Jensen Digital Camera KT7009A User Manual

ULTRA THIN 3.2 MEGA PIXEL DIGITAL CAMERA  
OWNER’S MANUAL  
KT7009A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Expand Contents

SAFETY PRECAUTIONS  
-
-
Before using the camera, please ensure that you read and understand the safety precautions  
described below. Always ensure that the camera is operated correctly.  
The safety precautions noted on the following pages are intended to instruct you in the safe and  
correct operation of the camera and its accessories to prevent injuries or damage to yourself, other  
persons and equipment.  
WARNINGS  
-
-
Do not point the camera directly into the sun or at other intense light source that could damage  
your eyesight.  
Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light  
produced by the flash may damage eyesight. In particular, remain at least 39 inches (1 meter)  
away from infants when using the flash.  
-
-
Store this camera out of the reach of children and infants. Accidental damage to the camera by a  
child could result in serious injury. In addition, placement of the strap around the child’s neck could  
result in asphyxiation.  
Do not attempt to disassemble or alter any part of the camera that is not expressly described in  
this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal  
inspections, alterations and repairs should be only be conducted by qualified service personnel  
authorized by your camera distributor.  
-
-
To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it  
has been damaged. Similarly, never touch internal portions of the camera that become exposed as  
a result of damage. There is a risk of high-voltage electrical shock. Please consult your camera  
distributor for repair.  
Do not allow the equipment to come into contact with, or become immersed in, water or other  
liquids. Do not allow liquids to enter the interior of the camera. The camera is not waterproof. If the  
camera exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In  
the event that water or other foreign substances enter the interior, immediately turn the power off  
or unplug the power cord from the electrical outlet. Continued use of the equipment may result in  
fire or electrical shock. Please consult your camera distributor for repair.  
Do not use substances containing alcohol, benzene, thinners or other flammable substances to  
clean or maintain the equipment. The use of these substances may lead to fire or could  
permanently damage the camera.  
-
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONS  
-
Avoid using, placing or storing the camera in places that are subject to strong sunlight or high  
temperatures, such as a car dashboard or trunk. Exposure to intense sunlight and heat may cause  
the internal batteries to leak, overheat or explode, resulting in possible fire, burns or other injuries.  
High temperatures may also cause the case to warp and deform. Ensure that there is good  
ventilation when using the compact power adaptor to charge or power the camera.  
Do not store the camera in humid or dusty areas. Storage in such areas can damage the internal  
circuitry and could lead to fire, electrical shock or other damage.  
When wearing or holding the camera by the strap, be careful not to drop or subject it to strong  
impacts or shocks that could lead to personal injury or possibly damage the camera.  
Be careful not to cover the flash with your fingers when shooting. In addition, do not touch the  
surface of the flash after taking several pictures in rapid succession. Either action could result in  
burns.  
-
-
-
-
If your camera is used for a prolonged period of time, the camera body may become warm to the  
touch.  
Preventing Malfunctions  
-
Avoid Strong Magnetic Fields  
Never place the camera in close proximity to electric motors or other equipment generating strong  
electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt  
image data.  
-
Avoid Condensation Related Problems  
Moving the equipment rapidly between hot and cold temperatures may cause condensation (water  
droplets) to form on the cameras external and internal surfaces. You can avoid this by placing the  
equipment in an airtight, re-sealable plastic bag and letting it adjust to temperature changes slowly  
before removing it from the bag.  
-
If Condensation Forms Inside the Camera  
Stop using the camera immediately if you detect condensation. Continued use may damage the  
equipment. Remove the SD card from the camera and wait until the moisture evaporates  
completely before resuming use.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location of Controls  
Top View  
1. Shutter (OK) button  
2. Power On/Off Button  
3. Reset Hole  
Front View  
1. Lens  
2. Flash Strobe Window  
3. Self-timer LED  
Right Side  
1. Strip holder  
2. SD Card slot  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Back view  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Mode button  
Menu button  
Power / Flash / Charging Status LED (Bi-color)  
LCD Screen  
Left ( ) key  
Right (Disp) key  
Up (Zoom In) key  
Down (Zoom Out) key  
Bottom View  
1. USB jack  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1. Getting Started  
10  
10  
10  
10  
11  
11  
12  
12  
12  
13  
What Can I do with my Camera?  
What can I do with my Digital Pictures?  
What can I do with my Video clips?  
