Jensen Flat Panel Television VM9412 User Manual

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to

use all the features of your new Jensen VM9412 Mobile Multimedia Receiver for maximum

enjoyment.

Preparation............................................................................................................................ 1

Installation............................................................................................................................. 5

Anti-Theft Feature ................................................................................................................. 6

Controls and Indicators ......................................................................................................... 7

Remote Control..................................................................................................................... 9

Using the TFT Monitor ........................................................................................................ 12

Operating Instructions......................................................................................................... 14

Multi-ZONE Operation......................................................................................................... 15

Setup Menu......................................................................................................................... 16

Tuner Operation.................................................................................................................. 18

Satellite Radio Operation .................................................................................................... 20

DVD/VCD Video Operation................................................................................................. 22

DVD/CD Audio Operation ................................................................................................... 25

MP3/WMA/iPod Operation.................................................................................................. 26

Troubleshooting .................................................................................................................. 29

Specifications...................................................................................................................... 32

i

Download from Www.Somanuals.com. All Manuals Search And Download.

ii

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

PREPARATION

Congratulations on your purchase of the Jensen VM9412

Mobile Multimedia Receiver.

•

RCA Audio/Video Input

Chassis

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Jensen VM9412

installed by a reputable installation shop.

•

1.0 DIN (Import/ISO-DIN Mountable)

Motorized/Swivel Flip-Out/Flip-Up LCD Screen

7" TFT Active Matrix LCD with Anti-Glare Coating

Screen Tilt/Angle Adjustment

Heat Management System - Forced-Air Cooling to Keep

the Chip-Sets Operating at Nominal Temperatures

Features

DVD

•

Aspect Ratio - Full, Normal and OFF

Fast Forward - 2X, 4X, 8X and 32X

Slow Motion - 1/2, 1/4, 1/6 and 1/7

Play, Pause, Stop, Next Chapter and Previous Chapter

ESP - 2MB Buffer

General

•

Navigation Ready (NAV101 Only)

38-Key Infrared Remote Control with 5-Way Joystick

Two Composite Video Outputs for Additional Screens

Compatible with MZ7TFT Rear Seat Monitors with

Touch Screen Interface

CD / MP3 / WMA

•

ID3 Tag Compatible

Directory Search

•

Two Audio/Video Auxiliary Inputs

100-Ohm Preamp Line Output - All Audio Channels

4VRMS Line Output - All Channels

Rotary Encoder Audio Control

Seven-Band EQ with Eight Preset EQ Curves

Spectrum Analyzer

Front, Rear, Center and Subwoofer Line Output

Subwoofer Crossover and Phase Control

Dolby Digital/Pro-Logic ll

Direct Track Access via Remote control

Burn Up To 1500 MP3 / WMA Files onto a DVD+R/RW

Audible Forward / Reverse Track Search

Random, Repeat and Intro

Play, Pause, Stop, Next Track and Previous Track

ESP - 2MB Buffer

AM-FM

Programmable Volume Control

Rear Camera Input (Normal and Mirror Image View)

Auto TFT Dimmer

•

USA/Europe/Latin America/Asia Frequency Spacing

30 Station Presets (18 FM, 12 AM)

Auto Stereo/Mono

Local/Distance

Auto Store/Preview Scan

RDS (Radio Data System)

5-Way Joystick

Optional Accessories

•

jLinkCable - iPod interface Cable

Sat Radio Ready

•

Compatible with XM and Sirius Tuners (Sold Separately)

Requires XMDJEN100 or JXMC Cables (Sold

Separately)

•

Satellite Channel Name, Artist, Song and Categories

Displayed on TFT Screen

iPod

•

jLinkDirect - High Speed Direct Connect Interface to

Access iPod Playlists, Artists, Albums, Songs, **Photos

and **Video (** Requires Photo or Video iPod)

Power Management Charges iPod while Connected

Requires jLinkCable (Sold Separately)

•

MediaLink³

•

Under Dash Interface Allows Portable Media Devices to

be Connected

•

MediaLink³Includes the following connectivity:

•

jLinkDirect 8-pin DIN for iPod

3.5mm Audio Only Input

1

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Optional Equipment

Tools and Supplies

You will need these tools and supplies to install your

VM9412:

WARNING! Only connect the unit to a12-volt power

•

NAV101

supply with proper grounding.

The VM9412 is "navigation ready." Before accessing

any navigation features, you must purchase and install

the NAV101 module. All installation and operating

instructions will be included with the NAV101 navigation

module.

•

Torx type, flat-head and Philips screwdrivers

Wire cutters and strippers

Tools to remove existing radio (screwdriver, socket

wrench set or other tools)

Electrical tape

Crimping tool

Volt meter/test light

Crimp connections

18 gauge wire for power connections

16 – 18 gauge speaker wire

WARNING! Never install this unit where operation and

viewing could interfere with safe driving conditions.

Once the NAV101 is connected and operating properly,

the NAV source mode will become active. While the

NAV101 is not installed, the NAV option appears gray,

indicating the function is not available.

Rear Camera

•

WARNING! To reduce the risk of a traffic accident (except

when using for rear view video camera) never use the

video display function while driving the vehicle. This is a

violation of federal law.

•

The VM9412 is "camera ready." Before accessing any

camera features, you must purchase and install a rear

video camera. Once the rear camera is connected and

operating properly, the CAMERA source mode will

become active. While the camera is not installed, the

CAMERA option appears gray, indicating the function is

not available.

WARNING! Never disassemble or adjust the unit.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and

remove the negative (-) battery cable prior to installation.

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

NOTE: If the VM9412 is to be installed in a car equipped

with an on-board drive or navigation computer, do not

disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under

these conditions, use extra caution during installation to

avoid causing a short circuit.

•

Satellite Radio Tuner

See “Satellite Radio Operation” on page 20.

iPod

WARNING! Never use irregular discs.

See “MP3/WMA/iPod Operation” on page 26.

WARNING! To prevent damage to the mechanism inside

this unit, avoid impact to the TFT monitor.

Optional Accessories

•

jLinkCable - iPod interface Cable

WARNING! Using an improper fuse may cause damage

to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized

mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually,

other than in the manner explained in “Monitor Left/Right

Angle Adjustment” on page 12.

2

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

WIRING DIAGRAM

MediaLink

Bus

See the MediaLink and Satellite Connections diagram for more information

about connecting a satellite receiver and an iPod (through the MediaLink).

*

SAT Radio

SAT L

* Satellite

Receiver

Connections

WHITE

RED

BLUE

SUB.W

RED

External Power Amplifier

SAT R

FRONT R

WHITE

FRONT L

RED

YELLOW

WHITE

RED

WHITE

RED

REAR R

WHITE

REAR L

*MediaLink

YELLOW

External AV System

WHITE

RED

WHITE

RED

Antenna Jack

YELLOW

Rear Video 1

Rear Video 2

VIDEO OUT 1

NAV101 Input

YELLOW

BLACK

Antenna

Harness Cord

VIDEO OUT 2

MZ-TFT Touch Screen

(Sold Separately)

Auto antenna control (connect to antenna

control lead & power supply of antenna

amplifier)

BLUE

MZ-TFT

ANT.CONT

WHITE

RED

External power amplifier control

BLUE/WHITE

WIRELESS HEADPHONE

(OPTIONAL)

P.CONT

Car Phone

Rear View

YELLOW Video Camera

Mute (leave open if not connected)

BROWN

YELLOW

Car

MUTE

CAMERA

PRK SW

PARKING BRAKE

PINK

WHITE +

FRONT L+

WHITE/BLACK -

FRONT L

+

REVERSE

FRONT L-

GREEN/WHITE

REVERSE +

GREY +

FRONT R+

FRONT R-

RED

GREY/BLACK -

FRONT R

REAR R

REAR L

ACC

Ignition Switch

ACC

PURPLE +

REAR R+

REAR R-

BATTERY +

PURPLE/BLACK -

YELLOW

BATT

FUSE (15A)

BATTERY

GREEN +

REAR L+

REAR L-

GREEN/BLACK -

BLACK

GND

Ground

Battery

3

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

MEDIALINK AND SATELLITE CONNECTIONS

SAT Radio

SAT L

SAT R

*SAT Cable Kit: JXMC or XMDJEN100 (sold separately)

**XM or Sirius satellite tuner (sold separately)

MediaLink

3.5mm - Audio

VIDEO

LEFT

RIGHT

* *

*

iPod Video

iPod

iPod Mini iPod Nano

jLink iPod Cable

(Sold Separately)

4

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the half-

FINAL INSTALLATION

CAUTION! Be careful not to damage the car wiring.

sleeve from the radio.

4

5

3. Place the radio in front of the dashboard opening so the

wiring can be brought through the mounting sleeve.

PREPARE RADIO

1

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the

ACC lead to the power supply with a switch.

BA

ND

AS

2

Pr

es

s

Au

di

o

VM

9412

SR

C

RE

AR

DISP

OP

EN

RP

T

SC

N

P

TY

RD

BA

ND

En

te

NOTE: When replacing a fuse, be sure to use correct

type and amperage to avoid damaging the radio. The

VM9412 uses one 10 amp mini-ATM fuse, located in the

black filter box in-line with the main wire harness.

M

r

A

ST

OP

S

M

U

T

E

Pr

e

s

Au

d

io

VM9412

SR

C

RE

AR

DISP

OP

EN

RP

T

3

SC

N

P

TY

RD

E

n

M

te

r

ST

OP

M

U

T

E

Final Installation

Final ISO-DIN Installation

1. Remove trim ring.

After completing the wiring connections, turn the unit on to

confirm operation (ignition switch must be on). If unit does not

operate, recheck all wiring until problem is corrected. Once

proper operation is achieved, turn off the ignition switch and

proceed with final mounting of the chassis.

2. Install the half-sleeve.

a. Install adapter if necessary (optional).

2. Mount factory brackets on new radio using existing

screws from old radio.

b. Install half-sleeve into adapter or dashboard (use

only the supplied screws). Do not force the sleeve

into the opening or cause it to bend or bow.

c. Locate the series of bend-tabs along the top,

bottom and sides of the mounting sleeve. With the

sleeve fully inserted into the dashboard opening,

bend as many of the tabs outward as necessary so

that the sleeve is firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve, making

sure it is right-side-up, until it is fully seated and the

spring clips lock it into place.

