visit the link on the website below to enter your information.  
Printed in China  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jensen Car Stereo System AWM970 User Manual
Jensen Car Stereo System CD510K User Manual
Jensen Car Stereo System MP1311 User Manual
Jensen GPS Receiver VM9022 User Manual
Jensen MP3 Docking Station JiMS 100 User Manual