Camera Package Contents  
Insert and remove SD (Secure Digital) Card  
Turning the Camera On and Off  
Checking the Battery Level  
Charging the internal Lithium Battery  
Camera Mode Selection  
2. Camera Settings  
14  
14  
15  
15  
15  
16  
16  
16  
17  
17  
Checking Camera Status  
Setting Date & Time  
Setting Language  
Format Storage  
USB Connection  
Setting Auto Power off  
Setting Light Frequency  
Setting Default  
System Information  
3. Taking Pictures  
18  
18  
18  
18  
18  
19  
19  
20  
20  
21  
21  
22  
Taking a Picture  
Taking Picture under dim light  
Taking Pictures with Flash Strobe  
Taking Picture with Digital Zoom  
LCD Display ON/OFF  
Setting Picture Quality  
Setting Exposure Value  
Setting White Balance  
Setting Single / Multiple Snapshot  
Setting Self-timer  
Setting Time Stamp  
4. Recording Video Clips  
Recording a Video Clip  
23  
23  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Video with Digital Zoom  
LCD Display ON/OFF  
Setting Video Quality  
Setting Exposure Value for Video Recording  
Setting White Balance for Video Recording  
23  
23  
23  
24  
24  
5. Reviewing Pictures and Video clips  
26  
26  
26  
26  
27  
27  
28  
28  
28  
Thumbnail Display and Viewing  
Viewing Pictures with Digital Zoom  
Viewing Video Clip  
Slide Show  
Delete File  
Delete ALL  
Protect (Lock) Picture / Video file  
Digital Print ordering on Printer via SD Card  
6. Computer System Requirement  
29  
7. Hello Kitty Studio (For Windows® User Only)  
30  
30  
30  
30  
31  
31  
How to Install Hello Kitty Studio  
Uninstalling your Hello Kitty Studio  
How to Install Hello Kitty Camera Driver  
Uninstalling Camera Driver (for Windows® Users Only)  
How to Use Hello Kitty Studio  
8. Installing the Software to your Computer  
34  
34  
36  
Installing the Software  
Software Included with your Camera  
9. Transferring Pictures and Video Clips to a Computer  
10. Using the Camera as a Web Cam (for Windows® Users Only)  
11. Troubleshooting Guide  
37  
38  
39  
12. Appendix  
41  
41  
Regulatory Information  
13. Specifications  
42  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Care and Maintenance  
15. Getting Help  
43  
43  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Getting Started  
What can I do with my Camera?  
Enjoy point-and-shoot operation. Store pictures and video clips  
to a SD card.  
Capture  
Set Up  
Select various camera settings.  
What can I do with my Digital Pictures?  
View  
View the pictures on a computer.  
Save the pictures to a computer memory by Mass Storage  
interface.  
Save  
E-mail  
Send the pictures over the Internet to family and friends.  
What can I do with my Video clips?  
Playback  
Application  
Play back of video clips on a computer using your system  
default video.  
Save video clips to the computer memory by Mass Storage  
interface.  
Save  
E-mail  
Send the video clips over the Internet to family and friends.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera Package Contents  
Carrying Case  
USB Cable  
Warranty Card  
User Manual  
Neck strap  
CD-ROM  
CDROM contains the following software:  
a.)  
b.)  
c.)  
Hello Kitty Studio  
PC Camera Driver (for Windows ® users)  
ArcSoft PhotoStudio Application software. (for Windows ® users)  
Inserting the SD (Secure Digital) Card  
This camera has 16MB of internal memory, but it’s recommended you use a larger capacity SD card if you  
would like to take more pictures and longer videos. If inserting an SD card before taking pictures or  
recording video clips, then the SD card is default storage media. Turn off the camera before inserting or  
removing the SD card. Be sure to orient the card correctly when inserting it. Never try to force the SD card  
into the slot when you feel resistance. The SD card has a write protect switch, which you can use to  
prevent data from accidental deletion; therefore, disable the write protection beforehand whenever you  
want to record, format or delete files in the SD card.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
2.  
Power off the camera and turn the camera SD Card slot faces you.  
Inserting the SD card, ensuring you orient it correctly — please see the silkscreen beside the SD  
card socket. To remove the SD card, push the SD card inside and the SD card is released from  
the slot.  
3.  
Power on the camera again and ready for picture shoot or video recording.  
IMPORTANT:  
The camera will be turned off automatically for protection if SD Card is inserted or removed when  
the camera power is on.  
Never insert any other object which is not SD card into the camera’s SD card slot. Doing so will  
create the risk of damaging to the camera and the card.  
Make sure that the terminals of the SD card are facing towards the same side of the LCD.  
Should water or any foreign object ever get into the card slot, immediately turn off the camera and  
then contact your dealer or nearest service provider.  
Turning the Camera On and Off  
To turn on the camera, fully press and hold the Power button until the power indicator lights up. Press and  
hold the Power button again to turn off the camera.  
Checking the Battery Level  
Check the battery power level before taking pictures.  
1. Turn on the camera.  
2. Check the battery status level that appears on the LCD screen.  
Batteries have adequate power.  
Batteries have only limited power to support in a short time.  
When running out of battery power, the icon will blink for 5 seconds and camera will be turned  
off automatically. This indicates the battery need to be recharged.  
Charging the internal Lithium Battery  
A rechargeable battery is integrated in the camera. When the camera displays “  
“ icon in blinking and  
is turned off automatically, it means all the battery energy is used up. Please follow the following steps to  
recharge the battery.  
IMPORTANT:  
Battery charging is active only when the camera power is switched off.  