FINAL ISO-DIN INSTALLATION

3

NOTE: For proper operation of the CD/DVD player, the

chassis must be mounted within 20° of horizontal. Make

sure the unit is mounted within this limitation.

INSTALL HALF SLEEVE

BA

ND

AS

Pr

es

s

A

ud

io

V

M

9

41

2

SR

C

4. Attach one end of the perforated support strap

(supplied) to the screw stud on the rear of the chassis

using the hex nut provided. Fasten the other end of the

perforated strap to a secure part of the dashboard either

above or below the radio using the screw and hex nut

provided. Bend the strap to position it as necessary.

RE

AR

DISP

O

P

RP

EN

T

SC

N

PT

Y

RD

Enter

M

ST

OP

M

U

T

E

2

1

4

CAUTION! The rear of the radio must be supported with

the strap to prevent damage to the dashboard from the

weight of the radio or improper operation due to

vibration.

5. Replace any items you removed from the dashboard.

5

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

ANTI-THEFT FEATURE

The VM9412 is equipped with an anti-theft feature requiring

the user to enter a password upon initial power on.

The default user password is 012345 (6 digits).

To change the anti-theft and RATINGS protection password,

perform the following steps:

1. Press the SETUP button (31) on the remote control or

touch the

button on the screen to enter the

“SETUP” menu.

2. Touch RATINGS to view the “RATINGS” sub-menu. The

small "lock" icon will be “unlocked”.

3. Enter a new 6-digit password and press ENTER.

The "lock" icon will lock and the new anti-theft password

will be set, as well as the password for RATINGS

protection (see “Rating Sub-menu Features” on

page 17).

NOTE: If you forget your password, contact Customer

Service at 1-800-323-4815 for assistance.

6

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

CONTROLS AND INDICATORS

Button Operation

1. OPEN/CLOSE

7

1

3

2

4

Press to activate the automatic mechanical system and

move the TFT monitor into viewing position. Press again to

close the TFT.

2. DISP

Press to cycle through information available on the LCD

screen.

OPEN

BAND

AS

DISP

3. AS

16

15

Enter

Press Audio

Press to automatically store the first six strong stations in

preset memory. Applies to current band only.

VM9412

PTY

5

4. BAND

SRC

REAR

RPT

SCN

RDM

STOP

MUTE

14

13

Press the BAND button to change the AM, FM or SAT

band.

5. AUDIO

Rotate to adjust the volume. Press to enter and/or confirm

audio settings.

18

19

21

10 11

9

20

22

8

12

6

6. SRC

Press to select playing mode.

7. LCD Display

8. MUTE

Press to silence the receiver. Press again to resume previous

volume level.

NOTE: The VM9412 features Softmute, which will allow

the volume to increase or decrease gradually when the

MUTE function is activated or deactivated.

9. IR Remote Control Receiver

10. (left joystick)

DVD/Disc Mode: Press once to play back the previous

chapter/track.

TUNER Mode: Press once to auto-search for the previous

available radio station.

MENU Mode: Press once to move the cursor to the left.

11. (down joystick)

DVD/Disc Mode: Press once for slow forward/slow reverse.

TUNER Mode: Press to go down one frequency step.

MENU Mode: Press once to move the cursor down.

12. Reset

Press to reset system settings to factory default (except the

password and parental lock setting).

7

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

CONTROLS AND INDICATORS

13.Pause/Play/Enter

7

1

3

2

4

Press to pause or resume playback or to confirm current

selection.

14. (right joystick)

DVD/Disc Mode: Press once to enter the next chapter or

track.

Multimedia Receiver

BAND

AS

DISP

CLOSE

TUNER Mode: Press once to auto-search the next available

radio station.

MENU Mode: Press once to move the cursor to the right.

15. (up joystick)

DVD/Disc Mode: Press once for fast forward/fast reverse.

TUNER Mode: Press to go up one frequency step.

MENU Mode: Press once to move the cursor up.

16. (

)

Press once for disc insertion/ejection.

Press and hold to reset core mechanism position.

17. TFT Display

17

18. REAR

Select rear zone source. Allows front passengers to listen to

the radio while rear passengers listen to a CD, MP3, WMA or

watch DVDs.

25

24

19. RPT

Press to control repeat playback function.

20. SCN

23

Press to initiate Preview Scan.

21. RDM

ANGLE

/

TILT

PICTURE

WIDE

Press to control Random playback function.

22. STOP

OPEN

BAND

AS

DISP

16

15

Radio Mode: Stop AS/PS/Seek procedure.

Enter

Press Audio

DVD/Disc Mode: Press the first time to pause playing.

Press the second time to stop playing and return to the first

track/chapter of the disc.

VM9412

PTY

5

SRC

REAR

RPT

SCN

RDM

STOP

MUTE

14

13

23. WIDE

Press to adjust the display aspect of the picture to one of two

settings: Full or Normal.

24/25. ANGLE/TILT

Press to activate the tilt function. Use the joystick to make

adjustments while the red tilt icon is flashing. Press once to

adjust the downward tilt angle of the screen one step at a

time or press and hold to adjust the angle in a continuous

motion.

18

19

21

10 11

9

20

22

8

12

6

8

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

REMOTE CONTROL

The VM9412 Remote controls both the front and rear zones.

To switch from front to rear zone, move the F/R switch (32)

located on the right side of the controller.

30

8

4

35

14

31

16

18

19

17

15

32

2

3

22

13

1

11

9

5

24

28

12

23

25

21

20

10

27

26

6

29

7

33

34

NOTE: Your remote control may differ slightly from the

one pictured here. The above diagram is for illustrative

purposes only.

9

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Table 1: Remote Control Functions

Button

Name

Function

TUNER

Ref#

DVD

VCD

CD/MP3

SATELLITE

iPod

MENU

1

Enters the main menu of the

disc

Turns on/off PBC when play-

ing VCD

Displays diagnostics screen

TITLE

MUTE

2

Enters the title menu of the

disc

Plays first ten seconds of

each chapter/title

Category list in CG mode

3

4

Toggles on/off audio output

Turns the power on/off

Toggles on/off audio output

Turns the power on/off

Toggles on/off audio output

Turns the power on/off

Toggles on/off audio output

Turns the power on/off

Toggles on/off audio output

Turns the power on/off

Toggles on/off audio output

Turns the power on/off

POWER/

AUDIO

5

6

7

Changes the audio language

for disc playback

Selects iPod Music mode

RPT A-B

RPT

Setup to repeat playback from Setup to repeat playback from

time frame A to time frame B

Repeats playback of current

chapter

Repeats playback of current

chapter

Repeats playback of current

track

Repeats playback of current

track

SRC

8

9

Selects playing mode

SUBTITLE

Language selection for subti-

tle

Selects iPod Photo mode

DISP/

CLEAR

10

Displays playing information/

Delete entry or move back-

Displays playing information/

Delete entry or move back-

wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct wards to correct error in Direct

Access mode

wards to correct error in Direct wards to correct error in Direct

Access mode

11

12

13

Zooms in when playing DVD,

DivX or Photo

Zooms in

Navigates the preset station

list

Navigates list window

Navigates the preset station

list

Navigates list window

Selects iPod Video mode

PRESET

ANGLE

Zooms out when playing

DVD, DivX or Photo

Zooms out

Navigates the preset station

list

Navigates the preset station

list

Plays back disc in different

angle (if available) for a scene different angle (if available) of

picture displayed

Plays back Picture CD with

Switches MEM keypad off

Joystick /\

VOL -

14

15

16

17

Fast forwards the disc content Fast forwards the disc content

Fast forwards the disc content

Decreases volume

Accesses iPod Menu

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

Decreases volume

Increases volume

VOL +

Increases volume

Joystick <

Selects the previous chapter

for playback

Selects the previous chapter

for playback

Searches an available radio

station by decreasing tuning

frequency

Selects the previous track for

playback

Searches an available radio

station by decreasing tuning

frequency

Pauses playback/starts play-

back

Joystick

(press)

18

19

ENTER, Pauses playback/

starts playback

ENTER, Pauses playback/

starts playback

Auto memory scan

ENTER, Pauses playback/

starts playback

ENTER, Toggles the on-

screen menu between CAT/

CH mode

ENTER

Joystick >

Selects the next chapter for

playback

Selects the next chapter for

playback

Searches an available radio

station by increasing tuning

frequency

Selects the next track for play- Searches an available radio

back

Selects the next track for play-

back

station by increasing tuning

frequency

20

21

22

23

Stops playback

GOTO

Enters Direct Access mode

Selects AM/FM Band.

Enters Direct Access mode

Fast reverses the disc content

Play/pause

Enters Direct Access mode

Play/pause

Joystick \/

||>/BAND

Fast reverses the disc content Fast reverses the disc content

Play/pause Play/pause

Selects SAT1, SAT2 or SAT3

band.

10

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Table 1: Remote Control Functions

Button

Function

TUNER

Name

Ref#

DVD

VCD

CD/MP3

SATELLITE

iPod

PIC

24

Displays Brightness/Contrast

Controls

Displays Brightness/Contrast

Controls

Displays Brightness/Contrast

Controls

Displays Brightness/Contrast

Controls

Displays Brightness/Contrast

Controls

Displays Brightness/Contrast

Controls

OPEN/

CLOSE

25

Opens/closes the TFT moni-

tor

Opens/closes the TFT moni-

tor

Opens/closes the TFT moni-

tor

Opens/closes the TFT moni-

tor

Opens/closes the TFT monitor Opens/Closes the TFT monitor

26

27

28

Decreases monitor tilt angle

Increases monitor tilt angle

Decreases monitor tilt angle

Increases monitor tilt angle

Decreases monitor tilt angle

Increases monitor tilt angle

Decreases monitor tilt angle

Increases monitor tilt angle

Decreases monitor tilt angle

Increases monitor tilt angle

Decreases monitor tilt angle

Increases monitor tilt angle

TILT

WIDE

Selects display mode: CIN-

EMA, NORMAL or Standby

Selects display mode: CIN-

EMA, NORMAL or Standby

Selects display mode: CIN-

EMA or Standby

Selects display mode: CIN-

EMA or Standby

Selects display mode: CIN-

EMA or Standby

Selects display mode: CIN-

EMA or Standby

1, 2, 3, 4, 5, 29

6, 7, 8, 9, 0

(Numeric

Directly accesses chapter

1-6 selects preset for current

band

Directly accesses track

1-6 selects preset for current

band

Keypad)

PIP

30

Picture In Picture view of

existing video

Picture In Picture view of

existing video

Picture In Picture view of exist-

ing video

SETUP

F/R

31

32

Displays Setup menu

F controls front zone

R controls rear zone

F controls front zone

R controls rear zone

F controls front zone

R controls rear zone

F controls front zone

R controls rear zone

F controls front zone

R controls rear zone

F controls front zone

R controls rear zone

RDM

33

34

35

Plays all chapters in random

order

Plays all tracks in random

order

Plays all tracks in random

order

SCN

Preview scan

Ejects disc

Plays the first ten seconds of

each track

Preview scan

Ejects disc

EJECT

Ejects disc

11

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

USING THE TFT MONITOR

Open/Close TFT Monitor

Open TFT Monitor

Monitor Left/Right Angle Adjustment

To manually adjust the left/right angle of the TFT screen,

follow these steps:

Aspect Ratio

Press the WIDE button (28) on the remote control or WIDE

button (23) on the monitor to adjust the aspect ratio as

follows:

Press the OPEN button (1) on the front panel or press the

1. Make sure the TFT screen in “Out”. Press the OPEN

(

) button (25) on the remote control to activate the

button (1), if necessary.

mechanism that moves the display panel into the viewing

position.

Extender Mechanism

- Fully Extended

Extender Mechanism

- Closed

Close TFT Monitor

CINEMA

Press the OPEN button (1) on the front panel or press the

The entire screen is extended

horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at

any point.

(

) button (25) on the remote control to load the display

panel back into the compartment.

TFT Monitor Auto Open

If “TFT Auto Open” is “on” when the unit is turned on, the

monitor automatically moves to the viewing position.

NORMAL

2

The conventional display image has a

4 to 3 ratio of horizontal to vertical,

leaving a blank area on the right and

left sides of the display.

If “TFT Auto Open” is ”off” when the unit is turned on, press

the OPEN button (1) or (

) button (25) on the remote

control to move the monitor into the viewing position.

STANDBY

If “TFT Auto Open” is set to ”Manual”, the TFT will not close

when the key is turned off.

Screen becomes black. Touch screen

to resume.

4

Monitor Tilt Angle Adjustment

A known characteristic of LCD panels is the quality of the

display in relationship to the viewing angle. The monitor

angle can be adjusted for optimum viewing using one of the

following methods.

Image Setting

Table 2 shows the video output mode for each playing

source.

2. Locate the extender mechanism behind the screen.

3. Firmly grasp both sides of the screen near the bottom.

4. Gently pull on either the left or right side until the

extender mechanism becomes fully extended.

Table 2: Video Output Modes

Step by Step Angle Adjustment

Press the ( ) or ( ) button on the remote control to adjust

the tilt angle of the screen one step at a time.

Playing Source

Video Output Modes

Reverse Driving Use

Continuous Angle Adjustment

AM/FM TUNER

RGB Mode

CVBS Mode

RGB Mode

CVBS Mode

If the rear-view video camera is connected, the unit is on, and

the monitor is stationed inside the main compartment of the

unit, the monitor automatically moves into the viewing

position and switches to CAMERA mode upon reverse

driving. When the reverse driving stops, the monitor returns

to the main storage compartment.

Press and hold the ( ) or ( ) button on the remote control

to adjust the tilt angle in a continuous motion.

SAT TUNER

iPod

DVD/Disc

AUX IN

NAV

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor returns to its original input

mode.

CAMERA

*CVBS – Composite Video Baseband Signal

12

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Parameter Adjustment Procedure

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following

protective measurements can be executed to prevent

damage to the mechanism or monitor:

1. Enter Picture Quality Setting Mode:

Press the PIC button (24) on the remote control or the

WIDE/PICTURE button (23) on the monitor.

2. Select Item to Set:

Use the up/down joystick buttons to select “BRIGHT” or

“CONTRAST”.

Table 3: Monitor Protective Measures

3. Set Parameters:

Self

Protection

OPEN Button

Pressed

Power

Reconnected

Obstruction

Use the left/right joystick buttons to modify the settings.

4. Exit Picture Quality Setting Mode:

Press the PIC button on the remote control or the WIDE/

PICTURE button on the monitor

Monitor load- Unit stops at

Monitor fully

Monitor is auto-

ing out hori-

zontally

obstruction

point

extended hori- matically

zontally

loaded into unit

Monitor load- Unit stops at

Monitor fully

Monitor is auto-

Parking Brake

Parking Brake Inhibit

ing in hori-

zontally

obstruction

point

extended hori- matically

zontally

loaded into unit

Monitor load- Unit stops at

Monitor swiv-

When the pink "Parking" wire is connected to the vehicle

brake switch, the front TFT monitor will display video

only when the parking brake sequence is engaged.

Before starting the parking brake sequence, the radio

must be on with the video media disc inserted and

playing.

ing out verti-

cally

obstruction

point

els back to the els back to the

unit

Monitor load- Unit stops at

Monitor swiv-

ing in verti-

cally

obstruction

point

els back to the els back to the

unit

After the protective procedure is executed, normal operation

is resumed by pressing the OPEN button (1) or disconnecting

and reconnecting the power.

Parking Brake Sequence

There are two situations that can start the Parking Brake

Sequence (this is the preferred method). The timing

window is between 3 ~ 5 seconds.

•

Parking brake is engaged (on) when the vehicle is

started or the accessory/ignition is turned on. To

activate video, the following sequence of events

must be completed:

a. Release parking brake for 3 ~ 5 seconds.

b. Reapply parking brake.

c. Video should be displayed on the TFT monitor

within 1 ~ 2 seconds.

•

Parking break is disengaged (off) when the vehicle

is started or the accessory/ignition is turned on. To

activate video, the following sequence of events

must be completed:

a. Set parking brake for 3 ~ 5 seconds.

b. Release parking brake for 3 ~ 5 seconds.

c. Reapply parking brake.

d. Video should be displayed on the TFT monitor

within 1 ~ 2 seconds.

13

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

OPERATING INSTRUCTIONS

CAMERA and NAV. The playing mode is displayed on the

TFT and LCD screens.

Table 4: Audio Adjustments

Power On / Off

Press the /SRC button (6) on the unit (or the /POWER

button (4) on the remote control) to turn the unit on. The

buttons on the front of the unit light up and the current mode

status appears in the LCD (7). You can also turn on the unit

by pressing the OPEN button (1) and opening the TFT

screen.

Function

Adjustment Options

Auxiliary Devices

EQ

User

In user mode, you

can manually adjust

each of the seven fre-

quency bands.

External peripheral devices can be connected to this unit via

RCA output or MediaLink³. Select “AUX1” or “AUX2” mode to

access and control connected auxiliary devices.

Acoustic

Urban

Rave

Use the on-screen

arrows to select a

predefined equaliza-

tion curve.

Source Menu

To access the SOURCE MENU, touch the TFT screen in the

top left corner of the screen.

Press and hold the button to power off the unit.The monitor

is drawn back into the main compartment.

Latin

Audible Beep Confirmation

An audible beep tone confirms each function selection. The

Beep tone can be disabled through the Setup menu.

Dance

Hip Hop

Rock

DISC

SOURCE MENU

FAD-BAL

Use this screen to adjust the output level for

each speaker in your surround system from 0

to -24dB. You can also adjust the master vol-

ume from this screen.

Volume Adjustment

To increase or decrease the volume level, turn the rotary

encoder (5) on the front panel or press the VOL+/ VOL-

buttons (15, 16) on remote control. When the volume level

reaches “0” or “40”, a beep sounds, indicating that the

adjustment limit has been reached. The volume ranges from

“0” to “40”. The LCD or TFT screen displays the volume level

for 3 seconds.

F

DISC

iPod

RADIO

SAT

NAV

R

O

N

T

NOTE: The EQ mode will automatically change to

“USER” when individual EQ bands are adjusted.

CAMERA

R

E

A

R

OFF

Proper setting of the Fader and Balance complement the

effects of the cabin equalizer.

AUX 1

AUX 2

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting

regardless of the volume setting prior to turning the unit off.

To program a specific turn-on volume level, turn the AUDIO

control (2) to adjust the volume to the desired turn-on volume.

Push and hold the AUDIO button while the yellow speaker

icon and level indication is displayed on the screen. The unit

will beep two times to confirm your turn-on volume setting.

The Audio menu will automatically exit after a few seconds of

inactivity. To exit quickly, touch the top left corner of the

screen or press and hold the AUDIO button (5).

This menu allows you to select a source for the front or rear

zone. Touch FRONT or REAR to choose the zone for which

you would like to specify the source. (See “Multi-ZONE

Operation” on page 15.)

System Reset

To correct a system halt or other

illegal operation, use the tip of a pen

[RESET] Button

Audio Control Menu

to press the reset button (12) located

on the front bottom-right corner of the unit. After a system

reset, the unit restores all factory default settings.

The Audio Control menu features a 7-band graphic equalizer,

which allows you to easily adjust your audio system to meet

the acoustical characteristics of your vehicle, which vary

depending on the type of vehicle and its measurements.

Proper setting of the Fader and Balance boosts the effects of

the cabin equalizer.

Mute

Press the MUTE button on the front panel (8) or remote

control (3) to mute the volume from the unit. Press the MUTE

button again to restore the volume. “MUTE” is displayed on

the LCD. Adjusting the volume or using any of the audio

setup features cancels the mute function.

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

Press the AUDIO button (5) on the front panel to display the

Line Mute

audio menu. To adjust an audio feature:

If the “MUTE” wire is connected, audio output mutes when a

telephone call is received by the car phone.