It is normal that the camera feels slightly warm while recharging the internal battery.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recharging the Battery with the USB Port of your PC:  
1.  
2.  
Switch off the camera.  
Connect the camera to the USB Port on your PC with the USB cable (included). The charging  
indicator will light red.  
3.  
4.  
After a period of time, the charging indicator will turn off. That means the battery has been fully  
charged.  
Disconnect the camera from your PC and then remove the USB cable.  
Note:  
1. The camera will be switched off automatically for battery charging if the USB cable from PC is  
inserted when the camera power is on.  
2. Please fully recharge the built-in battery for up to 10 hours before you use the camera for the  
first time after purchase. The internal battery should last for the life of the camera, but as is the case  
with all rechargeable batteries the actual charge held may decline with use.  
Camera Mode Selection  
Turn on the camera, press “Mode” button to the main menu of camera.  
User can select the mode of camera for “Photo Snapshot”, “Video Recording”, “Photo & Video Playback”  
and “Camera Configuration”.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Camera Settings  
Checking Camera Status  
Turn on the camera, and view the camera LCD screen to check which camera settings are active. If the  
feature icon is not displayed, it means that particular feature is not activated.  
Image Quality  
Image Resolutions  
Camera Status  
Other Features  
Self-timer  
Flash Tube condition  
H
M
L
High:  
Medium: 1600 x 1200  
Low: 800 x 600  
2048 x 1536  
Video Recording mode  
Auto  
On  
Off  
Video Resolutions  
CIF 320 x 240  
Photo Capture mode  
0015 / 0017 Number of  
picture displayed  
VGA 640 x 480  
Battery Status  
1.00 ~ 4.00 Zoom in/out  
Full  
SD Card inserted  
Low level  
0003  
taken  
Pictures can be  
Empty  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Date & Time  
The current date and time can be recorded, and stored with the images or video clips.  
It is also be used to make Date / Time Stamp on picture.  
You can change the Date & Time setting by the following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Select “Date & Time Setting”, then use “Up” and “Down” key to increase and decrease the setting value.  
Use “Left” and “Right” key to choose setting item “mm”, “dd”, “yyyy” and “hour”, “min”, “sec”.  
Setting Language  
Under this setting, you can select the language you prefer for the LCD screen.  
(Japanese)  
(Simplified Chinese)  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “Language”, then use “Left” and “Right” key to choose the language.  
Format Storage  
Formatting the SD Card or on board memory will erase all pictures and video clips, remove the SD card  
during formatting may damage the card.  
You can format the storage media by following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “Format Storage”, press “OK” button to select format storage media function. Confirm to format  
start, press “OK” button. Otherwise, press “Menu” button to return menu without format.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
During format, the LCD displays “Formatting Please Wait”.  
After format, the menu is back again. In the Playback mode, LCD will show “NO IMAGE” on screen.  
USB Connection  
To check the available USB connection, it can be performed by following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “USB Connection”, the available USB connection is indicated on LCD.  
Use “Left” and “Right” key to choose between “PC Cam” and “Mass Storage” mode for USB connection.  
Setting Auto Power Off  
Your camera is designed to switch off automatically after 1 minutes of inactivity. You can change the Auto  
power off setting by the following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “Auto Power Off”, then use “Left” and “Right” key to choose “30 sec”, “1 Min”, “3 Min” or “5 Min”.  
Setting Light Frequency  
In order to take a better indoor picture, the camera needs to be set to suit the correct lighting frequency. Set  
the frequency to 60Hz for USA and Japan, and 50 Hz for Europe and Asia.  
50Hz Frequency  
60Hz Frequency  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “Light Freq.”, select between “50Hz” and “60Hz” light frequency.  
Setting Default  
The camera settings can restore to factory default by following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “Default Setting”, press “OK” button to allow camera setting restore to factory default.  
System Information  
The camera firmware version can be obtained by following steps:  
Turn on the camera, press “Mode” button and select “Configuration” Menu.  
Go down to “System Info.”, press “OK” button and the camera firmware version will be displayed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Taking Pictures  
Taking a Picture  
1.  
2.  
3.  
Turn on the camera and make sure it is in Capture mode. Now is ready to take pictures.  
Frame your subject using the LCD screen.  
Press the Shutter button to take a picture, holding the camera steadily. One beep will sound when  
the picture has been taken.  
Taking Picture under dim light  
When the picture for shoot is not bright enough, the picture may be captured with blur image if the camera  
is held by hand. Hand shaking icon is blinking on LCD as an alert to user. Fixed the camera firmly in place,  
turn camera viewing to brighter direction or turn on flash strobe can prevent capturing with blur image.  
Taking Pictures with Flash Strobe  
Normally the outdoor and indoor pictures are taken under the “Off” flash mode as it is the default setting.  
If the background is too dark, the user needs to turn the flash strobe on and off manually for background  
requirement.  
Turn on the camera and make sure it is in Capture mode.  
Press “Left ( )” key and select between “Auto”, “On” and “Off” flash mode.  
Flash mode setting will be displayed on LCD.  