1. Use the left/right joystick buttons to highlight the audio

feature to be adjusted.

2. Press the joystick ENTER button on the control panel

(13) or remote control (18) to select the highlighted

option.

3. Use the joystick to adjust the selected feature to the

desired setting.

Playing Source Selection

Press the SRC button on the front panel (6) or remote control

(8) to change between available playing sources in the

following order: RADIO, SAT, DISC, AUX1, AUX2, iPod,

14

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

MULTI-ZONE OPERATION

Independent sources can be played simultaneously on the

VM9412. For example, a video game console can be seen on

the front screen while DVD video is available to rear

passengers.

Changing the Rear Zone Source

Turning the Rear Screen Off

To access the SOURCE MENU, touch the TFT screen in the

top left corner of the screen.

Touch the OFF button (on the SOURCE MENU) to suspend

operation of the rear screen. Any operation assigned

exclusively to the rear source will be suspended until

reactivated using either the front or rear zone touch screen or

the remote control.

Connecting the Rear Zone Touch Screen

You can connect up to two additional monitors (sold

separately) for rear passengers, one of which can be a Touch

Screen. You can also connect a wireless headphone system

to one of your rear monitors, as illustrated below.

DISC

SOURCE MENU

F

DISC

iPod

RADIO

SAT

NAV

R

O

N

T

Rear Video Screen

(Sold Separately)

CAMERA

R

E

A

R

YELLOW

OFF

VIDEO OUT 1

AUX 1

AUX 2

This menu allows you to select a source for the front or rear

zone. Touch FRONT or REAR to choose the zone for which

you would like to specify the source.

MZ7TFT Touch Screen

(Sold Separately)

YELLOW

Controlling the Rear Zone Screen(s)

VIDEO OUT 2

BLACK

If you have a rear touch screen installed, you can touch the

screen to control most rear zone functions.

MZ-TFT

WHITE

RED

NOTE: The rear zone volume can only be controlled from

the front.

You can also use the remote control. The VM9412 remote

controls both the front and rear zones. To switch from front to

rear zone, move the F/R switch (32) located on the right side

of the remote controller.

Wireless Headphone

(OPTIONAL)

NOTE: You cannot change or control the front zone

source from the rear zone video screen.

15

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

SETUP MENU

To access system settings, press the SETUP button (31) on

Audio Sub-menu Features

Setting

Options

Function

the remote control or touch the

button on the screen to

Setting

Options

Function

Clock Adjust

(HH:MM)

The clock appears in the top right

corner of the screen and on the

LCD screen during certain opera-

tions. NOTE: The AM/PM indication

will change as you continue to

adjust the hour past 12.

enter the “SETUP” menu. The “GENERAL” sub-menu

appears highlighted in blue.

DRC

Off

Employ the Dynamic Range Control

for better playback for low volumes.

On

Audio Mode

Dolby Pro II

Surround

Stereo

Choose Stereo to send the same

signal to the front and rear left/right

speakers. If you have a center

speaker, you can choose the Sur-

round option when supported by

your media.

Video Input

(Input cir-

cuitry autode-

tects the

video signal

from the Aux

In source).

NTSC

PAL

The color signals are output in the

standard NTSC format.

RADIO

SETUP

The color signals are output in the

standard PAL format.

General Language Audio Speaker Back

RDS

Auto

The color signal output is switched

automatically based on the current

video input signal - NTSC or PAL.

Music

Movie

Matrix

Optimized for music reproduction

when playing music encoded in

Dolby.

Clock Mode

12 Hour

04 : 31 AM

AUTO

Rating

DivX

Clock

Beep

On

Off

When turned on, an audible beep

tone confirms each function selec-

tion.

Optimized for video reproduction

when playing movies encoded in

Dolby.

Video Input

Beep

Hardware

P.VOL

No beep sounds.

Use with Dolby Matrix encoded

media.

On

TS Cal

Sub. W Filter 50Hz

Selecting a crossover frequency

sets a cut-off frequency of the sub-

woofer's LPF (low-pass filter).

Language Sub-menu Features

80Hz

If a DVD supports more than 1 Subtitle or Audio language, all

the languages are available for selection during playback. If

the selected language is not supported by the DVD, then the

default language is used.

Accessing Menu Items

Touch the sub-menu name or use the joystick to select a sub-

menu (Language, Audio, RDS, etc.).

100Hz

120Hz

150Hz

The features available for adjustment under the highlighted

sub-menu option will appear in the center of the screen.

Setting

Options

Function

Speaker Sub-menu Features

OSD

English

On Screen Display appears in

English.

•

Choose 4 CH, 4.1 CH or 5.1 CH depending on the

speaker configuration in your vehicle.

Adjusting a Feature

1. Use the touchscreen or press the /\ or V buttons on the

DVD Audio

English

Spanish

French

English

Spanish

French

Off

DVD Audio is heard in English

when the option is available.

•

Use the Test Tone feature to verify speaker settings.

Make changes using the EQ/FAD-BAL menu, accessed

by pressing and holding the AUDIO button (volume

control).

joystick to select the feature to be adjusted.

DVD Audio is heard in Spanish

when the option is available.

2. Enter the option field for the feature you want to adjust

by using the touchscreen or pressing the ENTER

(joystick) button. A submenu appears in a second row

with the selected option highlighted in blue.

3. Select a new value by using the touchscreen or pressing

the /\ or V buttons on the joystick.

DVD Audio is heard in French when

the option is available.

•

Sub.W Phase: Reverse the subwoofer signal polarity to

improve bass response related to speaker configuration.

DVD Subtitle

DVD subtitles automatically appear

in English when available.

RDS Sub-menu Features

DVD subtitles automatically appear

in Spanish when available.

4. Use the touchscreen or press the ENTER (joystick)

button to confirm setup.

Setting

Options

Function

DVD subtitles automatically appear

in French when available.

RDS

On

Unit will display Radio Data System

information when available.

General Sub-menu Features

DVD subtitles do not appear auto-

matically.

Off

On

Setting

Options

Function

CT

Automatically synchronize the

radio’s time based on RDS radio

signals.

Disc Menu

English

Spanish

French

DVD menu (if applicable) is dis-

played in English.

Clock Mode

12 Hour

Clock displays 12 hour time using

AM and PM.

DVD menu (if applicable) is dis-

played in Spanish.

24 Hour

Clock displays 24 hour time up to

23:59.

Off

DVD menu (if applicable) is dis-

played in French.

16

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

only by entering the correct password. Once the password is

entered, rating is available for setup.

Setting

Options

Function

Setting

Options

Function

Tuner Region USA

AM Frequency Spacing - 10kHz

AM Frequency Band -

Camera In

Normal

Mirror

Setting

Options

Function

Reverse the camera image as if

looking through a rear-view mirror.

530kHz~1720kHz

FM Frequency Spacing - 200kHz

FM Frequency Band -

87.5MHz~107.9MHz

Password

_ _ _ _ _ _

Enter the default six-digit password

(012345).

TFT Auto

Open

Auto

The TFT panel automatically opens

when the unit is turned on.

Rating

1. Kid Safe

2. G

Select the appropriate rating level

for the intended audience.

America 1

AM Frequency Spacing - 10kHz

AM Frequency Band -

530kHz~1720kHz

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

Manual

When the ignition is turned OFF, the

TFT panel DOES NOT retract if it

was previously out

You may override higher ratings by

using your password.

3. PG

Off

You must press the OPEN button

(1) to open the TFT panel.

4. PG-13

5. PG-R

6. R

Arabia

China

AM Frequency Spacing - 9kHz

AM Frequency Band -

TFT Set Back Off

On

TFT screen remains fully extended.

TFT screen moves back slightly

after opening.

531kHz~1620kHz

FM Frequency Spacing - 100kHz

FM Frequency Band -

7. NC-17

8. Adult

Auto Dimmer Off

On

TFT screen brightness remains

constant unless manually adjusted.

87.5MHz~108.0MHz

Load Factory Reset

Select “Reset” to restore the factory

default settings for the Rating sys-

tem only.

AM Frequency Spacing - 9kHz

AM Frequency Band -

522kHz~1620kHz

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

TFT screen will automatically dim

when less light is available.

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input

mode.

To reset the password, access the “RATING” menu and enter

the current password. Once the correct password is entered,

you can access the “Password” field and enter a new one.

America 2

Europe

Korea

AM Frequency Spacing - 5kHz

AM Frequency Band -

520kHz~1600kHz

FM Frequency Spacing - 100kHz

FM Frequency Band -

87.5MHz~108.0MHz

P.VOL Sub-menu Features

NOTE: Record the password and keep it in a safe place

for future reference. The rating for each disc is marked

on the disc, disc packing, or documentation. If the rating

is not available on the disc, the parental lock feature is

unavailable. Some discs restrict only portions of the disc

and the appropriate content will play. For details, please

refer to the disc description.

Setting

Options

Function

AM Frequency Spacing - 9kHz

AM Frequency Band -

522kHz~1620kHz

FM Frequency Spacing - 50kHz

FM Frequency Band -

87.5MHz~108.0MHz

Source

DISC

RADIO

SAT

Choose a source for which you

would like to increase the relative

volume (LEVEL).

Use the +/- buttons to increase rela-

tive volume for specified source up

to 6 decibels.

AM Frequency Spacing - 9kHz

AM Frequency Band -

531kHz~1602kHz

FM Frequency Spacing - 200kHz

FM Frequency Band -

88.1MHz~107.9MHz

iPod

DivX Sub-Menu Features

AUX1

AUX2

NAV

Select the DivX sub-menu to view your DivX registration

code. You must use this code to register your player, allowing

you to purchase video using the DivX Video On Demand

format.

OIRT (Inter- AM Frequency Spacing - 9kHz

national

Radio and

Television

Organiza-

tion)

AM Frequency Band -

531kHz~1602kHz

FM Frequency Spacing - 200kHz

FM Frequency Band -

88.1MHz~107.9MHz

Hardware Sub-menu Features

TS Cal (Screen Calibration)

If the rear-view video camera is connected, the unit is on, and

the TFT monitor is retracted inside the unit, the TFT monitor

automatically moves into the viewing position and Camera

mode is selected upon shifting into REVERSE gear. When

shifting into DRIVE gear, the TFT monitor is retracted back

inside unit.