Auto  
On  
Off  
During flash is charging and not ready, the charging LED is blinking and LCD screen is turned off in order  
for full energy charging.  
Taking Pictures with Digital Zoom  
The camera is designed with 4x digital zoom in both still image mode and video mode. This feature lets you  
zoom in on the center area of a photo and photograph only the enlarged portion of the picture.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital zoom applies to all still pictures until you manually turn it back, and can be continuously in video  
mode.  
Zoom +  
Zoom -  
Turn on the camera and make sure it is in Capture mode.  
Press the “Up (Zoom In)” or “Down (Zoom Out)” key to zoom in and out.  
LCD Display ON/OFF  
The LCD can be turned on or off manually according to the desire from user. It can save battery energy  
when the LCD is turned off.  
Turn on the camera and make sure it is in Capture mode.  
Press the “Right (Disp)” key to turn “Disp ON with OSD”, “Disp ON without OSD” or “Disp OFF”.  
Setting Picture Quality  
L
M
H
Picture quality depends on both its resolution and the JPEG file compression that the camera applies when  
the picture is taken. Higher resolution make better quality which occupies more memory space. Smaller  
size pictures in lower resolution are easier to email, while larger size pictures in higher resolution are better  
for printing.  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Picture Quality” in the menu on the LCD  
Screen, then use “Left” and “Right” to choose the size you prefer (800x600, 1600x1200, 2048x1536).  
Here is the approximate number of pictures you can expect the camera to hold based on the 16MB NAND  
FLASH Memory:  
L
M
H
800x600: Low resolution approximately 116 pictures.  
1600x1200: Medium resolution approximately 28 pictures.  
2048x1536: High resolution approximately 17 pictures  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The numbers are also be influenced by the complexity of the picture.  
Scene complexity affects a picture’s file size. For example, the file size of a picture with trees in  
autumn is larger than that of the blue sky at the same resolution setting. Therefore, the number of pictures  
you can store in the memory may vary.  
Setting Exposure Value  
Similar to white balance, sometimes to obtain better image quality, the user can use manually select the  
exposure accompanied with the white balance.  
Current in this camera, there are 9 exposure value offset levels: from -2 till +2, 0.5EV each step. To  
manually select the exposure level, please do as following.  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Exposure Value” in the menu on the  
LCD Screen, then use “Left” and “Right” to choose the EV setting you prefer. In normal condition, the EV is  
set to “0”.  
Setting White Balance  
The sensor of the camera has different light sensitivity in different circumstances. The camera has  
designed to have auto white balance function. However, it also has the feature to let the user to select the  
white balance mode in daylight, cloudy, tungsten and fluorescent to get the best image quality performance.  
To change the white balance mode, the user need:  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “White Balance” in the menu on the LCD  
Screen, then use “Left” and “Right” to choose “AWB”, “Sunny”, “Cloudy”, “Tungsten”, “Fluorescent 1” and  
“Fluorescent 2”.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Apply “Fluorescent 1” under traditional fluorescent lamp.  
Apply “Fluorescent 2” under high intensity fluorescent lamp.  
Apply “AWB” for auto white balance setting or when you are not sure what is the best option to set.  
Setting Single / Multiple Snapshot  
The shutter button can act as a normal shutter for single picture shooting. This camera also supports  
multiple shooting by a single shutter key press.  
Single Snapshot  
Burst Snapshot  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Burst Snapshot” in the menu on the  
LCD Screen, then use “Left” and “Right” to choose between “Single” or “Burst” snapshot.  
The multiple snapshot operates with 3 picture capturing sequentially. It supports only with 800x600  
resolution picture.  
Setting Self-timer  
Your camera is designed with a self-timer function, which allows you to take pictures with built-in timer.  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Self timer” in the menu on the LCD  
Screen, then use “Left” and “Right” to choose self-timer interval setting of “OFF”, “10 sec”, “15 sec” or “20  
sec”.  
Press “Menu” button again to exit menu setting. Next time while taking a picture, the camera will count  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
down the time interval after the shutter key pushed for photo taking. The Self-timer function is only applied  
to next picture. When the self-timer is activated, the camera beeps and the self-timer LED turns red and  
blinks for each second during count down before the picture is taken. Please place the camera on a flat  
surface or use a tripod.  
Setting Time Stamp  
Time Stamp can be imprinted on the picture. “Date Only” or “Date & Time” can be selected.  
Turn on the camera and make sure it is in Capture mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Time Stamp” in the menu on the LCD  
Screen, then use “Left” and “Right” to choose “OFF”, “Date Only” or “Date & Time”.  
Time Stamp: OFF  
Time Stamp: Date Only  
Time Stamp: Date & Time  
.
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Recording Video Clips  
Recording a Video Clip  
1.  
2.  
3.  
4.  
5.  
Turn on the camera and make sure it is in Video Recording mode. Now is ready to record video.  
Frame your subject using the LCD screen.  
Press the Shutter button to start video recording.  
The recorded time appears on the LCD for recorded video.  
Press the Shutter button again to stop the video recording if you complete, or memory full.  
Before recording a video clip, make sure the memory has adequate free space.  
Note: Audio is not included on video recording so the recorded AVI file has not audio.  
Recording Video with Digital Zoom  
The camera is designed with 4x digital zoom in both still image mode and video mode. This features lets  
you zoom in on the center area of video and photograph only the enlarged potion of the picture. Digital  
zoom applies to all still pictures until you manually turn it back, and can be continuously in video mode.  
Zoom +  
Zoom -  
Turn on the camera and make sure it is in Video Recording mode.  
Press the “Up (Zoom In)” or “Down (Zoom Out)” key anytime to zoom in and out.  
LCD Display ON / OFF  
The LCD can be turned on or off manually according to the desire from user. It can save battery energy  
when the LCD is turned off.  
Turn on the camera and make sure it is in Video Recording mode.  
Press the “Right (Disp)” key to turn “Disp ON with OSD”, “Disp ON without OSD” or “Disp OFF”.  
Setting Video Quality  
Higher resolution make better quality which occupies more memory space. Smaller size videos in lower  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
resolution are easier to email, while larger size videos in higher resolution are better for viewing quality.  
CIF: 320x240  
VGA: 640x480  
Turn on the camera and make sure it is in Video Recording mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Video Resolution” in the menu on the  
LCD Screen, then use “Left” and “Right” to choose between the resolution of CIF (320x240) or VGA  
(640x480).  
Setting Exposure Value for Video Recording  
Similar to white balance, sometimes to obtain better image quality, the user can use manually select the  
exposure accompanied with the white balance.  
Current in this camera, there are 9 exposure value offset levels: from -2 till +2, 0.5EV each step. To  
manually select the exposure level, please do as following.  
Turn on the camera and make sure it is in Video Recording mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Exposure Value” in the menu on the  
LCD Screen, then use “Left” and “Right” to choose the EV setting you prefer. In normal condition, the EV is  
set to “0”.  
Setting White Balance for Video Recording  
You may also set the White Balance during the Video Mode. The operation is identical to that in Capture  
mode. Once the White Balance is set, it influences both capture mode and Video mode.  
The sensor of the camera has different light sensitivity in different circumstances. The camera has  
designed to have auto white balance function. However, it also has the feature to let the user to select the  
white balance mode in daylight, cloudy, tungsten and fluorescent to get the best image quality performance.  
To change the white balance mode, the user need:  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on the camera and make sure it is in Video Recording mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “White Balance” in the menu on the LCD  
Screen, then use “Left” and “Right” to choose “AWB”, “Sunny”, “Cloudy”, “Tungsten”, “Fluorescent 1” and  
“Fluorescent 2”.  
Apply “Fluorescent 1” under traditional fluorescent lamp.  
Apply “Fluorescent 2” under high intensity fluorescent lamp.  
Select “AWB” for auto white balance setting or when you are not sure what is the best option to set.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Reviewing Pictures and Video Clips  
Thumbnail Display and Viewing  
Turn on the camera and make sure it is in Playback mode.  
Press “OK” button to display 6 pictures of thumbnail for picture or video. Use “Up”, “Down”, “Left” and  
“Right” keys to select thumbnail for playback or go to next / previous thumbnail page. The cursor on  
selected thumbnail indicates icon to represent picture file or video file on the bottom. Press “OK” button for  
picture or video viewing.  
Thumbnail of Picture file (JPG)  
Thumbnail of Video file (AVI)  
Viewing Pictures with Digital Zoom  
The camera is designed with 4x digital zoom on captured pictures for viewing on LCD. This feature lets  
you zoom in on the center area of photo and photograph only the enlarged portion of the picture.  
Zoom +  
Zoom -  
Turn on the camera and make sure it is in Playback mode.  
Select picture file via thumbnail as procedure stated on thumbnail display.  
Press the “Up (Zoom In)” or “Down (Zoom Out)” key to zoom in and out.  
Viewing Video Clip  
Turn on the camera and make sure it is in Playback mode.  
Select video file via thumbnail as procedure stated on thumbnail display.  
Use “Up” and “Down” keys to select following function for video playback.  
Use “Left” and “Down” keys to select previous or next picture/video file.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Previous file (“Left” key)  
Rewind  
Pause  
Normal playback  
Fast forward  
Next file (“Down” key)  
Slide Show  
A series of pictures can be viewed as slide show during playback.  
Turn on the camera and make sure it is in Playback mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Slide Show” in the menu on the LCD  
Screen, press “OK” button to start the picture slide show. Press any key to stop the slide show.  
Note: This function cannot use on video clips. To playback the video clips, please refer  
“Viewing Video Clip”.  
Delete File  
Picture or Video file can be deleted as following steps.  
Turn on the camera and make sure it is in Playback mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Delete” in the menu on the LCD Screen,  
press “OK” button to select delete file function. Confirm to delete, press “OK” button. Otherwise, press  
“Menu” button to return menu without delete file.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete All  
All Picture and Video files can be deleted with a single step as described below.  