To access the “Screen Calibration” function from the SETUP

menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a

corner quadrant of the screen. To begin calibration, press and

hold the crosshair for one second until it moves to the next

quadrant. Continue for each quadrant until the calibration is

completed.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to

prevent unauthorized persons from viewing restricted disc

content. By default, the rating system is set at the highest

setting (with no restrictions). The parental lock is released

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the

SETUP button (31) on the remote control or touch the BACK

button on the screen.

17

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

TUNER OPERATION

15. BAND: Touch to change between AM/FM bands

16. AS: Touch to automatically store stations

17. Touch to view the SOURCE MENU and select a new

playback source

Tuner TFT Display

•

Touch the or buttons on screen.

Move the joystick left/right.

8

1

4

5

10

2

24 25

17

3

Direct Tuning

18. MEM: View screen used to enter current channel into

preset memory

19. 1/2 or 2/2: Touch this page button to view a second page

of on-screen buttons

To enter a radio station directly, touch the

press the GOTO button (21) on the remote control to display

the direct entry menu.

button or

01:02 PM

FM-1

P1 87.5 MHz

LOC PTY RDS

RADIO

ST

20.

: Touch to view the SETUP menu

E

Q

P1

P2

P3

P4

P5

P6

87.5

90.1

MHz

21. PS (Preview Scan): Touch to scan all stations available,

stopping for 5 seconds at each and continuing until a

station is selected

22. LOC: Touch to tune to strong local stations

23. PTY: When PTY is pressed, the Program Type

categories are listed, allowing listeners to find similar

programming by genre. When a PTY category is

selected from the touch screen menu, the radio will start

scanning for the selected category.

FM: _ _ _ . _ MHz

MHz

98.1

1

4

7

0

2

5

8

3

6

9

106.1

107.9

102.9

Exit

AS

1/2

BAND

PS

PS:

Enter

Clear

24. Indicates the PTY function is activated

25. Indicates the RDS function is activated

6

7

Enter the desired radio station using the on-screen number

pad. Press Enter to tune to the selected station. To exit the

screen without changing the station, touch Exit. To clear your

entry and start over, touch Clear.

Switch to Radio Tuner source

9

20

•

Touch the top left corner of the screen (the RADIO

circle) to view the SOURCE MENU. Touch “RADIO”.

Press the SRC button (6) on the front panel or remote

control (8) to switch to the AM/FM or RADIO source.

14

12

•

Using Preset Stations

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the screen.

11

13

AS

PTY

16

23

Select FM/AM Band

BAND

15

1/2

19

PS

21

MEM

18

2/2

LOC

Touch the BAND button (15) on the screen, or press the

BAND button on the unit (4) or remote control (20) to change

between the following bands: FM1, FM2, FM3, AM1, and

AM2.

Storing a Station

1. Select a band (if needed), then select a station.

2. Press the 1/2 button (19) to view the second page of

menu options.

22

3. Touch the on-screen MEM button (18) to open the

preset screen.

NOTE: The BAND button on the unit only works when the

TFT is closed.

1. Current radio band indicator

2. Radio frequency indicator

3. Clock

4. Stereo broadcasting indicator

5. Strong Local signal broadcasting indicator

Seek Tuning

To seek the next higher station:

Mem: _

6. Preset radio stations: Touch to recall preset stations

7. RDS Information: PS (Program Service), PTY (Program

Type), RT (Radio Text)

8. Touch for quick access to Equalizer level settings

9. Touch to access the direct entry screen

10. Current preset station indicator

P1 P2

P3

P6

•

Touch the >>| button on screen.

Move the joystick to the right.

P4 P5

E x i t

To seek the next lower station:

•

Touch the |<<| button on screen.

Move the joystick to the left.

11. |<<: Touch to seek backward

12. >>|: Touch to seek forward

13. <<: Touch to tune backward one step

14. >>: Touch to tune forward one step

Manual Tuning

To increase or decrease the tuning frequency one step:

4. Touch the preset number in which you would like to

store the current station (or press EXIT to cancel and

18

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

close the menu). The preset number and station

appears highlighted.

Recalling a Station

1. Select a band (if needed).

2. Touch an on-screen preset button (6) to select the

corresponding stored station.

P1

P2

P3

P4

P5

P6

87.5 MHz

90.1 MHz

98.1 MHz

106.1 MHz

107.9 MHz

102.9 MHz

Auto Store (AS)

To select six strong stations and store them in the current

band:

1. Select a band (if needed).

2. Press the AS button (3) on the control panel or touch AS

on the screen for 2 seconds to activate the Auto Store

function.

The new stations replace stations already stored in that band.

Preview Scan (PS)

To scan the AM or FM band for a preview of available stations

in your particular area, touch the PS button (21) on page two

of the on-screen controls. Touch again to stop preview scan.

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a

strong local radio signal are played. To activate the Local

function in AM/FM tuner mode, touch the 1/2 button to access

the second screen of menu options, and then touch the on-

screen LOC button. Touch the LOC button again to turn Local

off. When the Local function is active, the LOC indicator at

the top of the screen is illuminated.

19

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

SATELLITE RADIO OPERATION

13. CAT -: Select previous channel in current category only

14. Touch to enter channel directly using keypad on screen

15. CG: Access Channel/Category Guide mode

3. Touch the preset number in which you would like to

store the current station (or press EXIT to cancel and

close the menu). The preset number and station

appears highlighted.

Listeners can subscribe to XM® Radio on the Web by

visiting www.xmradio.com, or by calling (800) 967-2346.

Customers should have their Radio ID ready (see

“Displaying the Identification (ID) Code”). Customers can

receive a limited number of free-to-air channels without

activation.

16. BAND: Change between SAT1, SAT2 and SAT3 bands

Recalling a Station

17.

: Touch to view the SETUP menu

1. Select a band (if needed).

2. Touch an on-screen preset button to select the

corresponding stored station.

18. Touch this area to view the SOURCE MENU and select

a new playback source

19. MEM: View screen used to enter current channel into

preset memory

20. DIAG: This feature is reserved for use by service

professionals for troubleshooting.

Listeners can subscribe to Sirius® Radio on the Web by

visiting www.sirius.com, or by calling (888) 539-SIRIUS.

Customers should have their Sirius ID ready (Sirius ID is

located on the Satellite Radio Tuner, sold separately).

Customers can listen to music samples by tuning to

channel 184.

Direct Tuning

To enter a radio station directly, touch the

press the GOTO button (21) on the remote control to display

the direct entry menu.

button or

Displaying the Identification (ID)

Code

Before you listen to satellite radio, you must subscribe to the

service using your radio’s identification number. To display

the radio ID, press the left/right buttons (16, 17) on the

joystick or the CH - or CH + buttons on the touch screen

repeatedly to tune to channel “000”. The screen displays the

radio ID where the channel name is usually displayed.

Accessing Satellite Radio Mode

Press the SRC button (8) on the front panel or remote control

(8) to switch to the SAT source.

CH NO: _ _ _ /255

1

4

7

0

2

5

8

3

6

9

Exit

1

3

2

7

8

4

18

Selecting a Station

Use the left/right joystick buttons or the CH - or CH + buttons

on the touch screen to change to another station.

01:02

SAT1

XM Preview

CH001

SAT

Enter

Preview

Clear

17

14

12

E

Q

P1

P2

P3

P4

P5

XM Preview

Preset Mode

+

Enter the desired radio station using the on-screen number

pad. Touch the Enter button to tune to the selected station.

To exit the screen without changing the station, touch Exit. To

clear your entry and start over, touch Clear.

CAT

To enter preset mode, touch the BAND button on the screen,

or press the BAND button on the unit (14) or remote control

(20) to change between the following bands: SAT1, SAT2, or

SAT3 (indicated in the top left corner of the TFT screen).

CH

-

CH

+

11

CG

CAT

-

15

13

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the TFT screen.

BAND MEM

DIAG

Channel/Category Guide Mode

Title: Fridays XM144!

There are two search modes to help navigate through

channels and or categories. To access the Channel/Category

Guide mode, press the ENTER button (18) on the remote

control or the CG button on the touch screen.

5

6

9

10

16

19

20

Storing a Station

1. Select a band (if needed), then select a station.

2. Touch the on-screen MEM button (18) to open the

preset screen.

1. SAT channel name

2. SAT channel number

3. SAT band

4. Time

5. Song title

6. Artist name

7. Song category

8. Signal strength indicator

9. Current preset channels/on-screen preset buttons

10. CH -: Select the previous channel

11. CH +: Select the next channel

Channel Guide is the default search mode. To access

Category Guide, press the TITLE button (2) on the remote

control or touch CAT on the touch screen. To return to

Channel Guide, touch CH on the screen or press the

SUBTITLE button (9) on the remote control.

Mem:

P1 P2

P3

P6

Channel Guide Mode

When Channel Guide mode is selected, the first six satellite

channels are displayed in the boxes in the bottom left of the

TFT screen and the on-screen menu changes to facilitate

search mode.

P4 P5

E x i t

12. CAT +: Select next channel in current category only

20

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

01:02

SAT1

XM Preview

CH001

Preview

SAT

E

Q

########

001 XM Preview

004 The 40s

005 The 50s

006 The 60s

007 The 70s

CH

CG

CAT

SCN

MEM

DIAG

Title: www.xmradio.com

•

While in Search Mode, to switch between Channel and

Category search modes, press the CH or CAT buttons

on the touch screen.

Use the scroll bar and arrows on the touch screen to

view the next/previous page of stations. Each page

contains six channels to select from.

•

Press the on-screen SCN button to preview each of the

6 channels displayed for 10 seconds.

Press the CG button to return to the Preset Mode

screen.

To select a channel while in Channel Guide mode, touch

the channel name on the screen. The channel will begin

playing and the unit will return to the Preset Mode.

Category Guide Mode

When Category Mode is selected, folder icons appear on the

screen next to category choices.