Turn on the camera and make sure it is in Playback mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Delete ALL” in the menu on the LCD  
Screen, press “OK” button to select delete file function. Confirm to delete all, press “OK” button. Otherwise,  
press “Menu” button to return menu without delete any file.  
Protect (Lock) Picture / Video file  
File can be marked protect so as to prevent erase the file by “Delete” or “Delete All” function.  
Turn on the camera and make sure it is in Playback mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Protect” in the menu on the LCD Screen,  
then use “Left” and “Right” to choose protect file “ON” or “OFF”.  
Digital Print ordering on Printer via SD Card  
The camera supports DPOF function. User can mark the picture that is wanted for digital printing on printer  
function. After marked with digital print, the SD Card can be inserted into the printer that supports DPOF  
function for digital print only on those file marked with digital print “ON”.  
Turn on the camera and make sure it is in Playback mode.  
Press “Menu” button and use “up”/ “down” button till the cursor on “Print” in the menu on the LCD Screen,  
then use “Left” and “Right” to choose file for digital print order “ON” or “OFF”.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
Computer System Requirement  
For acceptable picture transfer and editing, following minimum requirement is recommended:  
For Windows Users (PC)  
Compatible with Microsoft® Windows® 98SE, ME, 2000 or XP  
Pentium IV 1.2GHz or equivalent processor  
USB port  
128MB RAM (256M recommended)  
600MB free disk space  
24 bit true colour graphic capability or above  
CD-ROM drive  
Standard mouse and keyboard  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Hello Kitty Studio (For Windows® User Only)  
IMPORTANT:  
Please backup all the necessary data before any driver/software installation.  
Our CD-ROM is tested and recommended to use under English Windows OS.  
MAKE SURE YOU INSTALL ALL THE SOFTWARE FROM THE CD SUPPLIED BEFORE YOU  
CONNECT YOUR CAMERA TO A COMPUTER.  
If the computer requests you to insert the windows set up CD during the software installation, place  
the Windows CD into the computer CD-ROM drive. The computer will install the necessary files from  
the CD automatically. After the installation is completed, remove the Windows setup CD and stored  
safely.  
How to Install Hello Kitty Studio  
1.  
Insert the CD-ROM disc into the CD-ROM drive and close  
the CD-ROM drawer.  
Installation wizard will automatically launch.  
2.  
3.  
Click the “Install Hello Kitty Studio Photo Fun & Games”  
icon.  
4.  
5.  
Follow the instructions presented on the screen to  
complete the installation.  
Click “OK” to complete the installation wizard.  
Uninstalling your Hello Kitty Studio  
1.  
2.  
Re-insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM drawer.  
Installation wizard will automatically launch.  
3.  
4.  
5.  
Click the “Uninstall Hello Kitty Studio Photo Fun & Games” icon.  
Follow the instructions presented on the screen to uninstall the Hello Kitty Studio.  
Click “OK” to complete the uninstalling wizard.  
How to Install Hello Kitty Camera Driver  
1.  
2.  
Insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM drawer.  
Installation wizard will automatically launch.  
3.  
4.  
5.  
6.  
Click the “Install Hello Kitty Camera Driver” icon.  
Follow the instructions presented on the screen to complete the installation.  
Click “OK” to complete the installation wizard.  
Restart the computer.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uninstall Camera Driver (for Windows® Users Only)  
1.  
2.  
3.  
4.  
5.  
Unplug the camera from your PC  
Go to Windows® Control Panel  
Double click Add/Remove programs  
In Add/Remove programs, select “STK014_V2.01” and click the remove button.  
Restart the computer.  
How to Use Hello Kitty Studio  
Photo Library  
Use the photo library to manage your photos. Use the import  
buttons to select and import photos into the Hello Kitty Studio  
program.  
When photos are imported, they are organized by category.  
The categories correspond to the name of the folder where  
the original photo resides.  
Once photos are imported, you can select one or more  
photos for editing or printing.  
Edit Center  
Use any of the 18 editing tools to modify your photo. Then  
save your edited photo for future use in the Hello Kitty  
Studio.  
Note:  
Your original photo will not be altered when you use the edit  
center.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Print Center  
Select one or more photos from the Photo Library, then go  
to the print center to print or export them.  
Hello Kitty Studio offers several printing formats and print  
options including layouts, image names and photo frames.  
Use the export option in the print center to save a copy of  
the photo to your computer in .jpg or .pdf format. Choose the  
reduced option to create a smaller file that works better with  
e-mail.  
Slide Show  
Select a category of Hello Kitty Studio photos for a slide  
show. Page through the photos one by one, or select the  
auto-play option to display the photos automatically.  
Story Maker  
Create a story using your Hello Kitty Studio photos. Then  
save your story or export it to your computer as a .jpg  
or .pdf file. Choose from 5 colorful Hello Kitty templates.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game Center  
Play 5 great games that use your photos in the game!  