•

While in Search Mode, to switch between Channel and

Category search modes, press the CH or CAT buttons

on the touch screen.

Use the scroll bar and arrows on the touch screen to

view the next/previous page of categories. Each page

contains six categories to select from.

To select a category, touch the corresponding category

name or folder icon. The channels in that category will

be displayed on the screen.

Use the scroll bar and arrows on the touch screen to

view the next/previous six stations in the selected

category.

Touch the on-screen SCN button to preview each

channel in the selected category for 10 seconds.

Touch the channel name to play that channel.

Touch the on-screen CG button to return to the Preset

Mode screen.

•

21

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

DVD/VCD VIDEO OPERATION

Controlling Playback

To access the on-screen controls, touch the screen. Touch

the 1/2 button to view a second page of controls

NOTE: When properly installed, DVD video cannot be

displayed on the main TFT screen unless the parking

brake is applied. If you attempt to play a DVD while the

vehicle is moving, the TFT screen displays “PARKING”

with a blue background. Rear video screens, if

applicable, will operate normally.

NOTE: For VCD play, the repeat function is not available

if PBC is on.

Sectional Repeat Function (A-B)

BACK

EQ

BACK

Use the A-B function to define a specific area of a disc to

repeat.

•

Press the RPT A-B button (6) on the remote control (or

the A-B button on screen) to set the start point (A) of the

repeated section.

Press the RPT A-B button again once you reach the

desired end point (B) of the repeated section. The

selected portion of the DVD will now repeat

continuously.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

AUDIO

To open the TFT video screen, press the OPEN button (1).

The unit beeps and then opens.

A-B

•

Closing the TFT Screen

SUBTITLE

Press the OPEN button (1) again to close the TFT screen. If

the screen is in the “IN” position, it moves out before closing.

•

Press the RPT A-B button again to cancel the A-B

section setting and stop repeat play.

MENU

TITLE

DISP

1/2

2/2

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered and disc

play begins.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button on

the control panel (21) or remote control (33) to activate

random playback and play all chapters/tracks in random

order. “On” appears on the screen.

Stopping Playback

Touch the stop button ( ) on the screen or press the

BAND button (20) on the remote control to stop DVD play.

/

NOTE: If Parental Lock (Rating) is activated and the disc

inserted is not authorized, the 6-digit code must be

entered and/or the disc must be authorized (see “General

Sub-menu Features” on page 16).

Pausing Playback

Press the > button on the joystick to play the next random

track.

Touch the pause button (||) on the screen (or press the >/||

button on the remote control) to suspend disc playback.

Press the > button on the screen to resume disc playback.

Press the RDM button again to turn random play off.

You cannot insert a disc if there is already a disc in the unit or

if the power is off.

Fast Forward Playback

NOTE: When a VCD is playing with PBC turned “On”,

activating random playback automatically turns PBC off.

Press the /\ button on the joystick or the >> button on the

screen to fast forward. Keep pressing and releasing the

button to increase the rate from “2X” to “4X”, “6X”, and “8X”.

NOTE: DVD-R and DVD-RW will not play unless the

recording session is finalized and the DVD is closed.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the

main DVD menu. Use the joystick to select a title from the

menu or touch the title on screen.

Press the joystick enter button (18) on the remote control or

touch the play button (>) to resume normal playback.

Ejecting a Disc

Fast Reverse Playback

Press the button (21) on the unit or remote control (35) to

eject the disc. The unit automatically reverts to Tuner mode.

You may eject a disc with the unit powered off. The unit will

remain off after the disc is ejected.

Press the \/ joystick button or touch the << button on the

screen to play the current title in fast reverse. Keep pressing

and releasing the button to increase the rate from “2X” to

“4X”, “6X”, and “8X”.

Press the TITLE button (2) on the remote control or on

screen to select a different title for playback.

Press the ENTER (joystick) button to confirm your selection

and begin playback. You can also select a title using the

touch screen.

Reset the Loading Mechanism

Press the joystick ENTER button (18) on the remote control

or touch the play button (>) to resume normal playback.

If the disc loads abnormally or an abnormal core mechanism

operation occurs, press and hold the button (21) on the

unit or remote control (35) to reset the loading mechanism.

Normal operation resumes.

Moving Through Chapters

Press the > button on the joystick or the >>| button on screen

to advance to the next chapter on the DVD.

Repeat Playback

Press the RPT button (19) on the control panel, the RPT

button (7) on the remote control, or the

button on screen

to alter repeat mode according to the following:

Press the < button on the joystick or the |<< button on screen

to move to the previous chapter.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,

press the SRC button (15) on the front panel or remote

control (8) until “DISC” appears at the bottom of the screen.

•

DVD: Repeat Chapter, Repeat Title, Repeat Off

VCD (PBC Off): Repeat Single, Repeat Off

22

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

•

00:41:28 – “00:41:28” indicates the playback time of the

current title.

Direct Chapter / Track Selection

Remote Control Direct Entry

Zooming

Press the PRESET /\ and \/ buttons (11, 12) on the remote

control to enlarge and pan through the video image using the

following options: “ZOOM 1.5”, “ZOOM 2”, “ZOOM 3”, and

“OFF”.

The following information is displayed at the bottom of the

screen:

During DVD, VCD and CD playback, you can use the

numeric keypad on the remote control (29) to access a track

directly.

•

Front: Source

Rear: Source

CLOCK

Multi-Language Discs (DVD Only)

Changing Audio Language

VCD Playback Information

If you are watching a disc recorded in multiple languages,

press the AUDIO button (5) on the remote control to choose

a language.

The following information is displayed at the top of the screen

during VCD playback:

•

VCD2.0 – Format of current disc.

Title: 06/18 – “06/18” indicates the sixth of 18 tracks on

the VCD is currently playing.

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with

subtitles, press the SUBTITLE button (9) on the remote

control to choose the language in which you would like the

subtitles to appear.

•

00:02:18 – “00:02:18” indicates the playback time of the

current track.

Touch Screen Direct Entry

To select a title, chapter/track, or specific playback time

NOTE: During VCD playback, press the AUDIO button (5)

on the remote control to choose between Left Channel,

Right Channel, and Stereo.

directly, touch the

direct entry menu.

button on screen control to display the

PBC (Play Back Control - VCD Only)

Chapter: _ _

For VCDs with play back functionality, play back control

(PBC) provides additional controls for VCD playback.

1

4

7

0

2

5

8

3

6

9

Exit

Press the MENU button (1) on the remote control to toggle

the PBC function “On”/”Off”. Once PBC is on, playback starts

from track 1 of the play list.

Enter

NOTE: When PBC is activated, fast forward, slow

playback, and previous/next track are available. Repeat

and direct track selection are not available.

Clear

Use the

button to select Title, Chapter, or Time entry.

Title: _/#

Chapter: _ _/##

Time: _ _:_ _:_ _

When PBC is activated, selecting random, scan, or search

playback automatically deactivates PBC.

•

Playback Information

During DVD and VCD playback, press the DISP button on the

control panel (2) or remote control (10) to display playback

information on the screen, including the media playing and

current playback time.

Enter the desired title, chapter/track, or time using the on-

screen number pad and then press the Enter button. To exit

the screen without making a selection, touch Exit. To clear

your entry and start over, touch Clear.

DVD Playback Information

Viewing an Alternate Picture Angle

(DVD Only)

The following information is displayed at the top of the screen

during DVD playback:

Some DVDs contain scenes that have been shot

•

Title: 05/08 – “05/08" indicates the fifth of 8 titles on the

DVD is currently playing.

Chapter: 012/016 – “002/016" indicates that the second

of 16 titles on the DVD is currently playing.

simultaneously from different angles. For discs recorded with

multiple angles, press the ANGLE button (13) on the remote

control to toggle available angles of the on-screen image.

•

23

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

General Disc Information

Table 5: Disc Properties

Symb

Max Play

Time

12cm Disc Properties

ol

(MPEG 2

Single side single layer (DVD-5)

Single side double layer (DVD-9)

Double side single layer (DVD-10)

Method)

133 minutes

242 minutes

Double side double layer (DVD-18) 266 minutes

484 minutes

(MPEG 1

Single side single layer (VCD)

Single side single layer

Method)

74 minutes

Table 6: Disc Symbols

Symbol

Meaning

Number of voice languages recorded. The num-

ber inside the icon indicates the number of lan-

guages on the disc (maximum of 8).

Number of subtitle languages available on the

disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box

and “PS” stands for Pan/Scan. In the example on

the left, the 16:9 video can be converted to Letter

Box video.

Indicates the region code where the disc can be

played.

•

Region 1: USA, Canada, East Pacific Ocean

Islands

Region 2: Japan, Western Europe, Northern

Europe, Egypt, South Africa, Middle East

Region 3: Taiwan, Hong Kong, South Korea,

Thailand, Indonesia, South-East Asia

Region 4: Australia, New Zealand, Middle and

South America, South Pacific Ocean Islands/

Oceania

•

Region 5: Russia, Mongolia, India, Middle

Asia, Eastern Europe, North Korea, North

Africa, North-West Asia

•

Region 6: Mainland China

ALL: All regions

24

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

DVD/CD AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and CD operation. Please see the DVD/Disc Video

Operation section for information about these topics.

14. Touch to access the direct entry screen

Fast Forward

Touch the >> button on screen or press the /\ button on the

joystick to fast forward. Keep pressing and releasing the

button to increase the rate from “2X” to “4X”, “6X”, and “8X”.

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new

playback source

The VM9412 will play music or other audio files from the

following disc media:

Direct Track Entry

•

CD-DA

CD-R/RW

DVD

DVD+R/RW

DVD-R/RW

Controlling Playback

Stopping Playback

To select a track directly, touch the

display the direct entry menu.

button on screen to

Touch the button on screen or press the button (20) on

the remote control to stop disc playback.

TRACK: _ _ _

Upon inserting a disc with the TFT screen open, the disc and

track title (if available), along with the track number and

playing time appear on the screen.

To resume playback, touch the button on screen or press

the joystick button.

1

4

7

0

2

5

8

3

6

9

Exit

Pausing Playback

CD Player User Interface

The on-screen indicators and touch key areas for CD

playback are outlined below.

Touch the button on screen or press the joystick button to

suspend or resume disc playback.

Moving Through Tracks

Enter

Press the >>| button (19) on the remote control or on screen

or use the > button on the joystick to advance to the next

track on the disc.

Clear

17

1

2

15

3

16

01:02

Enter the desired track number using the on-screen number

pad, and then press the Enter button. To exit the screen

without making a selection, touch Exit. To clear your entry

and start over, touch Clear.

Press the |<< button (17) on the remote control or on screen

or use the < button on the joystick to move to the previous

track.

DISC

CD 1/10

01:23

04:31

E

Q

1

2

3

4

5

6

Track 01

Repeat Playback

14

10

Track 02

Track 03

Track 04

Track 05

Track 06

Touch the

button on screen, press the RPT button on the

remote control (7) control panel (19) to alter repeat mode

according to the following:

8

6

•

DVD: Repeat Chapter, Repeat Title, Repeat Off

CD-DA: Repeat One, Repeat All, Repeat Off

CD-R/RW: Repeat One, Repeat All, Repeat Off

DVD-R/RW: Repeat One, Repeat All, Repeat Off

4

9

12

13

7

5

11

Track Scan Select (CD-DA discs only)

During disc play, press the SCN button on the remote control

(34) or control panel (20) to play the first 10 seconds of each

track. When a desired track is reached, press the SCN button

again to cancel the function and play the selected track.

1. Current track and total number of tracks on disc

2. Elapsed playing time/length of track

3. Current time

4. Track titles

5. Disc title

Random Play Select

While disc play is stopped, touch the

button on screen or

6. ||: Touch to pause/play disc playback

the RDM button on the remote control (33) or control panel

(21) to play the tracks on the disc in a random, shuffled order.

7.

: Touch to stop disc playback

8. >>|: Touch to move to next track

Touch the

mode.

(RDM) button again to cancel Random Play

9. |<<: Touch to move to previous track

10. >>: Touch to fast forward current track

11. <<: Touch to rewind current track

12. Touch to activate/deactivate Repeat play mode

13. Touch to activate/deactivate Random mode

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

25

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

MP3/WMA/iPod OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and MP3 operation. Please see the DVD/Disc Video

Operation section for information about these topics.

MP3 Playing Order

MP3/iPod User Interface

The on-screen indicators and touch key areas for MP3

playback are outlined below.

When selected for play, files and folders (Folder Search, File

Search or Folder Select) are accessed in the order they were

written by the CD writer. As a result, the order in which they

are expected to be played may not match the order in which

they are actually played. You may be able to set the order in

which MP3/WMA files are to be played by writing them onto a

medium such as a CD-R with their file names beginning with

play sequence numbers such as "01" to "99".

MP3/WMA Media and File

Requirements

This player allows you to play back MP3 and WMA files

recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.

For CD-RW discs, please make sure it is formatted using the

full method and not the quick method to prevent illegal disc

operation.

20

14

17

18

1

2

3

16

01:02 AM

(Root)

DISC

MP3 4/84

00:00:23

For example, a medium with the following folder/file hierarchy

is subject to Folder Search, File Search or Folder Select, as

shown below.

E

Q

15

1

2

3

4

5

6

Cherry Poppin Da

Chris Isaak - Baby

Crazy Town - Butt

Phish - Birds Of A

Phish - Bouncin' R

Phish - Freebird (L

Up to 1500 songs/files can be burned onto a disc for a MEGA

DVD music mix. Do not exceed this number of songs/files or

disc readability problems may occur.

10

8

6

MP3 Format Compatibility

The file naming formats listed below are compatible with this

unit:

1/2

•

ISO 9660 – file name: 12 characters, file extension: 3

characters

ISO 9660 – file name: 31 characters, file extension: 3

characters

Joliet – 64 characters

19

20

4

7

9

11

5

24

22

23

If the file or folder name does not conform to ISO 9660 file

system standards, it may not be displayed or played back

correctly. Use the following settings when compressing audio

data for your MP3 disc:

ALL

•

Transfer Bit Rate: 128kbps

Sampling Frequency: 48kHz

2/2

DIR +

13

DIR -

12

When recording MP3 up to the maximum disc capacity,

disable additional writing. For recording on an empty

disc up to maximum disc capacity, use the "Disc at

once" setting.

25

1. Current track and total number of tracks on root of disc

2. Elapsed playing time

The VM9412 player will only recognize three folder levels and

does not display folders containing only other folders. In the

example above, the unit will display folders 3, 4, 6, and 8, but

not 2 and 7 since they do not contain any tracks directly.

Folder 5 is not recognized at all since it is at the fourth level.

3. Current time

4. Track titles

5. ID3 information

6. || : Touch to play/pause disc playback

7.

: Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. >>: Touch to fast forward

11. <<: Touch to fast rewind/reverse

12. DIR -: Touch to view the previous folder

13. DIR +: Touch to view the next folder

14. Touch to access the direct entry screen

15.

: Touch to view the SETUP menu

26

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new

playback source

18. Folder name

19. 1/2 or 2/2: Touch this page button to view a second page

of on-screen buttons

Random Play Select

Fast Forward/Fast Reverse

Press the RDM button (33) on the remote control to play the

files on the disc in a random, shuffled order. Press RDM

again to cancel Random Play mode.

Press and hold the |<< or >>| buttons on screen or on the

remote control (17, 19) for 1 second and continue to hold for

fast forward or fast reverse. Release to resume normal

playback.

Search Playlist/Artist/Album/Song

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

20. Touch the scroll bar and arrows to view the previous/

next page of songs

To search through Playlists, Artists, Albums and Songs, press

the 1 button (29) on the remote control keypad while in one of

the following directories: Playlist, Artist, Album or Song. The

selected directory will be accessed with the number of pages

and files in that directory displayed at the top of the page. To

access the page or file, enter the page or file number directly

from the remote control keypad. Press the |<< or >>| button

(17, 19) on the remote control or the < or > button (16, 17) on

the joystick to select the desired song or file.

21. Touch to activate/deactivate Repeat play mode

22. Touch to access the Music menu

23. Touch to access the Video menu

24. Touch to access the Photo menu

25. Browse all files

Controlling your iPod

The unit will automatically switch to iPod mode when an iPod

is plugged into the MediaLink³. To return to the iPod menu

from any other source menu, press the SRC button (6) on the

front panel or remote control (8) until the iPod menu appears

on the screen.

Controlling MP3/WMA Disc Playback

Playing MP3/WMA Files

Photo Playback

After inserting a MP3/WMA disc, files will play in the

sequence of the “Root’ directory.

NOTE: Be sure your iPod has the latest Apple firmware

installed to avoid connectivity issues.

While iPod photos can be viewed on the VM9412 screen, you

must use the iPod to control photo playback options.

NOTE: When burning MP3 / WMA files onto a DVD disc,

use the 2X or 4X burning option, if available. This slower

burning speed will help eliminate buffer errors and

increase disc reading reliability. Also, use folders when

burning large numbers of songs / files to a disc for easy

music navigation. Select the "Disc at Once" option and

close your disc.

The following touch screen icons and remote control buttons

are used to access the iPod menus:

Touch the

icon on screen or press the MENU button (1) on

the remote control to access the iPod PHOTO mode. The

VM9412 will release control back to the iPod so you can

select video media to be displayed on the TFT monitor. To

exit PHOTO mode, touch the screen.

Menu

Touch Screen

Remote Control

Music

TITLE

Video Playback

Photos

Videos

MENU

AUDIO

While iPod video can be viewed on the VM9412 screen, you

must use the iPod to control video playback options.

Stopping Playback

Touch the button on screen or press the /BAND button

(20) on the remote control to stop disc playback.

Touch the

button on screen or press the AUDIO button

(5) on the remote control to access iPod VIDEO mode. The

VM9412 will release control back to the iPod so you can

select video media to be displayed on the TFT monitor. To

exit VIDEO mode, touch the screen, press the >> button (14)

on the remote control, or press the MENU button on the iPod.

Use the touchscreen, the joystick, or the directional keys on

the remote control to navigate the iPod menus.

To resume playback, touch the button on screen, press the

joystick button (13) on the front panel, or press the >/|| button

(18) on the remote control.

iPod Music Playback

Pausing Playback

To access iPod music files, touch the button on screen or

press the TITLE button (2) on the remote control.

Touch the button on screen, press the joystick button (13)

on the front panel, or press the >/|| button (18) on the remote

control to suspend or resume disc playback.

•

Touch the > || button on screen to play/pause.

Touch >>| on screen, press the >>| button (19) on the

remote control, or press the > button on the joystick (17)

to move to the next item on the menu.

NOTE: To transmit the video from your iPod to the

VM9412 screen, you must set the following options

through the iPod video settings menu: TV Out = On, TV

Signal = NTSC, and Widescreen = On.

Moving Through Tracks

Press the >>| button (19) on the remote control or on screen

or use the > button on the joystick (14) to advance to the next

track on the disc.

•

Touch |<< on screen, press the |<< button (17) on the

remote control, or press the < button on the joystick (16)

to move to the previous item on the menu.

Use the touch screen or press the >/|| button (18) on the

remote control or the joystick ENTER button (20) on the

control panel to select the highlighted menu option.

Press the >> button (14) on the remote control or the /\

button (18) on the joystick, or touch the MENU button on

screen to return to the previous menu.

NOTE: After disconnecting your iPod, the VM9412 will

always return to the last mode accessed when the iPod

is plugged back into the unit.

Press the |<< button (17) on the remote control or on screen

or use the < button on the joystick (10) to move to the

previous track.

Repeat Playback

Touch the

button on screen or press the RPT button (7)

on the remote control to alter repeat mode according to the

following: Repeat Single, Folder Repeat, Repeat Off.

27

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Direct Track/File Entry

To select a track/file directly, touch the

control to display the direct entry menu.

button on screen

TRACK: _ _ _

1

4

7

0

2

5

8

3

6

9

Exit

Enter

Clear

Enter the desired track/file using the on-screen number pad.

Press the Enter button to tune to the selected station. To exit

the screen without changing the station, touch Exit. To clear

your entry and start over, touch Clear.