Choose from Pixel Paddle, Photo Jigsaw, Click Flip,  
Shutter Bug or Photo Tiles.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.  
Installing the Software to your Computer  
Installing the Software  
For Windows® Users:  
IMPORTANT:  
Please backup all the necessary data before any driver/software installation.  
Our CD-ROM is tested and recommended to use under English Windows OS.  
MAKE SURE YOU INSTALL ALL THE SOFTWARE FROM THE CD SUPPLIED BEFORE YOU  
CONNECT YOUR CAMERA TO A COMPUTER.  
If the computer requests you to insert the windows set up CD during the software installation, place  
the Windows CD into the computer CD-ROM drive. The computer will install the necessary files from  
the CD automatically. After the installation is completed, remove the Windows setup CD and stored  
safely.  
1.  
2.  
3.  
Before you begin, close all other software applications open on your computer.  
Insert the CD supplied into the CD-ROM drive.  
Click “Exit” to quit the auto run “Hello Kitty Studio”.  
4.  
Double-click the “Setup.exe” under “Photostudio” folder to start setup progress of the software  
and follow the on screen instructions till “Finish” choice on the screen. Please see the following  
graphs.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
Click “Finish” to complete the installation of the software.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Included with your Camera  
The software CD contains the following software:  
1. PC Camera Driver (For Windows® Users Only)  
This is a MS Windows driver for the camera. After installing this driver and restarting Windows, the digital  
camera can be used as a PC webcam function. It can link with common video capturing software.  
2. Arcsoft PhotoStudio® 5  
Arcsoft PhotoStudio® 5 is a full-featured, easy to use digital-editing program that provides a complete set  
of photo editing and retouching tools, plus a wide selection of special effects and enhancements, its  
powerful include a wide variety of input and output options, layers, multiple undo and redo functions, image  
management tools, editable text, multiple file format support and a lot more.  
3. Hello Kitty Studio (For Windows® Users Only)  
Hello Kitty Studio is designed for your complete Hello Kitty experience; you can print, email and share your  
Hello Kitty digital creations!  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Transferring Pictures and Video Clips to a Computer  
1.  
Make sure the USB Connection under the “Configuration” Menu has been set to “Mass Storage”  
mode. Otherwise, change it to “Mass Storage” according to the procedure described in “Camera  
Settings” chapter. Turn OFF the power of camera.  
2.  
3.  
Connect USB cable to your computer USB port.  
Connect other end of USB cable to the camera while the camera is power OFF.  
For Windows Users (PC)  
Turn on the camera and LCD displays a mass storage drive icon:  
1.  
2.  
3.  
4.  
5.  
System will automatically recognize a MASS STORAGE drive.  
Double click on “My computer” icon on your desktop and then you can see a “Removable Disk” drive  
Double click on “Removable Disk” ->Double click on “DCIM”-> Double click on “100CRESI”  
Double click on the images or videos to view.  
All the pictures and video clips are in the 100CRESI folder. Highlight the pictures and video clips that you  
choose and drag them into a folder of your choice. You can also create sub-folder to group them or use the  
image processing software to edit and manage pictures.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Using the Camera as a Web Cam (For Windows® Users Only)  
IMPORTANT: For Windows® Users  
Before you connect your digital camera to the computer, make sure that you have installed the software  
from the enclosed CD. Please refer to previous chapter: “Install the software to your computer”.  
1.  
Make sure the USB Connection under the “Configuration” Menu has been set to “PC Cam”  
mode. Otherwise, change it to “PC Cam” according to the procedure described in “Camera  
Settings” chapter. Turn OFF the power of camera.  
2.  
3.  
4.  
Connect USB cable to your computer USB port.  
Connect other end of USB cable to the camera while the camera is power OFF.  
Turn on the camera and LCD displays a PC Cam icon.  
5.  
6.  
System will automatically recognize the PC Cam.  
From Windows Startup Menu, click “Program”, then -> “ArcSoft PhotoStudio 5” ->  
“PhotoStudio 5”.  
7.  
Click “File” and make sure the “Select Source” has selected “STK014 Camera”. Click  
“Acquire” -> “Acquire normally”. The window containing live video from PC Cam is  
appeared on screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Troubleshooting Guide  
Problem  
No power  
Symptom  
Camera will not  
turn on  
Likely Cause  
Battery is flat  
Solution  
Recharge the  
battery via USB  
No sufficient power  
Picture-taking  
The battery indicator  
icon on the LCD will go  
“Blank”  
Battery voltage is low to  
the automatically shut  
down level  
Charge the battery  
Image appears blurred  
or dark  
The camera or subject  
was moving when the shot  
was taken  
Hold the camera  
firmly  
The subject is too close  
Move away from  
the subject  
The lens is dirty  
Clean the lens with  
a soft cloth  
Flash does not go off  
as expected  
Flash has not finished  
charging  
Wait until the Flash  
Icon is steady  
The flash has been turned  
off  
Make sure the flash  
is set to Automatic  
or ON  
Camera will not focus  
Subject is not in the center  
of the LCD (preview)  
Move the subject to  
the center of the  
LCD (preview)  
Turn on the camera  
Cannot take pictures  
when the shutter  
button is pressed  
Camera is not turned on  
No space on the SD card /  
internal memory  
Delete unwanted  
files or insert a new  
SD card  
The camera has timed out  
Turn the camera on  
Camera hang up  
during operation  
Preview function can  
work, but no other key  
functions  
Preview function occupy  
too large internal space of  
camera  
Use a sharp end  
spurn to press  
reset hole.  
PC Connection  
PC does not recognize  
the camera  
Check the USB cable  
connection  
Make sure both  
ends of the USB  
cable are  
connected  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Interference from other  
USB devices  
Disconnected other  
USB devices  
Check computer  
Connect the  
camera to the PC  
with the USB cable  
and select [My  
Computer] –  
[Control Panel] –  
[System] – [Device  
Manager]. In the  
[Device Manager]  
window delete  
[Compose USB  
device] or  
[Unknown device]  
in [Other devices].  
Then disconnect  
the camera and  
install the software  
again.  
Camera  
malfunctions during  
use  
Electrostatic discharge  
interfered with the  
camera  
Check if the camera is  
connected to the PC  
Turn off the camera  
and then turn it  
back on. If  
connected to the  
PC disconnect the  
camera from the  
USB cord, and turn  
it off then on again.  
Reinstall the driver,  
or disconnect the  
crashed network  
driver and reserve  
this drive letter for  
the camera  
The removable disk  
crashes with the  
network drive  
The camera is  
detected by the  
Driver is not installed  
properly, or network driver  
connection is crash  
Windows and works  
properly. But a driver  
letter of the removable  
disk is not created  
The LCD on camera  
has frozen when insert  
a SD card into the  
camera  
No response from  
any of the function  
keys  
SD card is first use and  
not formatted  
Ensure you only  
use a new or  
Formatted SD card  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Appendix  
Regulatory Information  
Under the environment with electrostatic discharge, the product may malfunction and require user to reset  
the product.  
Under the environment with radio frequency interference, the product may malfunction and resume  
to normal operation without the interference.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Specifications  
Resolution (pixels)  
:
High – 2048 X 1536  
Medium – 1600 X 1200  
Low – 800 X 600  
Shutter Speed  
Image File Format  
:
:
1 second to 1/1000 second  
Still Images – JPEG (Exif 2.2)  
Movies – AVI without audio (for Windows® Users Only)  
16 MB Flash Memories  
SD Memory Card (maximum 256MB) (not included)  
Fixed Lens – 8.4mm Effective Focal Length  
4X  
Internal Memory  
External Memory  
Lens  
Digital Zoom  
Exposure  
White Balance  
Sensitivity  
LCD  
Interface  
Self Timer  
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Automatic  
Auto, Sunny, Cloudy, Fluorescent, Tungsten  
ISO 100  
2.0” TFT  
USB v1.1  
OFF / 10 / 15 / 20sec Selectable  
Auto / On / Off  
Windows® 98SE / ME / 2000 / XP  
30sec / 1 / 3 / 5min Selectable  
Built-in Rechargeable Battery or 5V DC from USB Port  
Flash Function  
Operation System  
Auto Power Off  
Power Source  
Operating Temperature  
Operating Humidity  
:
:
10 - 40  
20% - 85% Non-condensing  
*NOTE: Scene complexity affects an image’s file size. The number of images you can store on the  
camera or memory card may vary.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Care and Maintenance  
Camera Body:  
Wipe the body clean with a soft cloth or eyeglass lens wiper.  
Lens:  
First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens  
lightly with a soft cloth.  
Never use synthetic cleansers on the camera body or lens.  
LCD Monitor:  
Use a lens blower brush to remove the dust and dirt. If necessary, gently wipe the LCD monitor with a soft  
cloth or an eyeglass lens wiper to remove stubborn dirt.  
Never rub or press forcefully on the LCD monitor. These actions may damage it or lead to other  
problems.  
CAUTION: NEVER USE THINNERS, BENZENE, SYNTHETIC CLEANERS OR WATER TO CLEAN THE  
CAMERA. THESE SUBSTANCES MAY DISTORT OR DAMAGE THE EQUIPMENT.  
15. Getting Help  
Please refer to the instructions on the enclosed warranty card for returning your unit for service.  
Distribuito in Italia da:  
CAMOMILLA SPA  
Producer / Produzent / Producteur /  
Via Bodoni 8/12  
20090 Buccinasco (Mi)  
Tel: +39-02-48840405  
Fax: +39-02-48841725  
Produttore / Productor:  
EAGLETRON TECHNOLOGY LTD  
Stampato in Cina  
AF10-16670-000L  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jensen Car Amplifier LXA300 User Manual
Jensen Car Amplifier XA4200 User Manual
Jensen Car Stereo System XCH 6RF User Manual
Jensen Car Video System MZ7TFT User Manual
Jensen Car Video System VM9312 User Manual