You can also use the numeric keypad (29) on the remote

control to access files directly.

28

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

TROUBLESHOOTING

Table 7: Troubleshooting

Problem

Cause

Corrective Action

GENERAL

Unit will not power on

Radio Fuse blown

Car battery fuse blown

Illegal operation

Install new fuse with correct rating

Press the RESET button located in the bottom right corner of the front panel

Replace battery with new one

Remote control does not function

No/low audio output

Battery depleted

Battery installed incorrectly

Improper audio output connection

Volume set too low

Remove battery and install correctly

Check wiring and correct

Increase volume level

Improper “MUTE” connection

Speakers damaged

Review wiring diagram and check “MUTE” connection

Replace speakers

Heavily biased volume balance

Speaker wiring is in contact with metal part of car

Pirated disc is in use

Adjust the channel balance to the center position

Insulate all speaker wiring connections

Use original copy

Poor sound quality or distortion

Speaker power rating not compatible with unit

Speaker is shorted

Connect proper speakers

Check speaker contact

Tel-Mute malfunction

“MUTE” wire is grounded

Check that the “MUTE” connection is not grounded and that it’s properly insulated

Unit resets itself when engine is off

Incorrect connection between ACC and positive battery Check wiring and correct

wire

TFT MONITOR

Monitor does not open automatically

No image

TFT Auto Open is turned off

Turn TFT Auto Open on

Incorrect connection to parking brake wire

PRK SW is activated and parking brake is not engaged

DVD is not compatible with current TV system settings

Improper video signal connections

Check wiring and correct

Stop vehicle in safe place and apply parking brake

Change setup to accommodate disc

Check wiring and correct

Flashing image or interference appears on screen

Prolonged image or improper height/width ratio dis- Improper aspect ratio setup

play

Use correct aspect ratio setting

Monitor stops at incorrect position

TUNER

Moving path is blocked

Press OPEN key to restart monitor movement

Weak station searching

Auto antenna is not fully extended

Auto antenna not properly connected

LOCAL function is activated

Disc already inside unit

Connect the auto antenna control cable properly

Turn LOCAL function off

Cannot insert disc

Eject current disc and insert new one

29

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Table 7: Troubleshooting

Problem

Cause

Corrective Action

Disc does not play back

Disc is warped or scratched

Use disc in good condition

Disc is dirty or wet

Clean disc with soft cloth

Clean laser pickup with cleaning disc

Use compatible disc

Laser pickup is dirty

Incompatible disc is used

Disc rating exceeds Parental Lock rating limit

Disc region code is not compatible with unit

Disc is inserted upside down

Disc is illegally copied

Change Parental Lock settings to lower restriction

Use disc with proper region code

Insert disc with label side up

Image blurred, distorted, or dark

PBC cannot be used during VCD playback

No repeat or searching while playing VCD

MP3

Use original disc

PCB is not available on the disc

PCB is on

Turn PCB off

Interruption occurred during playback

Disc is dirty or scratched

Clean disc or replace

File is damaged/bad recording

Message is longer than LCD can display

Recreate disc with good files

Incorrect playback message displayed

SAT RADIO

No Sound

Incorrect cable connections

Check RCA cables

Satellite source not available

IPOD

Check Satellite Data cable

iPod source not available

Incorrect cable connections

Check jLink and MediaLink cables

Cannot see video and photo media on TFT screen Wrong iPod Video Settings

Change iPod video settings to TV Out = On

Error Messages

Table 8: Error Messages

Message Displayed

Cause

Corrective Action

Loading

No Disc

Disc is being read

Disc is dirty

Clean disc with soft cloth

Insert disc with label side up

Insert disc

Disc is upside down

Disc not present in loading compartment

Disc is dirty

Bad Disc

Clean disc with soft cloth

Insert disc with label side up

Disc is upside down

Unknown disc

Region Error

Error

Disc format is not compatible with this unit

DVD is not compatible with region code of unit

Illegal mechanism operation

Press EJECT key for 5 seconds to reset loading mechanism

30

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

Care and Maintenance

1. Use only a clean silicone cloth and neutral detergent to

clean the front panel or monitor. A rough cloth and non-

neutral detergent (such as alcohol) may result in

scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a

protective circuit automatically stops play of the disc. If

this occurs, allow the unit to cool before operating the

player again.

4. Never insert anything other than a 5” (12 cm) disc into

the player as the mechanism can be damaged by

foreign objects.

5. Do not attempt to use a 3” (8 cm) CD-Single disc in this

unit, either with or without an adaptor, as damage to the

player and/or disc may occur. Such damage is not

covered by the Warranty on this product.

6. The CD player may not operate properly in extreme hot

or cold. If such conditions occur, allow the interior of the

vehicle to reach a normal temperature before using

player.

7. When the vehicle warms up during cold weather or

under damp conditions, condensation may appear on

the LCD panel. Should this occur, the screen will not

operate properly until the moisture has evaporated.

8. We suggest you use a cleaning disc in this unit more

frequently than in the unit in your home due to the

environmental conditions of the vehicle.

31

Download from Www.Somanuals.com. All Manuals Search And Download.

VM9412

SPECIFICATIONS

DVD/CD Player

Fuse: 15-amp, mini ATM type

Compatible Disc Media: DVD +/- R/RW (Single and Dual

Layer) and CD-R / RW

DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x

50mm)

Compatible Media Formats: CD-DA, MP3, WMA, VCD,

SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD

(JPEG).

CEA Power Ratings

Signal to Noise Ratio: >95dBA

Dynamic Range: >95dB

Frequency Response: 20Hz to 20 kHz, -3dB

Channel Separation: > 60dB @ 1 kHz

D/A Converter: High performance 24-bit / 192 kHz sample

rate, Multi-Bit Sigma-Delta Modulator

Video

Format: NTSC, PAL (auto-detection)

Output: 1Vp-p (75-ohm)

Input: 1Vp-p (75-ohm)

Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ <

1% THD+N

Signal to Noise Ratio: 70dBA below reference (Reference: 1

Watt, 4-Ohms)

FM Tuner

Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used

as reference input)

Reference Supply Voltage: 14.4VDC

Mono Sensitivity (-30dB): 9dBf

Quieting Sensitivity (-50dB): 15dBf

Alternate Channel Selectivity: 70dB

Signal to Noise Ratio @ 1 kHz: 58dB

Image Rejection: 80dB

*Specifications subject to change without notice.

Stereo Separation @ 1 kHz: >30dB

Frequency Response: 30Hz - 15 kHz, -3dB

AM Tuner

Sensitivity (-20dB): 15uV

Signal to Noise Ratio @ 1 kHz: 50dB

Image Rejection: 60dB

Frequency Response: 50Hz - 2 kHz, -3dB

Monitor

Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen

• 6.06" (154.1mm) W X 3.42" (87mm) H

Screen Type: TFT Liquid Crystal Display (LCD) active matrix

Response Time: 30mSec rise time, 50mSec fall time

Resolution:

• 336,960 sub pixels, 1440 (W) X 234 (H)

Viewing angle:

• 65 degrees left or right

• 40 degrees up

• 65 degrees down

General

Auxiliary Input Impedance: 10k-ohm

Power Supply: 11 to 16VDC, negative ground

Power Antenna (Blue): 500mA max, current limited protection

Amplifier Remote (Blue/White): 500mA max, current limited

protection

Operating Temperature: -20C ~ 65C

32

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

DO NOT RETURN THIS PRODUCT TO THE STORE

CD or Multimedia Radios/Headunits

Audiovox Electronics Corporation (“the Company”) is committed to

quality and customer service, and are pleased to offer you this

Warranty. Please read it thoroughly and contact the Company at 1-800-

323-4815 with any questions.

Limitations

THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,

IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

Who is covered?

The Company extends this warranty to the original retail purchaser of products

purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or

Canada. This warranty is not transferable or assignable. Proof of purchase is

required in the form of an original sales receipt.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED

WARRANTIES,

INCLUDING

ANY

IMPLIED

WARRANTY

OF

MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS

WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY

HEREUNDER

INCLUDING

ANY

IMPLIED

WARRANTY

OF

What is covered?

MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24

MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. No person or representative is authorized to

assume for the Company any liability other than expressed herein in connection

with the sale of this product.

The Company warrants that should this product or any part thereof, under normal

use, be proven defective in material or workmanship within 12 months from the

date of original purchase, such defect(s) will be repaired or replaced with a new or

reconditioned product (at the Company's option) without charge for parts and

repair labor.

What is not covered?

This Warranty does not cover the following:

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above

limitations or exclusions may not apply to you. This Warranty gives you specific

legal rights and you may also have other rights which vary from state to state.

•

Damage incurred during shipping or transporting the product to the

Company or a service center

•

Elimination of car static or motor noise

Defects in cosmetic, decorative or non-operative structural parts

Correction of antenna problems

Costs incurred for installation, removal or reinstallation of the product

Consequential damage to compact discs, USB devices, digital media

cards, accessories or vehicle electrical systems

Obtaining Warranty Service

•

To obtain repair or replacement within the terms of this Warranty,

call 1-800-323-4815 for the location of a warranty station serving

your area.

•

Damage caused by improper installation, mishandling, misuse, neglect,

accident, blown fuse, battery leakage, theft or improper storage

Products whose factory serial number/bar code label(s) or markings

have been removed or defaced

Damage resulting from moisture, humidity, excessive temperature,

extreme environmental conditions or external natural causes

•

You must prepay the initial shipping charges to the Company.

The Company will pay the return shipping charges for all

warranteed products returned to an address within the U.S.A.,

Puerto Rico or Canada.

Please package the product securely to avoid shipping damage.

We recommend using a carrier that provides tracking service to

prevent lost packages. Lost or damaged packages are not

covered by this warranty.

•

Please review the “Care and Maintenance” section of your Installation

and Operation Manual for additional information regarding the proper

use of your product.

Provide a detailed description of the problem(s) for which you

require service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audiovox Electronics Corporation

Hauppauge, NY 11788

Technical Assistance: 1-800-323-4815

www.jensen.com

Ver. 032907

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Download.